SERVICE AND ADJUSTMENTS

TO REPLACE BELTS (See Fig. 21)

The auger and traction drive belts are not adjustable. If the belts are damaged or begin to slip from wear, they should be replaced. It is recommended that the belt(s) be replaced by a qualified service center.

NOTE: It is recommended that both the auger and traction drive belt be replaced at the same time.

The V-belts on your snow thrower are of special construction and should be replaced by original equipment manufacturer (OEM) belts available from your nearest dealer. Using other than OEM belts can cause personal injury or damage to the snow thrower.

WARNING: Belt replacement requires separation of the snow thrower. While separating the auger housing from the frame assembly, it is important that an assistant stand in the operating position and hold the snow thrower handles. Serious personal injury and/or damage to the unit could occur if the snow thrower should fall during the belt changing process.

FRAME

AUGER

ASSEMBLY

HOUSING

HANDLES

1.REMOVE GASOLINE FROM FUEL TANK - Drain gasoline from fuel tank into a suitable container, out- doors, away from fire or flame. Wipe up any spilled gasoline.

2.REMOVE DISCHARGE CHUTE - Loosen locknut securing chute rotator head to mounting bracket only enough to allow chute rotator head to be raised and discharge chute to be removed from snow thrower.

3.REMOVE BELT COVER - See “TO REMOVE BELT COVER” in this section of this manual.

4.REMOVE ENGINE PULLEY - Remove bolt, lockwasher and flat washer securing pulley to engine crankshaft. Remove outside (auger) pulley only from crankshaft.

5.SEPARATE SNOW THROWER - With your assistant standing in the operating position holding the handles, remove the two (2) bolts holding auger housing and frame together.

WARNING: As the last bolt is removed, have your assistant carefully lower the handles down to the ground.

6.REMOVE AUGER BELT from around pulley.

7.RELIEVE TENSION ON TRACTION DRIVE BELT IDLER and remove traction drive belt from around pulleys.

HINT: Insert a 3/8" drive ratchet (in the “ON” position) into the square hole in idler arm and rotate ratchet clockwise to relieve tension.

8.With tension relieved on idler, install new traction drive belt around pulleys and inside belt keepers.

9.Place auger belt around and inside the groove of auger pulley only.

10.While your assistant slowly raises handles to rejoin the auger housing and frame assembly, pull up on the auger belt and squeeze sides together above pulley so belt is fully seated in groove of pulley.

11.Move idler arm so it does not hit impeller pulley as you bring snow thrower completely together and check carefully for proper routing of belts. If auger belt has become dislodged from the pulley (by catching the idler arm bracket while bringing snow thrower together), separate the snow thrower and repeat step 12. Belt must be fully seated in pulley groove when bringing the snow thrower together.

12.Install the two (2) hex bolts and tighten securely.

13.INSTALL ENGINE PULLEY - Place belt in pulley groove and slide pulley on crankshaft. Install flat washer, lockwasher and bolt and tighten securely (30-35 ft. lbs. torque). Make sure belt is inside belt keeper.

14.INSTALL BELT COVER and two (2) screws. Tighten securely.

15.INSTALL DISCHARGE CHUTE – See “INSTALL DIS- CHARGE CHUTE / CHUTE ROTATER HEAD” in the Assembly / Pre-Operation section of this manual.

 

BELT KEEPER

 

 

TRACTION DRIVE BELT

 

ENGINE

FLAT WASHER

 

PULLEY

 

 

 

 

LOCKWASHER

 

 

BOLT

IDLER ARM

AUGER

SQUARE

BELT

HOLE

 

 

CLUTCHING

 

 

IDLER ARM

 

 

BRACKET

 

FRAME

AUGER PULLEY

AUGER

HOUSING

 

 

 

BOLTS

FIG. 21

17

Page 17
Image 17
Poulan 421916 owner manual To Replace Belts See Fig

421916 specifications

The Poulan 421916 is a versatile and powerful hedge trimmer designed to meet the needs of both professional landscapers and homeowners. Renowned for its efficiency and ergonomic design, this tool makes hedge trimming a more manageable and enjoyable task.

One of the standout features of the Poulan 421916 is its robust engine. Equipped with a high-performance, lightweight motor, it delivers consistent power, allowing users to handle dense and overgrown hedges effortlessly. The engine is designed for easy starting, reducing frustration during setup.

The cutting blade is another significant highlight of the Poulan 421916. It features a dual-action design that minimizes vibration during operation, providing a smooth user experience. The blades are sharpened to precision, ensuring clean cuts and promoting healthy plant growth. With a cutting capacity of around 3/4 inch, it handles thick branches with ease, offering versatility for different tasks.

In addition to its powerful engine and efficient blades, the Poulan 421916 emphasizes user comfort. It features a lightweight and well-balanced design, which reduces fatigue during extended use. The comfortable grip handles are designed to provide maximum control, allowing for precise maneuvering around landscapes of all shapes and sizes.

Safety is another crucial aspect of the Poulan 421916. It comes equipped with safety guards and a blade brake system, which halts motion when not in use. These features protect the user from accidental injuries, making it a reliable choice for anyone concerned with safety while operating power equipment.

Technologically, the Poulan 421916 utilizes advanced anti-vibration technology. This innovation considerably reduces the amount of vibration transmitted to the user's hands and arms, allowing for prolonged use without discomfort. This technology is particularly beneficial for those who may be trimming hedges for extended periods.

In summary, the Poulan 421916 is an exceptional hedge trimmer that combines power, precision, and user-friendly features. With its efficient engine, sharp dual-action blades, lightweight design, and advanced safety measures, it stands as an excellent choice for anyone looking to maintain their outdoor spaces effectively. Whether you're a professional landscaper or a homeowner, the Poulan 421916 is engineered to help you achieve neat and tidy hedges with minimal effort.