ASSEMBLY

INSTALL SEAT (See Fig. 3)

Adjust seat before tightening adjustment bolt.

Remove adjustment bolt, lock washer and flat washer securing seat to cardboard packing and set aside for assembly of seat to tractor.

Pivot seat upward and remove from the cardboard pack- ing. Remove the cardboard packing and discard.

Place seat on seat pan so head of shoulder bolt is positioned over large slotted hole in pan.

Push down on seat to engage shoulder bolt in slot and pull seat towards rear of tractor.

Pivot seat and pan forward and assemble adjustment bolt, lockwasher and flat washer loosely. Do not tighten Lower seat into operating position and sit on seat.

Slide seat until a comfortable position is reached which allows you to press clutch/brake pedal all the way down.

Get off seat without moving its adjusted position.

Raise seat and tighten adjustment bolt securely.

 

SEAT

SHOULDER

 

 

 

 

BOLT

SEAT

 

 

PAN

 

 

FLAT WASHER

 

 

LOCK WASHER

 

 

ADJUSTMENT

 

02465

BOLT

 

 

Fig. 3

NOTE: You may now roll your tractor off the skid. Follow the instructions below to remove the tractor from the skid.

WARNING: Before starting, read, understand and follow all instructions in the Operation section of this manual. Be sure tractor is in a well-ventilated area. Be sure the area in front of tractor is clear of other people and objects.

TO ROLL TRACTOR OFF SKID (See Operation section for location and function of controls)

Raise attachment lift lever to its highest position.

Releaseparkingbrakebydepressingclutch/brakepedal.

Place gearshift lever in neutral (N) position.

Roll tractor forward off skid.

Remove banding holding the deflector shield up against tractor.

Continue with the instructions that follow.

CHECK TIRE PRESSURE

The tires on your tractor were overinflated at the factory for shipping purposes. Correct tire pressure is important for best cutting performance.

Reduce tire pressure to PSI shown on tires.

CHECK DECK LEVELNESS

For best cutting results, mower housing should be properly leveled. See “TO LEVEL MOWER HOUSING” in the Service and Adjustments section of this manual.

CHECK FOR PROPER POSITION OF ALL BELTS

See the figures that are shown for replacing motion and mower blade drive belts in the Service and Adjustments sec- tion of this manual. Verify that the belts are routed correctly.

CHECK BRAKE SYSTEM

After you learn how to operate your tractor, check to see that the brake is operating properly. See “TO CHECK BRAKE” in the Service and Adjustments section of this manual.

CHECKLIST

BEFORE YOU OPERATE YOUR NEW TRACTOR, WE WISH TO ASSURE THAT YOU RECEIVE THE BEST PER- FORMANCE AND SATISFACTION FROM THIS QUALITY PRODUCT.

PLEASE REVIEW THE FOLLOWING CHECKLIST:

All assembly instructions have been completed.

No remaining loose parts in carton.

Battery is properly prepared and charged.

Seat is adjusted comfortably and tightened securely.

All tires are properly inflated. (For shipping purposes, the tires were overinflated at the factory).

Be sure mower deck is properly leveled side-to-side/ front-to-rear for best cutting results. (Tires must be properly inflated for leveling).

Check mower and drive belts. Be sure they are routed properly around pulleys and inside all belt keepers.

Check wiring. See that all connections are still secure and wires are properly clamped.

WHILE LEARNING HOW TO USE YOUR TRACTOR, PAY EXTRA ATTENTION TO THE FOLLOWING IMPORTANT ITEMS:

Engine oil is at proper level.

Fuel tank is filled with fresh, clean, regular unleaded gasoline.

Become familiar with all controls, their location and function. Operate them before you start the engine.

Be sure brake system is in safe operating condition.

Be sure Operator Presence System and Reverse Op- eration System (ROS) are working properly (See the Operation and Maintenance sections in this manual).

7

Page 7
Image 7
Poulan 424368 Install Seat See Fig, Check Tire Pressure, Check Deck Levelness, Check for Proper Position of ALL Belts

424368 specifications

The Poulan 424368 is a versatile and powerful chainsaw designed for both professionals and home users alike. Known for its reliable performance and rugged construction, this chainsaw is perfect for a variety of cutting tasks, from felling trees to pruning limbs and even light milling jobs. With several advanced features and technologies, the Poulan 424368 stands out in a competitive market.

One of the main features of the Poulan 424368 is its robust engine. It is equipped with a potent 42cc two-cycle engine that delivers impressive power, enabling users to cut through tough wood with ease. This engine is designed for optimal efficiency, ensuring that you can accomplish more with less fuel consumption. With a power output of approximately 2.8 horsepower, users can expect quick starts and consistent performance, making this chainsaw ideal for both light and heavy-duty tasks.

The chainsaw showcases a 16-inch bar, providing a perfect balance between maneuverability and cutting capacity. The length of the bar is suitable for tackling medium-sized trees and branches without compromising on the saw's agility. Additionally, the chain is designed to be low-kickback, enhancing user safety while significantly improving cutting precision.

Equipped with professional-grade features, the Poulan 424368 incorporates an easy-access air filter and a tool-free chain tensioning system. These elements contribute to simple maintenance and adjustments, allowing users to spend less time on upkeep and more time working. The primer bulb enables easy starting, reducing the frustration often associated with chainsaws.

Another notable characteristic is the ergonomic design of the Poulan 424368. It features a lightweight build with a balanced weight distribution, allowing users to operate it comfortably for extended periods. The rubberized handles provide a secure grip, ensuring that users maintain control during cutting tasks.

Safety is also a primary consideration in the design of the Poulan 424368. It includes an inertia-activated chain brake that enhances protection against accidental cuts while in operation. This feature, combined with its low vibration technology, reduces user fatigue, making it an ideal choice for extensive cutting projects.

In summary, the Poulan 424368 is a feature-rich chainsaw combining power, efficiency, and safety. With its high-performing engine, user-friendly design, and reliable safety features, it satisfies the needs of both casual users and seasoned professionals alike. Whether you are clearing debris after a storm or maintaining your landscape, the Poulan 424368 is a dependable tool that delivers exceptional results with every cut.