SERVICE AND ADJUSTMENTS

TRANSAXLE GEAR SHIFT LEVER NEUTRAL- ADJUSTMENT (See Fig. 30)

The transaxle should be in neutral when the gear shift lever is in neutral (N) (lock gate) position. The adjustment is preset at the factory; however, if adjustment is needed, proceed as follows:

•Ensure transaxle is in neutral.

NOTE: When the tractor rear wheels move freely, the transaxle is in neutral.

•Loosen adjustment bolt in front of the right rear wheel.

•Position the gear shift lever in the neutral position.

•Tighten adjustment bolt securely.

NOTE: If additional clearance is needed to get to adjustment bolt, move mower deck height to the lowest position.

 

NEUTRAL

GEARSHIFT LEVER

LOCK GATE

 

 

ADJUSTMENT

 

BOLT

Fig. 30

FRONT WHEEL TOE-IN/CAMBER

Your new tractor front wheel toe-in and camber is set at the factory and is normal. The front wheel toe-in and camber are not adjustable. If damage has occurred to affect the factory set front wheel toe-in or camber, contact a qualified service center.

TO REMOVE WHEEL FOR REPAIRS (See Fig. 31)

•Replace washers and snap retaining ring securely in axle groove.

•Replace axle cover.

NOTE: To seal tire punctures and prevent flat tires due to slow leaks, tire sealant may be purchased from your local parts dealer. Tire sealant also prevents tire dry rot and corrosion.

TO START ENGINE WITH A WEAK BATTERY (See Fig. 32)

WARNING: Lead-acid batteries gen- erate explosive gases. Keep sparks, flame and smoking materials away from batteries. Always wear eye protection when around batteries.

If your battery is too weak to start the engine, it should be recharged. (See "BATTERY" in the Maintenance section of this manual).

If “jumper cables” are used for emergency starting, follow this procedure:

IMPORTANT: YOUR TRACTOR IS EQUIPPED WITH A 12 VOLT SYSTEM. THE OTHER VEHICLE MUST ALSO BE A 12 VOLT SYSTEM. DO NOT USE YOUR TRACTOR BATTERY TO START OTHER VEHICLES.

TO ATTACH JUMPER CABLES

•Connect one end of the RED cable to the POSITIVE

(+)terminal of each battery(A-B), taking care not to short against tractor chassis.

•Connect one end of the BLACK cable to the NEGATIVE (-) terminal (C) of fully charged battery.

•Connect the other end of the BLACK cable (D) to good chassis ground, away from fuel tank and battery.

TO REMOVE CABLES, REVERSE ORDER

•BLACK cable first from chassis and then from the fully charged battery.

•RED cable last from both batteries.

•Block up axle securely.

•Remove axle cover, retaining ring and washers to allow wheel removal (rear wheel contains a square key - Do not lose).

•Repair tire and reassemble.

•On rear wheels only: align grooves in rear wheel hub and axle. Insert square key.

RETAINING WASHERS

RING

WEAK OR DEAD BATTERY

FULLY CHARGED

BATTERY

AXLE

COVER

SQUARE KEY (REAR

WHEEL ONLY)

Fig. 31

Fig. 32

20

Page 19 Page 21
Page 20
Image 20
Poulan 96042011200, 430097, PB2042YT manual Transaxle Gear Shift Lever NEUTRAL- Adjustment See Fig, Front Wheel TOE-IN/CAMBER
Page 19 Page 21

PB2042YT, 430097, 96042011200 specifications

The Poulan 96042011200,430097,PB2042YT is a highly regarded lawn tractor that offers users a blend of performance, comfort, and advanced technology, making yard maintenance easy and efficient. This model is especially designed for homeowners with medium to large-sized lawns, featuring a robust engine and a variety of functionalities to enhance the mowing experience.

One of the standout features of the PB2042YT is its powerful engine. It is equipped with a dependable gas engine that provides ample torque and speed for mowing through thick grass and uneven terrain. The tractor’s 42-inch cutting deck is wide enough to cover a significant amount of ground in a single pass, which drastically reduces mowing time. The adjustable cutting height allows users to customize the blade height from one to four inches, accommodating different grass types and preferences.

Another notable aspect of the Poulan PB2042YT is its user-friendly design. The tractor features a comfortable, adjustable seat with armrests, ensuring that users can mow their lawns without discomfort, even during extended sessions. Additionally, the control panel is intuitively designed, allowing users to easily access the ignition, throttle, and PTO (Power Take-Off) switches.

The Poulan PB2042YT also integrates advanced technology that enhances its functionality. The automatic transmission provides smooth acceleration and effortless gear changes, so users can concentrate on steering and cutting without worrying about shifting gears. Furthermore, the tight turning radius of this model makes it easy to maneuver around flower beds, trees, and garden ornaments with precision.

Safety features are also a priority in the PB2042YT. The lawn tractor comes equipped with an automatic blade shut-off system that activates when the operator leaves the seat, minimizing the risk of accidents.

In summary, the Poulan 96042011200,430097,PB2042YT is a comprehensive lawn maintenance solution that combines power, comfort, and safety features. Its versatile cutting options, user-friendly controls, and reliable engine make it an excellent choice for homeowners looking to achieve a well-maintained lawn without the hassle. Whether tackling vast lawns or intricate landscapes, this lawn tractor is designed to deliver exceptional performance and results.
Top Page Image Contents