SERVICE AND ADJUSTMENTS

WARNING: To avoid serious injury, before performing any service or adjustments:

1.Be sure the on/off switch is in the OFF position.

2.Remove safety ignition key.

3.Make sure the augers and all moving parts have completely stopped.

4.Disconnect spark plug wire from spark plug and place wire where it cannot come in contact with plug.

1.Disengage all controls and move throttle control to STOP position. Wait for all moving parts to stop.

2.Remove safety ignition key and disconnect spark plug wire from spark plug. Place wire where it cannot come in contact with spark plug.

3.Align holes in impeller hub with holes in impeller shaft and install two (2) new 1/4-20 x 1-5/8" capscrew/shear bolts. Install 1/4-20 locknuts and tighten securely.

CAUTION: Do not substitute. Use only original equipment capscrew/shear bolts as supplied with your snow thrower.

SNOW THROWER

TO ADJUST SNOW THROWER HEIGHT

See “TO ADJUST SKID PLATES” and “SCRAPER BAR” in the Operation section of this manual.

CHUTE DEFLECTOR

The chute deflector, attached to the top of the discharge chute, is provided to direct discharging snow away from the operator. If the deflector becomes damaged, it should be replaced.

WARNING: To avoid serious injury, never operate your snow thrower with the deflector removed or damaged.

To change direction and/or distance snow is discharged, see “TO CONTROL SNOW DISCHARGE” in the Op- eration section of this manual.

SHEAR BOLTS (See Fig. 21)

AUGER SHEAR BOLTS

Both right and left-hand augers are secured to the auger shaft with a shear bolt and hex nut. Should a foreign ob- ject or ice become lodged in the augers, the shear bolts are designed to break, preventing damage to any other components. If one or both augers do not turn when auger control lever is engaged, check to see if one or both of the bolts have sheared. To replace the shear bolts:

1.Disengage all controls and move throttle control to STOP position. Wait for all moving parts to stop.

2.Remove safety ignition key and disconnect spark plug wire from spark plug. Place wire where it cannot come in contact with spark plug.

3.Align hole in auger hub with hole in auger shaft and install a new 1/4-20 x 2" shear bolt. Install 1/4-20 lock nut and tighten securely.

CAUTION: Do not substitute. Use only original equipment shear bolts as supplied with your snow thrower.

4.Insert safety ignition key and reconnect spark plug wire to spark plug.

IMPELLER SHEAR BOLTS

 

The impeller is secured to the impeller shaft with two (2)

 

capscrew/shear bolts and hex nuts. Should a foreign object

 

or ice become lodged in the impeller, the capscrews are

 

designed to break, preventing damage to any other com-

 

ponents. If impeller does not turn when auger control lever

 

is engaged, check to see if the capscrews have sheared.

16

To replace the capscrew/shear bolts:

4.Insert safety ignition key and reconnect spark plug wire to spark plug.

1/4-20

1/4-20 x 1-5/8

1/4-20 x 2

LOCKNUT

CAPSCREW /

SHOULDER /

 

SHEAR BOLT

SHEAR BOLT

 

IMPELLER HUB

 

 

IMPELLER

 

 

SHAFT

 

 

 

AUGER

 

 

HUB

1/4-20

 

 

LOCKNUT

AUGER HUB

AUGER SHAFT

FIG. 21

TO REMOVE BELT COVER (See Fig. 22)

1.Remove the two (2) screws securing belt cover to frame.

2.Remove belt cover.

3.Replace belt cover by installing cover and screws and tighten securely.

BELT

COVER

FRAME

SCREWS

FIG. 22

Page 16
Image 16
Poulan 435548, 96198002901 Service and Adjustments, To Adjust Snow Thrower Height, Chute Deflector, Shear Bolts See Fig

96198002901, 435548 specifications

The Poulan 96198002901, 435548 is a cutting-edge lawn mower designed for homeowners who seek a balance between performance and ease of use. Offering a powerful engine and a range of innovative features, this model is ideal for maintaining a well-manicured lawn with minimal effort.

One of the standout features of the Poulan mower is its robust 4-cycle engine that delivers exceptional power and efficiency. This engine is designed to provide a smooth operation while generating enough torque to tackle thick grass and uneven terrain. Coupled with an easy pull-start mechanism, users can quickly get their mower ready for action without the frustration often associated with recoil starters.

The mower's cutting deck is another highlight, with a size that optimally balances maneuverability and coverage. It allows for efficient cutting while reducing the time spent on mowing. Additionally, the adjustable cutting height provides users with flexibility, allowing them to choose the desired grass length. This is particularly useful for those who vary their lawn care practices throughout the growing season.

Maneuverability is further enhanced by the lightweight design of the Poulan 96198002901, 435548. Portability does not come at the cost of durability, as the mower is crafted from high-quality materials that ensure longevity. Furthermore, its compact size makes it easy to store, even in tight spaces.

The mower comes equipped with advanced technologies that improve its overall user experience. One notable feature is the automatic throttle control, which adjusts the engine speed based on the mower's workload. This not only extends the mower’s life but also enhances fuel efficiency, making it a cost-effective option for long-term lawn care.

Safety features are paramount, and the Poulan model includes a safety guard that automatically shuts off the blades when the user releases the handle. This is a crucial aspect for preventing accidents, particularly in households with children or pets.

In summary, the Poulan 96198002901, 435548 stands out as a reliable lawn mower that combines power, efficiency, and user-friendly features. With its sturdy construction, advanced technologies, and adjustable settings, it is designed to meet the diverse needs of homeowners looking to maintain their lawns effortlessly. Whether you have a small yard or a larger space, this mower promises to deliver excellent results while ensuring a safe and enjoyable mowing experience.