OPERATION

TO START ENGINE

•Be sure fuel shut-off valve is in the “OPEN” position.

Your snow thrower engine is equipped with both a 120 Volt A.C. electric starter and a recoil starter. The electric starter is equipped with a three-wire power cord and plug and is designed to operate on 120 Volt A.C. household current.

•Be sure your house is a 120 Volt A.C. three-wire grounded system. If you are uncertain, consult a licensed electrician.

WARNING: Do not use the electric starter if your house is not a 120 Volt A.C. three-wire grounded system. Seri- ous personal injury or damage to your snow thrower could result.

COLD START - ELECTRIC STARTER

1.Insert safety ignition key (tied to recoil start cord) into ignition slot until it clicks. DO NOT turn the key. Keep the extra safety ignition key in a safe place.

2.Place ON / OFF switch in “ON” position.

3.Move choke control to “FULL” position.

4.Connect the power cord to the engine.

5.Plug the other end of the power cord into a three-hole grounded 120 Volt A.C. receptacle.

NOTE: Do not use primer when starting engine with the electric starter.

6. Push starter button until engine starts.

IMPORTANT: Do not crank engine more than five continu- ous seconds between each time you try to start. Wait 5 to 10 seconds between each attempt.

7.When the engine starts, release the starter button and slowly move the choke control to the “OFF” position.

8.Disconnect the power cord from the receptacle first, then from the engine.

Allow the engine to warm up for a few minutes. Engine will not develop full power until it has reached normal operat- ing temperature.

WARM START - ELECTRIC STARTER

Follow the steps above, keeping the choke control in the “OFF” position.

COLD START - RECOIL STARTER

1.Insert safety ignition key (tied to recoil start cord) into ignition slot until it clicks. DO NOT turn the key. Keep the extra safety ignition key in a safe place.

2.Place ON / OFF switch in “ON” position.

3.Rotate choke control to “FULL” position.

4.Push the primer four (4) times if the temperature is below 15°F, or two (2) times if temperature is between 15° and 50°F. If temperature is above 50°F, priming is not necessary.

NOTE: Over priming may cause flooding, preventing the engine from starting. If you do flood the engine, wait a few minutes before attempting to start and DO NOT push the primer.

5.Pull recoil starter handle quickly. Do not allow starter rope to snap back.

6.When the engine starts, release the recoil starter handle and slowly move the choke control to the “OFF” posi- tion.

Allow the engine to warm up for a few minutes. Engine will not develop full power until it has reached normal operat- ing temperature.

WARM START - RECOIL STARTER

Follow the steps above, keeping the choke in the “OFF” position. DO NOT push the primer.

BEFORE STOPPING

Run the engine for a few minutes to help dry off any mois- ture on the engine.

IF RECOIL STARTER HAS FROZEN

If the recoil starter has frozen and will not turn the engine, proceed as follows:

1.Grasp the recoil starter handle and slowly pull as much rope out of the starter as possible.

2.Release the recoil starter handle and let it snap back against the starter.

If the engine still fails to start, repeat the above steps or use the electric starter.

SNOW THROWING TIPS

•Go slower in deep, freezing or heavy wet snow. Use the drive speed control, NOT the ON / OFF switch, to adjust speed.

•It is easier and more efficient to remove snow imme- diately after it falls.

•The best time to remove snow is the early morning. At this time the snow is usually dry and has not been ex- posed to the direct sun and warming temperatures.

•Slightly overlap each successive path to ensure all snow will be removed.

•Throw snow downwind whenever possible.

•Adjust the skid plates to proper height for current snow conditions. See “TO ADJUST SKID PLATES” in this section of this manual.

•For extremely heavy snow, reduce the width of snow removal by overlapping previous path and moving slowly.

•Keep engine clean and clear of snow during use. This will help air flow and extend engine life.

•After snow-throwing is completed, allow engine to run for a few minutes to melt snow and ice off the engine.

•Clean the entire snow thrower thoroughly after each use and wipe dry so it is ready for next use.

WARNING: Do not operate snow thrower if weather conditions impair vis- ibility. Throwing snow during a heavy, windy snowstorm can blind you and be hazardous to the safe operation of the snow thrower.

13

Page 12 Page 14
Page 13
Image 13
Poulan 96198002702, 435999 owner manual Snow Throwing Tips, To Start Engine, Before Stopping, If Recoil Starter has Frozen
Page 12 Page 14

435999, 96198002702 specifications

The Poulan 96198002702,435999 is a high-performance chainsaw designed for both professional use and demanding residential applications. This powerful tool is engineered to deliver exceptional efficiency and reliability, making it a preferable choice for users seeking durability and cutting precision.

One of its main features is the robust engine. The Poulan chainsaw is equipped with a potent two-cycle engine that provides ample power for cutting through thick limbs and logs. The engine's design ensures quick start-up capabilities, which is crucial for maintaining productivity on the job site or during weekend projects.

The chainsaw incorporates a powerful 18-inch bar and chain, optimized for both speed and cutting efficiency. This length allows for a greater cutting capacity, making it suitable for a variety of tasks, from pruning small branches to felling larger trees. The chain itself is designed for optimal cutting performance, reducing kickback and ensuring smooth, clean cuts.

Another noteworthy characteristic is the chainsaw's lightweight construction. Weighing significantly less than many competitors in its class, the Poulan 96198002702,435999 is designed for easy handling. This feature reduces user fatigue during extended use, allowing for longer work periods without discomfort.

The chainsaw also boasts user-friendly technology. The automatic oiler ensures that the bar and chain remain lubricated during operation, thereby extending the life of the chain and providing consistent performance. The tool-free chain tensioning system allows users to quickly and easily adjust the chain to maintain optimal tension without the need for additional tools, ensuring safety and efficiency.

Additionally, the design of the Poulan chainsaw includes anti-vibration technology, which plays a crucial role in reducing user fatigue and increasing comfort. This feature lowers the amount of vibration transmitted to the user’s hands, enabling them to work longer without discomfort.

Safety is also a priority in the design of the Poulan 96198002702,435999. The chainsaw is equipped with features such as a chain brake to prevent accidental cuts and enhance user safety. Furthermore, the ergonomic handle provides a secure grip, allowing users to maintain control even in challenging conditions.

In summary, the Poulan 96198002702,435999 combines power, efficiency, and user-focused features to create a reliable chainsaw suitable for a broad range of applications. Whether for professional forestry work or home landscaping tasks, this chainsaw is designed to meet the demands of any cutting job while ensuring user safety and comfort.
Top Page Image Contents