SERVICE AND ADJUSTMENTS

WARNING:Toavoidseriousinjury,before performing any service or adjustments:

1. Be sure the on/off switch is in the OFF position.

2.Remove safety ignition key.

3.Make sure the augers and all moving parts have completely stopped.

4.Disconnect spark plug wire from spark plug and place wire where it cannot come in contact with plug.

SNOW THROWER

TO ADJUST SNOW THROWER HEIGHT

See “TO ADJUST SKID PLATES” and “SCRAPER BAR” in the Operation section of this manual.

CHUTE DEFLECTOR

Thechutedeflector,attachedtothetopofthedischargechute, is provided to direct discharging snow away from the opera- tor. If the deflector becomes damaged, it should be replaced.

WARNING: To avoid serious injury, never operate your snow thrower with the deflector removed or damaged.

To change direction and/or distance snow is discharged, see “TO CONTROL SNOW DISCHARGE” in the Op- eration section of this manual.

SHEAR BOLTS (See Fig. 19)

AUGER SHEAR BOLTS

Both right and left-hand augers are secured to the auger shaft with a spacer, shear bolt and hex nut. Should a foreign object or ice become lodged in the augers, the shear bolts are designed to break, preventing damage to any other components. If one or both augers do not turn when auger control lever is engaged, check to see if one or both of the bolts have sheared. To replace the shear bolts:

1.Disengage all controls and move throttle control to STOP position. Wait for all moving parts to stop.

2.Remove safety ignition key and disconnect spark plug wire from spark plug. Place wire where it cannot come in contact with spark plug.

3.Align hole in auger hub with hole in auger shaft and install a new 1/4-20 x 2" shear bolt. Install 1/4-20 lock nut and tighten securely.

CAUTION: Do not substitute. Use only original equipment shear bolts as supplied with your snow thrower.

4.Insert safety ignition key and reconnect spark plug wire to spark plug.

IMPELLER SHEAR BOLTS

The impeller is secured to the impeller shaft with two (2) capscrew/shear bolts and hex nuts. Should a foreign object or ice become lodged in the impeller, the capscrews are designed to break, preventing damage to any other com- ponents. If impeller does not turn when auger control lever is engaged, check to see if the capscrews have sheared.

To replace the capscrew/shear bolts:

1.Disengage all controls and move throttle control to STOP position. Wait for all moving parts to stop.

2.Remove safety ignition key and disconnect spark plug wire from spark plug. Place wire where it cannot come in contact with spark plug.

3.Align holes in impeller hub with holes in impeller shaft and install two (2) new 1/4-20 x 1-5/8" capscrew/shear bolts. Install 1/4-20 locknuts and tighten securely.

CAUTION: Do not substitute. Use only original equipment capscrew/shear bolts as supplied with your snow thrower.

4.Insert safety ignition key and reconnect spark plug wire to spark plug.

1/4-20

1/4-20 x 1-5/8

1/4-20 x 2

LOCKNUT

CAPSCREW /

SHOULDER /

 

SHEAR BOLT

SHEAR BOLT

 

IMPELLER HUB

 

 

IMPELLER

 

 

SHAFT

 

 

 

AUGER

 

 

HUB

1/4-20

 

 

LOCKNUT

AUGER HUB

AUGER SHAFT

Fig. 19

TO REMOVE BELT COVER (See Fig. 20)

1.Remove the two (2) screws securing belt cover to frame.

2.Remove belt cover.

3.Replace belt cover by installing cover and screws and tighten securely.

BELT

COVER

FRAME

SCREWS

Fig. 20

16

Page 16
Image 16
Poulan 435999, 96198002702 Service and Adjustments, To Adjust Snow Thrower Height, Chute Deflector, Shear Bolts See Fig

435999, 96198002702 specifications

The Poulan 96198002702,435999 is a high-performance chainsaw designed for both professional use and demanding residential applications. This powerful tool is engineered to deliver exceptional efficiency and reliability, making it a preferable choice for users seeking durability and cutting precision.

One of its main features is the robust engine. The Poulan chainsaw is equipped with a potent two-cycle engine that provides ample power for cutting through thick limbs and logs. The engine's design ensures quick start-up capabilities, which is crucial for maintaining productivity on the job site or during weekend projects.

The chainsaw incorporates a powerful 18-inch bar and chain, optimized for both speed and cutting efficiency. This length allows for a greater cutting capacity, making it suitable for a variety of tasks, from pruning small branches to felling larger trees. The chain itself is designed for optimal cutting performance, reducing kickback and ensuring smooth, clean cuts.

Another noteworthy characteristic is the chainsaw's lightweight construction. Weighing significantly less than many competitors in its class, the Poulan 96198002702,435999 is designed for easy handling. This feature reduces user fatigue during extended use, allowing for longer work periods without discomfort.

The chainsaw also boasts user-friendly technology. The automatic oiler ensures that the bar and chain remain lubricated during operation, thereby extending the life of the chain and providing consistent performance. The tool-free chain tensioning system allows users to quickly and easily adjust the chain to maintain optimal tension without the need for additional tools, ensuring safety and efficiency.

Additionally, the design of the Poulan chainsaw includes anti-vibration technology, which plays a crucial role in reducing user fatigue and increasing comfort. This feature lowers the amount of vibration transmitted to the user’s hands, enabling them to work longer without discomfort.

Safety is also a priority in the design of the Poulan 96198002702,435999. The chainsaw is equipped with features such as a chain brake to prevent accidental cuts and enhance user safety. Furthermore, the ergonomic handle provides a secure grip, allowing users to maintain control even in challenging conditions.

In summary, the Poulan 96198002702,435999 combines power, efficiency, and user-focused features to create a reliable chainsaw suitable for a broad range of applications. Whether for professional forestry work or home landscaping tasks, this chainsaw is designed to meet the demands of any cutting job while ensuring user safety and comfort.