SERVICE AND ADJUSTMENTS

WARNING: To avoid serious injury, before performing any service or adjustments:

1.Be sure the on/off switch is in the OFF position.

2.Remove safety ignition key.

3.Make sure the augers and all moving parts have completely stopped.

4.Disconnect spark plug wire from spark plug and place wire where it cannot come in contact with plug.

SNOW THROWER

TO ADJUST SNOW THROWER HEIGHT

See “TO ADJUST SKID PLATES” and “SCRAPER BAR” in the Operation section of this manual.

CHUTE DEFLECTOR

The chute deflector, attached to the top of the discharge chute, is provided to direct discharging snow away from the operator. If the deflector becomes damaged, it should be replaced.

WARNING: To avoid serious injury, never operate your snow thrower with the deflector removed or damaged.

To change direction and/or distance snow is discharged, see “TO CONTROL SNOW DISCHARGE” in the Op- eration section of this manual.

SHEAR BOLTS (See Fig. 21)

AUGER SHEAR BOLTS

Both right and left-hand augers are secured to the auger shaft with a shear bolt and hex nut. Should a foreign ob- ject or ice become lodged in the augers, the shear bolts are designed to break, preventing damage to any other components. If one or both augers do not turn when auger control lever is engaged, check to see if one or both of the bolts have sheared. To replace the shear bolts:

1.Disengage all controls and move throttle control to STOP position. Wait for all moving parts to stop.

2.Remove safety ignition key and disconnect spark plug wire from spark plug. Place wire where it cannot come in contact with spark plug.

3.Align hole in auger hub with hole in auger shaft and install a new 1/4-20 x 2" shear bolt. Install 1/4-20 lock nut and tighten securely.

CAUTION: Do not substitute. Use only original equipment shear bolts as supplied with your snow thrower.

4.Insert safety ignition key and reconnect spark plug wire to spark plug.

IMPELLER SHEAR BOLTS

The impeller is secured to the impeller shaft with two (2) capscrew/shear bolts and hex nuts. Should a foreign object or ice become lodged in the impeller, the capscrews are designed to break, preventing damage to any other com- ponents. If impeller does not turn when auger control lever is engaged, check to see if the capscrews have sheared.

To replace the capscrew/shear bolts:

16

1.Disengage all controls and move throttle control to STOP position. Wait for all moving parts to stop.

2.Remove safety ignition key and disconnect spark plug wire from spark plug. Place wire where it cannot come in contact with spark plug.

3.Align holes in impeller hub with holes in impeller shaft and install two (2) new 1/4-20 x 1-5/8" capscrew/shear bolts. Install 1/4-20 locknuts and tighten securely.

CAUTION: Do not substitute. Use only original equipment capscrew/shear bolts as supplied with your snow thrower.

4.Insert safety ignition key and reconnect spark plug wire to spark plug.

1/4-20

1/4-20 x 1-5/8

1/4-20 x 2

LOCKNUT

CAPSCREW /

SHOULDER /

 

SHEAR BOLT

SHEAR BOLT

 

IMPELLER HUB

 

 

IMPELLER

 

 

SHAFT

 

 

 

AUGER

 

 

HUB

1/4-20

 

 

LOCKNUT

AUGER HUB

AUGER SHAFT

FIG. 19

TO REMOVE BELT COVER (See Fig. 20)

1.Remove the two (2) screws securing belt cover to frame.

2.Remove belt cover.

3.Replace belt cover by installing cover and screws and tighten securely.

BELT

COVER

FRAME

SCREWS

FIG. 20

Page 16
Image 16
Poulan 436842, 96198003302 Service and Adjustments, To Adjust Snow Thrower Height, Chute Deflector, Shear Bolts See Fig

96198003302, 436842 specifications

The Poulan 436842,96198003302 is a powerful and reliable lawn mower designed to meet the needs of homeowners and landscaping professionals alike. Known for its robust construction and advanced features, this mower offers a blend of performance, efficiency, and ease of use.

One of the main features of the Poulan 436842 is its high-performance engine, which provides ample power for tackling tough grass and uneven terrain. With a dependable horsepower rating, this mower ensures a consistent cut while minimizing the effort required from the user. The engine is designed with advanced technology that enhances fuel efficiency, allowing users to cover larger areas without frequent refueling.

The cutting system is another highlight of the Poulan 436842, equipped with a high-quality blade that delivers a clean and precise lawn cut. The mower typically offers adjustable cutting height options, enabling users to customize their mowing experience according to the specific needs of their lawn. This versatility ensures the mower can handle various grass types and lengths effectively.

The Poulan 436842 is also designed for user comfort and convenience. It features an ergonomic handle that reduces fatigue during extended use. Coupled with easy-to-maneuver wheels, this mower allows for smooth navigation around obstacles and tight corners. Additionally, the lightweight design further enhances maneuverability and overall user experience.

Maintenance is made simple with this mower as well. The Poulan 436842 comes equipped with easily accessible parts that simplify routine maintenance tasks such as oil changes and blade sharpening. This commitment to convenience not only extends the life of the mower but also ensures optimal performance with minimal effort from the user.

Moreover, safety features are integrated into the design of the Poulan 436842, protecting users during operation. These features include blade brakes and safety switches that prevent accidental starts, making the mower not only efficient but also safe to handle.

In conclusion, the Poulan 436842,96198003302 stands out in the market for its powerful performance, innovative features, and user-friendly design. Whether maintaining a residential lawn or managing larger landscapes, this mower is a solid choice that balances efficiency and ease of use, ensuring a well-maintained lawn with minimal hassle.