ON/OFF Switch

HOW TO START YOUR UNIT

WARNING: Avoid any contact with the muffler. A hot muffler can cause serious burns.

HELPFUL TIP

If your engine still does not start after following these instructions, please call 1-800-554-6723.

STARTING A COLD ENGINE (or a warm engine after running out of fuel)

Starting Position

Starter Handle

Choke

Lever

Primer Bulb

Muffler

1.Set unit on a flat surface.

2.Move ON/OFF switch to the ON position.

3.Slowly press the primer bulb 6 times.

4.Move choke lever to FULL CHOKE by aligning lever with position shown on de- cal (see illustration below).

Choke position decal

5.Squeeze the throttle trigger fully and hold through all remaining steps.

6.Pull starter rope handle sharply until en- gine sounds as if it is trying to start, but do not pull rope more than 6 times.

7.As soon as engine sounds as if it is trying to start, move choke lever to HALF CHOKE by aligning lever with position shown on decal (see illustration below).

Choke position decal

8.Pull starter rope sharply until engine runs, but no more than 6 pulls. If the engine doesn’t start after 6 pulls (at the HALF CHOKE position), move the choke lever to the FULL CHOKE position and press the primer bulb 6 times. Squeeze and hold the throttle trigger and pull the starter rope 2 more times. Move the choke lever to the HALF CHOKE position and pull the starter rope until the engine runs, but no more than 6 pulls. If the engine doesn’t start, repeat procedure 2 additional times.

NOTE: If engine still doesn’t start, it is probably flooded. Proceed to STARTING A FLOODED ENGINE.

9.Once the engine starts, allow it to run 10 se- conds, then move the choke lever to OFF CHOKE by aligning lever with position shown on decal (see illustration below). Al- low the unit to run for 30 more seconds at OFF CHOKE before releasing the throttle trigger. NOTE: If engine dies with the choke lever in the OFF CHOKE position, move the choke lever to the HALF CHOKE position and pull the rope until engine runs, but no more than 6 pulls.

Choke position decal

STARTING A WARM ENGINE

1.Move ON/OFF switch to the ON position.

2.Move the choke lever to the HALF CHOKE position.

3.Squeeze and hold the throttle trigger. Keep throttle trigger fully squeezed until the engine runs smoothly.

4.Pull starter rope sharply until engine runs, but no more than 5 pulls.

5.Allow engine to run 15 seconds, then move the choke lever to the OFF CHOKE position.

NOTE: If engine has not started, pull starter rope 5 more pulls. If engine still does not run, it is probably flooded.

STARTING A FLOODED ENGINE

Flooded engines can be started by placing the choke lever in the OFF CHOKE position; then, pull the rope to clear the engine of ex- cess fuel. This could require pulling the starter handle many times depending on how badly the unit is flooded.

9

Page 8 Page 10
Page 9
Image 9
Poulan 545123423 instruction manual HOW to Start Your Unit, Starting a Warm Engine, Starting a Flooded Engine
Page 8 Page 10

545123423 specifications

The Poulan 545123423 is a robust chainsaw that stands out in the market for its impressive features, advanced technologies, and numerous characteristics tailored to meet the needs of both professionals and hobbyists.

At the heart of the Poulan 545123423 is its powerful 50cc engine that delivers superior performance for cutting and trimming tasks. The engine provides an optimal balance of power and efficiency, allowing users to tackle a wide range of applications, from light pruning to heavy-duty cutting. The chainsaw is designed to provide reliable power, making it an ideal choice for tackling challenging jobs around the yard or on the job site.

One of the notable features of the Poulan 545123423 is its easy-starting system. Equipped with a Prime and Pull starting mechanism, this chainsaw allows for hassle-free operation, minimizing the effort required to get the tool running. Users can appreciate this feature, especially when they need to start the saw multiple times throughout the day.

The design of the Poulan 545123423 also emphasizes user comfort and safety. It has an ergonomic handle that ensures a secure grip, reducing fatigue during extended use. The chainsaw is also equipped with a chain brake that provides an additional layer of safety by stopping the chain in the event of kickback. This feature is essential for maintaining control and ensuring a safe cutting experience.

In terms of technology, the Poulan 545123423 incorporates an adjustable automatic oiling system. This innovation ensures that the chain remains well-lubricated during operation, leading to improved cutting performance and extended chain life. Additionally, the chainsaw features a translucent fuel tank that allows users to easily monitor fuel levels, preventing unexpected run-outs during critical tasks.

The lightweight construction of the Poulan 545123423 makes it easy to maneuver, whether users are cutting firewood, felling trees, or performing yard maintenance. Its overall design emphasizes portability without compromising strength, which is a significant advantage for those who frequently transport their equipment.

Overall, the Poulan 545123423 chainsaw combines power, ease of use, and advanced safety features, making it a versatile tool for any cutting job. Whether you are a seasoned professional or a casual user, the Poulan 545123423 is equipped to handle your needs with efficiency and reliability.
Top Page Image Contents