S Always wear gloves when servicing or cleaning the tines. The tines become very sharp from use.
SDo not run unit at high speed unless culti- vating.
HEDGE TRIMMER SAFETY
DANGER: RISK OF CUT; KEEP HANDS AWAY FROM BLADE
Blades move |
| Allow blades to stop |
| ||
momentarily |
| before removing |
after the |
| them from the cut. |
trigger is |
|
|
released. |
|
|
|
|
|
WARNING: Inspect the area before starting the unit. Remove all debris and hard objects such as rocks, glass, wire, etc. that can ricochet, be thrown, or otherwise cause injury or damage during operation.
S Do not use a cutting blade that is bent, warped, cracked, broken or damaged in any other way. Have worn or damaged parts re- placed by your authorized service dealer.
S Always keep unit in front of your body. Keep all parts of your body away from the cutting blade.
SKeep the cutting blade and air vents clear of debris.
SNOW THROWER SAFETY
WARNING: Keep hands and feet away from the rotor when starting or running the engine. Never attempt to clear the rotor with the engine/motor running. Stop engine and disconnect spark plug before unclogging snow or debris from discharge chute or when adjusting vanes.
WARNING: Never lean over dis- charge chute. Rocks or debris could be thrown into the eyes and face and cause seri- ous injury or blindness.
WARNING: Inspect the area where the unit is to be used. Remove objects that could be thrown or damage the unit. Some objects may be hidden by fallen snow
SDirect material discharge away from glass enclosures, automobiles, etc.
SDo not run engine at high speed while not removing snow.
SBe attentive when using the snowthrower, and stay alert for holes in the terrain and other hidden hazards.
SMake sure the rotor will spin freely before attaching the snowthrower to the power-
head.
SIf the rotor will not rotate freely due to frozen ice, thaw the unit before thoroughly before
attempting to operate under power.
SKeep the rotor clear of debris.
SDo not throw snow near other people. The
snow thrower could propel small objects at high speed causing injury.
SAfter striking a foreign object, stop the en- gine, disconnect spark plug and inspect the snowthrower for damage and repair if nec-
essary before restarting unit.
SNever operate the snowthrower near glass enclosures, automobiles and trucks.
SNever attempt to use the snowthrower on a roof.
SNever operate the snowthrower near win- dow wells, dropoffs, etc.
SNever discharge snow onto public roads or
near moving traffic.
SClear snow from slopes by going up and down; never across. Use caution when changing directions. Never clear snow from steep slopes.
SLet snowthrower run for a few minutes after clearing snow so moving parts do not
freeze.
SLook behind and use care when backing up. Exercise caution to avoid slipping or fal-
ling, especially when operating in reverse.
SKnow how to stop quickly.
7
