Setting the Oscillation
The oscillation function works at both operating temperatures.
Press the SWING button once to activate. The heater will begin to oscillate from side to side.
Press the SWING button again to stop the heater from oscillating.
Setting the Auto-Off Timer
The timer function works at both operating temperatures, and switches the unit off after a preset number of hours.
Press the TIMER button to activate the timer settings. The 30 minute LED will illuminate.
Press the TIMER button to cycle through the 30 minute and one hour increments, up to 7.5 hours. The heater will then switch itself to standby mode after the selected number of hours has passed.
ThermoGuard Overheating Safety Device
Your heater is fitted with a safety device that switches off the heater in the event of overheating. Should this heater stop working, turn off the heater and inspect the air inlet and outlet for blockages. Wait for at least five minutes for the protection system to reset before attempting to restart the heater. If the heater fails to operate or the safety device switches off again, return the heater to your nearest service centre for examination or repair.
9
KCE640_IB_FA.indd 9 | 16/10/09 10:50 AM |