Shoulder Strap Assembly

WARNING: Proper shoulder strap adjustments must be made with the engine completely stopped before using unit.

1.Try on shoulder strap and adjust for fit and balance before starting the engine or beginning a cutting operation.

2.Insert your right arm and head through the shoulder strap and allow it to rest on your left shoulder. Make sure the danger sign is centered on your back and the hook is to the right side of your waist.

NOTE: A one-half twist is built in the shoul- der strap to allow the strap to rest flat on the shoulder.

3.Adjust the strap, allowing the hook to be about 3 -- 6 inches (8 -- 15 cm) below the waist.

4.Fasten the strap hook to the clamp lo- cated between the throttle handle and the assist handle and lift the tool to the oper- ating position.

NOTE: It may be necessary to relocate the shoulder strap clamp on the shaft for proper balancing of unit.

TO RELOCATE SHOULDER STRAP CLAMP:

1.Loosen and remove both clamp screws.

2.Place the upper shoulder strap clamp over the upper shaft.

3.Position the lower shoulder strap clamp under the upper shaft and align the upper and lower clamp screw holes.

Upper Shoulder

Strap Clamp

POWERHEAD

END

ADJUSTING THE ASSIST HANDLE

WARNING: When adjusting the as- sist handle, be sure it remains between the

coupler and the lower arrow (closest to coupler) on the safety label to ensure proper balancing of unit. When adjusting the assist handle or handlebar during use of optional at- tachments, it must be repositioned between

the throttle trigger and the upper arrow (closest to engine) on the safety label.

1.Loosen wing nut on handle.

2.Rotate the handle on the shaft to an up- right position; retighten wing nut.

ATTACHING SHIELD (FOR LINE TRIMMER ATTACHMENT)

WARNING: The shield must be prop- erly installed. The shield provides partial protec- tion from the risk of thrown objects to the opera- tor and others and is equipped with a line limiter blade which cuts excess line to the proper length. The line limiter blade (on underside of shield) is sharp and can cut you. For proper orientation of shield, see KNOW YOUR TRIM- MER illustration in OPERATION section.

1.Remove wing nut from shield.

2.Insert bracket into slot as shown.

3.Pivot shield until bolt passes through hole in bracket.

4.Securely tighten wing nut onto bolt.

Slot

Shield

Bracket

	Lower Shoulder	ATTACHMENT
	Lower Shoulder	END
	Strap Clamp	END
		Screws

4.Insert two screws into the screw holes.

5.Secure shoulder strap clamp by tighten- ing screws with a hex wrench.

Line Limiter Blade

Wing

Nut

PP446ET, 545177333 specifications

The Poulan 545177333 PP446ET is a cutting-edge chainsaw designed for both professional and home applications, offering efficiency and ease of use for a variety of cutting tasks. This model is particularly known for its robust design, powerful engine, and user-friendly features, making it a popular choice among landscapers, contractors, and DIY enthusiasts.

One of the standout features of the PP446ET is its powerful 46cc two-stroke engine. This engine provides ample power for tackling tough jobs, from trimming trees to cutting firewood. The engine is designed with fuel efficiency in mind, ensuring that users can complete their tasks without frequent refueling interruptions. Additionally, the engine is engineered for reduced emissions, aligning with modern environmental standards and making it a more eco-friendly option.

The Poulan PP446ET is equipped with a 18-inch bar, allowing for greater reach and enhanced cutting capacity. This length is ideal for a wide range of tasks, from light pruning to larger limb removal and even felling small trees. The chainsaw features a low-profile chain, which aids in smoother cutting and reduces kickback, making it safer for inexperienced users.

A key technological advancement in the PP446ET is its automatic oiling system. This system ensures consistent lubrication of the chain and bar, reducing wear and increasing the lifespan of the chainsaw. Moreover, the tool-free chain tensioning feature simplifies maintenance, allowing users to easily adjust the chain tension without the need for additional tools.

User comfort is also a priority in the design of the PP446ET. The chainsaw features an ergonomic handle, which provides a secure grip and reduces fatigue during prolonged usage. The anti-vibration technology incorporated into the design further enhances comfort, allowing users to work longer without discomfort.

Safety features are paramount in any chainsaw, and the PP446ET excels in this area. The chainsaw is equipped with a chain brake that stops the chain almost immediately in the event of a kickback, along with a safety throttle lock to prevent accidental starts.

Overall, the Poulan 545177333 PP446ET stands out as a reliable, powerful, and user-friendly chainsaw. Its combination of innovative technologies, user-centric design, and robust performance makes it an excellent choice for anyone looking to tackle their cutting tasks with efficiency and ease.

Poulan PP446ET, 545177333 Shoulder Strap Assembly, To Relocate Shoulder Strap Clamp

Models: PP446ET 545177333