Cutters | Depth Gauge |
Drive Links
6.Slide the chain between the housing and the sprocket. Place chain around the sprocket and fit the drive links into the guide bar groove and then around guide bar nose.
Sprocket
Bar
Right Housing 
7.Hold the guide bar against the saw frame and install the bar clamp plate. Be sure the tab on the bar clamp plate is toward the rear of bar.
Adjusting Pin Slot Tab
Bar
Clamp Bar Nuts
Plate
8.Secure the guide bar and bar clamp plate with the bar nuts; tighten finger tight only.
CAUTION: If saw chain is installed backwards, the saw will vibrate exces- sively and will not cut wood.
CHAIN ADJUSTMENT
See CHECK CHAIN TENSION in the MAIN-
TENANCE section.
CUSTOMER SERVICEABLE PARTS
WARNING: Use of any other ac- cessory or attachment might present a risk of injury to the operator.
REPLACEMENT PART | PART NO. |
|
|
Bar Mounting Nuts | 530015251 |
Oil Cap | 530029282 |
Guide Plate | 530029285 |
Safety Lock Button | 530025873 |
Bar Adjusting Screw | 530015514 |
Bar Adjusting Pin | 530023492 |
Spacer | 530015832 |
Spacer Screw | 530015835 |
File (5/32″ dia.) Twin Pak | 952055085 |
Xtra GUARD→ Chain | 952051209 |
Xtra GUARD→ Chain | 952051211 |
952044368 | |
952044370 | |
Bar & Chain Lubricant | 952030129 |
Bar & Chain Lubricant | 952030130 |
STORAGE
WARNING: Perform the following steps after each use:
SAllow the motor to cool before storing
or transporting.
SStore chain saw and extension cord in
a well ventilated area
S Store chain saw with all guards in place and position chain saw so that any sharp object cannot accidentally cause injury.
SStore chain saw unplugged, well out of the reach of children.
SEASONAL STORAGE
Prepare your unit for storage at the end of the season or if it will not be used for 30 days or more.
If your chain saw is to be stored for a period of time:
SClean it thoroughly before lengthy stor-
age.
SStore in a clean dry area.
SLightly oil external metal surfaces and
guide bar.
SOil the chain and wrap it in heavy pa-
per or cloth.
SUse bar sheath to cover bar.
14
