Poulan 952711610, 545212831 Operation, Know Your Brushcutter Attachment, Blade Shield

NOTE: A one-half twist is built in the shoulder strap to allow the strap to rest flat on the shoul- der.

6.Adjust the strap, allowing the hook to be about 6 inches below the waist.

7.Fasten the strap hook to the clamp and lift the tool to the operating position.

8.Try on shoulder strap and adjust for fit and balance before starting the engine or

beginning a cutting operation.

NOTE: It may be necessary to relocate the shoulder strap clamp on the shaft for proper balancing of unit.

SHOULDER STRAP

ADJUSTMENT

FOR BALANCE

6 inches		4 -- 12 inches
(15 cm)	30 inches	(10 -- 30 cm)
below	(76 cm)	above
waist	minimum	ground

30inches

(76 cm) minimum

OPERATION

KNOW YOUR BRUSHCUTTER ATTACHMENT

READ THIS INSTRUCTION MANUAL AND SAFETY RULES BEFORE OPERATING YOUR BRUSHCUTTER ATTACHMENT. Compare the illustrations with your unit to familiarize yourself with the location of various controls and adjustments. Save this manual for future reference.

ShaftHanger

Gearbox

Blade Shield

Blade

BLADE

The BLADE is designed for cutting grass, weeds, and brush up to 1/2 inch in diameter.

BLADE SHIELD

The BLADE SHIELD provides protection from the spinning blade.

6