REPLACE SPARK PLUG

Replace the spark plug each year to ensure the engine starts easier and runs better. Set spark plug gap at 0.025 inch (0.6 mm). Igni- tion timing is fixed and nonadjustable.

NOTE: This spark ignition system complies with the Canadian standard ICES--002.

1.Twist, then pull off spark plug boot.

2.Remove spark plug from cylinder and dis- card.

3.Replace with Champion RCJ-6Y spark plug and tighten securely with a 3/4 inch (19 mm) socket wrench.

4.Reinstall the spark plug boot.

SERVICE AND ADJUSTMENTS

LINE REPLACEMENT

1.Remove spool by firmly pulling on tap button.

2.Clean entire surface of hub and spool.

3.Replace with a pre-wound spool, or cut two lengths of 12-1/2 feet (3.8 meters) of 0.080 inch (2 mm) diameter Poulan/ WEED EATER brand line.

WARNING: Never use wire, rope, string, etc., which can break off and become a dangerous missile.

4.Insert ends of the lines about 1/2 inch (1 cm) into the small holes on the inside of spool.

Spool

Small

Holes

Line exit holes

Line in Notch

Hub

Line in Notch

 

5.Wind the line evenly and tightly onto the spool. Wind in the direction of the arrows found on the spool.

6.Push the lines into the notches, leaving 3 to 5 inches (7 -- 12 cm) unwound.

7.Insert the lines into the the exit holes in the hub as shown in the illustration.

8.Align the notches with the line exit holes.

9.Push spool into hub until it snaps into place.

10.Pull the lines extending outside of the hub to release the lines from the notches.

REPLACING THE TRIMMER HEAD

1.Hold the dust cup with a wrench to keep the shaft from turning while removing and installing trimmer head.

Dust Cup

2.Remove trimmer head by turning counter- clockwise (looking from bottom of unit).

3.Thread replacement trimmer head onto the shaft by turning clockwise. Only tighten hand tight!

CARBURETOR IDLE SPEED

ADJUSTMENT

WARNING: Keep others away when making idle speed adjustments. The trimmer head will be spinning during this procedure. Wear your protective equipment and observe all safety precautions.

The carburetor has been carefully set at the factory. Adjustments may be necessary if you notice any of the following conditions:

S Engine will not idle when the throttle is re- leased.

Make adjustments with the unit supported so the cutting attachment is off the ground and will not make contact with any object. Hold the unit by hand while running and making ad- justments. Keep all parts of your body away from the cutting attachment and muffler.

To adjust idle speed:

Allow engine to idle. Adjust speed until engine runs without stalling (idle speed too slow).

S Turn idle speed screw clockwise to in- crease engine speed if engine stalls or dies.

STurn idle speed screw counterclockwise to decrease engine speed.

Idle Speed Screw

Air Filter Cover

If you require further assistance or are unsure about performing this procedure, contact an authorized service dealer or call 1--800--554--6723.

10

Page 10
Image 10
Poulan 952711930 Service and Adjustments, Replace Spark Plug, Line Replacement, Replacing the Trimmer Head

952711930 specifications

The Poulan 952711930 is a highly regarded product in the domain of lawn care and maintenance, particularly recognized for its efficiency and durability. This innovative product is engineered to provide users with a dependable solution for a variety of outdoor tasks, making it a preferred choice among homeowners and landscape professionals alike.

One of the main features of the Poulan 952711930 is its powerful 2-cycle engine, which offers robust performance, ensuring that users can tackle a diverse range of tasks with ease. This engine is designed to deliver a strong output while maintaining a lightweight structure, allowing for flexibility and maneuverability during operation. Additionally, the engine runs on a fuel and oil mixture, which can be more efficient than traditional 4-cycle engines, making it a practical choice for those looking to optimize their fuel consumption.

The design of the Poulan 952711930 incorporates advanced technologies that enhance user experience and performance. Notably, it features an easy start system that minimizes the effort needed to start the engine, delivering a hassle-free experience even for beginners. This is complemented by a comfortable grip handle that reduces vibrations, thus allowing for extended use without causing fatigue.

Durability is another key characteristic of the Poulan 952711930. It is constructed with high-quality materials that can withstand the rigors of outdoor use, ensuring longevity and reliability over time. Users can expect this product to maintain its performance season after season, making it a worthy investment for lawn care enthusiasts.

Additionally, this model comes equipped with an adjustable cutting head, which provides versatility in trimming and edging tasks. This functionality is particularly beneficial for achieving precise cuts in hard-to-reach areas or along edges. The lightweight design further enhances the ease of use, allowing operators to navigate their yards effortlessly.

Overall, the Poulan 952711930 stands out with its combination of power, user-friendly features, and durable construction. Whether for routine maintenance or more challenging landscaping tasks, this product offers the tools necessary to achieve professional results while making outdoor work more enjoyable. With its blend of advanced technologies and practical design, the Poulan 952711930 is undoubtedly a valuable addition to any outdoor equipment collection.