moisture absorption into the fuel/oil mixture leading to oil and fuel separation.

HELPFUL TIP

If your engine switch reads “push to stop”, it is always in the ON position.

HOW TO STOP YOUR UNIT

STo stop the engine, push and hold the STOP switch in the STOP position until the engine stops.

SIf engine does not stop, move choke to the FULL CHOKE position.

HOW TO START YOUR UNIT

WARNING: The trimmer head will turn while starting the engine. Avoid any con- tact with the muffler. A hot muffler can cause serious burns.

HELPFUL TIP

If your engine still does not start after following these instructions, please call 1-800-554-6723.

STARTING A COLD ENGINE (or a warm engine after running out of fuel)

Starting Position

1.Set unit on a flat surface.

2.Slowly press the primer bulb 6 times.

3.Move choke lever to the FULL CHOKE position.

4.Squeeze the throttle trigger fully and hold through all remaining steps.

Primer Bulb

Choke

Lever

Starter Handle

5.Pull starter rope handle sharply until engine sounds as if it is trying to start, but do not pull rope more than 6 times.

6.As soon as engine sounds as if it is trying to start, move choke lever to HALF CHOKE position.

7.Pull starter rope sharply until engine runs, but no more than 6 pulls.

NOTE: If the engine doesn’t start after 6 pulls (at the HALF CHOKE position), move the choke lever to the FULL CHOKE position and press the primer bulb 6 times. Squeeze and hold the throttle trigger and pull the starter rope 2 more times. Move the choke lever to the HALF CHOKE position and pull the start- er rope until the engine runs, but no more than 6 pulls. If the engine still doesn’t start, it is probably flooded. Proceed to

STARTING A FLOODED ENGINE.

8.Once the engine starts, allow it to run 10 se- conds, then move the choke lever to the RUN position. Allow the unit to run for 30 more seconds at RUN before releasing the throttle trigger.

NOTE: If engine dies with the choke le- ver in the RUN position, move the choke lever to the HALF CHOKE position and pull the rope until engine runs, but no more than 6 pulls.

STARTING A WARM ENGINE

1.Move the choke lever to the HALF CHOKE position.

2.Squeeze and hold the throttle trigger. Keep throttle trigger fully squeezed until the en- gine runs smoothly.

3.Pull starter rope sharply until engine runs, but no more than 6 pulls.

4.Allow engine to run 15 seconds, then move the choke lever to RUN.

NOTE: If engine has not started, pull starter rope 5 more pulls. If engine still does not run, it is probably flooded.

STARTING A FLOODED ENGINE

Flooded engines can be started by placing the choke lever in the RUN position; then, pull the rope to clear the engine of excess fuel. This could require pulling the starter handle many times depending on how badly the unit is flooded. If the unit still doesn’t start, refer to TROUBLESHOOTING TABLE or call 1-800-554-6723.

7

Page 6 Page 8
Page 7
Image 7
Poulan 952711930 HOW to Stop Your Unit, HOW to Start Your Unit, Starting a Warm Engine, Starting a Flooded Engine
Page 6 Page 8

952711930 specifications

The Poulan 952711930 is a highly regarded product in the domain of lawn care and maintenance, particularly recognized for its efficiency and durability. This innovative product is engineered to provide users with a dependable solution for a variety of outdoor tasks, making it a preferred choice among homeowners and landscape professionals alike.

One of the main features of the Poulan 952711930 is its powerful 2-cycle engine, which offers robust performance, ensuring that users can tackle a diverse range of tasks with ease. This engine is designed to deliver a strong output while maintaining a lightweight structure, allowing for flexibility and maneuverability during operation. Additionally, the engine runs on a fuel and oil mixture, which can be more efficient than traditional 4-cycle engines, making it a practical choice for those looking to optimize their fuel consumption.

The design of the Poulan 952711930 incorporates advanced technologies that enhance user experience and performance. Notably, it features an easy start system that minimizes the effort needed to start the engine, delivering a hassle-free experience even for beginners. This is complemented by a comfortable grip handle that reduces vibrations, thus allowing for extended use without causing fatigue.

Durability is another key characteristic of the Poulan 952711930. It is constructed with high-quality materials that can withstand the rigors of outdoor use, ensuring longevity and reliability over time. Users can expect this product to maintain its performance season after season, making it a worthy investment for lawn care enthusiasts.

Additionally, this model comes equipped with an adjustable cutting head, which provides versatility in trimming and edging tasks. This functionality is particularly beneficial for achieving precise cuts in hard-to-reach areas or along edges. The lightweight design further enhances the ease of use, allowing operators to navigate their yards effortlessly.

Overall, the Poulan 952711930 stands out with its combination of power, user-friendly features, and durable construction. Whether for routine maintenance or more challenging landscaping tasks, this product offers the tools necessary to achieve professional results while making outdoor work more enjoyable. With its blend of advanced technologies and practical design, the Poulan 952711930 is undoubtedly a valuable addition to any outdoor equipment collection.
Top Page Image Contents