OPERATION

KNOW YOUR TRIMMER

READ THIS INSTRUCTION MANUAL AND SAFETY RULES BEFORE OPERATING YOUR UNIT. Compare the illustrations with your unit to familiarize yourself with the location of the various controls and adjustments. Save this manual for future reference.

 

 

Assist handle

 

Coupler

Trimmer

Shaft

 

 

ON/STOP switch

head

 

 

Shield

Primer bulb

 

Starter handle

Line limiter

 

Muffler

 

 

blade

Throttle

 

 

Start

 

trigger

lever

ON/STOP SWITCH

The ON/STOP switch is used to stop engine. To stop the engine, push and release the engine ON/STOP switch.

PRIMER BULB

The PRIMER BULB removes air from the car- buretor and fuel lines and fills them with fuel. This allows you to start the engine with fewer pulls on the starter rope. Activate the primer bulb by pressing it and allowing it to return to its original form.

START LEVER

The START LEVER helps to supply fuel to the engine to aid in starting. Activate the starting system by moving the start lever to the START position. DO NOT squeeze the throttle trigger until the engine has started and runs. After the engine starts, allow the engine to warm--up 10--15 seconds, then fully squeeze the throttle trigger to deactivate the starting system (start le- ver returns to RUN position).

COUPLER

The COUPLER enables optional attach- ments to be installed on the unit.

BEFORE STARTING ENGINE

WARNING: Be sure to read the fuel information in the safety rules before you begin. If you do not understand the safety rules, do not attempt to fuel your unit. Call 1-800-554-6723.

FUELING ENGINE

WARNING: Remove fuel cap slowly when refueling.

HELPFUL TIP

To obtain the correct oil mix ratio, pour 3.2 ounces of 2-cycle synthetic oil into one gallon of fresh gas.

This engine is certified to operate on unleaded gasoline. Before operation, gasoline must be mixed with a good quality synthetic 2-cycle air-cooled engine oil designed to be mixed at a ratio of 40:1. Poulan/WEED EATER brand synthetic oil is recommended. Mix gasoline and oil at a ratio of 40:1. A 40:1 ratio is obtained by mixing 3.2 fluid ounces (95 ml) of oil with 1 gallon

(4 liters) of unleaded gasoline. DO NOT USE automotive oil or marine oil. These oils will cause engine damage. When mixing fuel, follow instructions printed on container. Once oil is added to gasoline, shake container momentarily to assure that the fuel is thoroughly mixed. Always read and follow the safety rules relating to fuel before fueling your unit.

CAUTION: Never use straight gasoline in your unit. This will cause permanent engine damage and void the limited warranty.

FUEL REQUIREMENTS

This engine requires the use of minimum 87 octane [R+M]/2 clean gasoline.

IMPORTANT

Use of alcohol blended fuels (called gasohol or using ethanol or methanol) can cause major en- gine performance and durability problems.

WARNING: Alternative fuels (not gas- oline) such as E--15 (15% alcohol), E--20 (20% alcohol), E--85 (85% alcohol) are NOT classified as gasoline and are NOT approved for use in 2--stroke gasoline engines. Use of alternative fuels will cause problems such as: improper

10

Page 10
Image 10
Poulan 952711961 instruction manual Operation

952711961 specifications

The Poulan 952711961 is a versatile and robust engine that caters to a variety of outdoor power needs. It is widely recognized for its durability and efficiency, making it a popular choice among both amateur gardeners and professional landscapers. This engine is particularly known for its application in various outdoor tools, including lawn mowers, trimmers, and blowers.

One of the standout features of the Poulan 952711961 is its powerful performance. The engine is designed to deliver reliable horsepower, providing the necessary strength to tackle tough yard work and maintenance tasks effortlessly. Its high-performance design ensures that it can handle rigorous conditions, whether you are mowing dense grass or trimming hedges.

In addition to power, this engine is also engineered with advanced technologies that enhance its efficiency. The inclusion of a two-cycle engine design allows for a lighter weight and improved fuel efficiency. This means users can benefit from longer run times on less fuel, reducing the frequency of refueling breaks during operations. Moreover, Poulan has incorporated features to minimize emissions, ensuring that users can work more environmentally friendly while complying with modern regulations.

Durability is another critical aspect of the Poulan 952711961. The engine's construction includes high-quality materials that withstand the rigors of outdoor use. This durability translates into a lower likelihood of maintenance issues and a longer lifespan, making it a worthwhile investment for any outdoor enthusiast.

Ease of use is also a priority with the design of this engine. It often includes user-friendly features, such as an easy-start system and simple maintenance procedures, which allow operators of all skill levels to operate the engine without frustration. Whether you're a seasoned professional or a newcomer to lawn care, the Poulan 952711961 is built to accommodate your needs.

Furthermore, its compact size allows for easy transportation and storage, which is a significant advantage for those with limited space. Overall, the Poulan 952711961 stands out as a reliable, efficient, and user-friendly engine that effectively meets various outdoor power demands, making it a preferred choice in the market. With its combination of power, efficiency, and durability, it represents an excellent option for anyone looking to enhance their outdoor tasks with confidence.