Pioneer PD-M550 CD ,ayo, Poworoo,d, Connections, Beforeoperatingthe Player, Making connections

CONNECTIONS

•Make sure that all of the components are turned off before making connections.

FOutput c///ord

Red_ Whitef

CD ,ayo Poworoo,d/ Cassette deck

/

CD-DECK SYNCHRO cord

Making connections

[] Connect the OUTPUT jacks of this unit to the input jacks (CD or AUX) of the amplifier, Make sure that the white plugs are connected to the left (L) jacks and the red plugs to the right (R)

jacks.

•Be sure not to connect this unit to the amplifier's PHONO jacks, as sound will be distorted and normal playback will not be possible.

[] Connect the power cord to a household AC wall outlet or an AC outlet on your amplifier.

•Make sure plugs are inserted fully into the jacks and wall outlet.

CD-Dack synchro function

If you have a Pioneer cassette deck provided with the CD-Deck synchro function, connect the CD-DECK SYNCHRO jacks of the CD player and cassette deck, With this function, synchro recording can be carded out between player and deck.

•For details on connections and operation, refer to the instruction manual supplied with the cassette deck.

•The CD-DECK SYNCHRO cord is not supplied with the CD player.

System r Dmote control with a Pioneer stereo amplifier 1hat has the [] mark

(Available wit the PD-M450 and U.S. and Canadian models of the PD-M550/PD M455/PD-M453 only: Not available with models for military zone,' (multi-voltage types))

When • Pior ear stereo amplifier bearing the [] mark is used, connect the ;ONTROL IN jack on the rear panel of the CD player to the CONT _OL OUT jack of the amplifier. This witl enable the

CD player to be controlled using the remote control unit supplied with the ster, Jo amplifier, If you do not plan to use this feature, it

is not necess Jry to connect CONTROL IN/OUT jacks.

•The contr( ,I cord is supplied with the CD player.

•The ramp1 • control unit supplied with the amplifier can be used to control Slay, Stop, Pause, Track!Disc Search and Disc Change operation.'

•For instru ;tions regarding connections and operation, refer to the opera ling instruction manual provided with your stereo

amplifier.

NOTES:

•When a o _ntrol cord is connected to the player's CONTROL IN jack, dire€ ! control of the player with the remote control unit is not possfl ,le. Operate the player with the remote control unit by aiming ¢tat the amplifier.

•Be sure t( connect both of the control cord's plugs securely to the CONT _OL tN and CONTROL OUT terminals. Do not connect

only one nd of the cable.

•Be sure t_ turn off the power of the ampfifier when connecting the poweJ cord and output cord,

BEFOREOPERATINGTHE PLAYER

CARE OF DISCS

•With this player, use discs which display the mark shown below. (Optical audio digital discs.)

•When holding discs, do not touch their signal surfaces. Hold by the edges, or by one edge and the center hole,

DIGITAL AUDIO

6

<PRB1142>

En

•Do not affix gummed labels or tape to the label surfaces. Also, do not scratch or damage the label

•Discs rotate at high speed inside the player. Do not use damaged [cracked or warped) discs.