SERVICE AND ADJUSTMENTS

TO LEVEL MOWER HOUSING

Adjust the mower while tractor is parked on level ground or driveway. Make sure tires are properly inflated (See “PRODUCT SPECIFICATIONS” section of this manual). If tires are over or underinflated, you will not properly adjust your mower.

SIDE-TO-SIDE ADJUSTMENT (See Figs. 14 and 15)

Raise mower to its highest position.

At the midpoint of both sides of mower, measure height from bottom edge of mower to ground. Distance “A” on both sides of mower should be the same or within 1/4" of each other.

If adjustment is necessary, make adjustment on one side of mower only.

To raise one side of mower, tighten lift link adjustment nut on that side.

To lower one side of mower, loosen lift link adjustment nut on that side.

NOTE: Each full turn of adjustment nut will change mower height about 1/8".

Recheck measurements after adjusting.

BOTTOM EDGE

 

BOTTOM EDGE

OF MOWER TO

 

OF MOWER TO

GROUND

 

GROUND

A

GROUND LINE

A

FIG. 14

SUSPENSION ARM

LIFT LINK

ADJUSTMENT NUT

FIG. 15

FRONT-TO-BACK ADJUSTMENT (See Figs. 16 and 17)

IMPORTANT: DECK MUST BE LEVEL SIDE-TO-SIDE. IF THE FOLLOWING FRONT-TO-BACK ADJUSTMENT IS NECESSARY, BE SURE TO ADJUST BOTH FRONT LINKS EQUALLY SO MOWER WILL STAY LEVEL SIDE-TO-SIDE.

To obtain the best cutting results, the mower housing should be adjusted so that the front is approximately 1/8" to 1/2" lower than the rear when the mower is in its high- est position.

Check adjustment on right side of tractor. Measure distance “D” directly in front and behind the mandrel at bottom edge of mower housing as shown.

Before making any necessary adjustments, check that both front links are equal in length.

If links are not equal in length, adjust one link to same length as other link.

To lower front of mower loosen nut “E” on both front links an equal number of turns.

When distance “D” is 1/8" to 1/2" lower at front than rear, tighten nuts “F” against trunnion on both front links.

To raise front of mower, loosen nut “F” from trunnion on both front links. Tighten nut “E” on both front links an equal number of turns. The two front links must remain equal in length.

When distance “D” is 1/8" to 1/2" lower at front than rear, tighten nut “F” against trunnion on both front links.

Recheck side-to-side adjustment.

MANDREL

“D”

“D”

FIG. 16

BOTH FRONT LINKS MUST BE EQUAL IN LENGTH

NUT “F”

NUT “E”

TRUNNION

FRONT LINKS

FIG. 17

20

Page 20
Image 20
Poulan 96012009000, 424999 manual To Level Mower Housing, FRONT-TO-BACK Adjustment See Figs

424999, 96012009000 specifications

The Poulan 96012009000,424999 is a high-performance chainsaw designed to meet the needs of both professional landscapers and home users. This powerful tool is engineered for efficiency, durability, and ease of use, making it a reliable choice for various cutting tasks, including tree trimming, firewood cutting, and yard maintenance.

One of the standout features of the Poulan 96012009000,424999 is its robust engine. With a potent 42cc two-stroke engine, this chainsaw provides ample power to tackle even the toughest jobs. The engine is designed to produce maximum torque at lower RPMs, which helps to reduce wear while ensuring efficient cutting performance. Its lightweight construction further enhances maneuverability and allows for extended use without causing undue fatigue to the operator.

In addition to its powerful engine, the chainsaw incorporates advanced technologies that promote user comfort and convenience. The ergonomic design features an anti-vibration system that minimizes shock and reduces operator fatigue, allowing for a more enjoyable cutting experience. The wrap-around handle provides improved grip and control, essential for managing the saw during different cutting applications.

Another key characteristic of the Poulan 96012009000,424999 is its easy starting system. The chainsaw is equipped with a simple pull-start mechanism that requires minimal effort, allowing users to get to work quickly without frustration. Additionally, it features an adjustable oiling system, which allows users to control the flow of oil to the chain, ensuring proper lubrication and extending the life of the guide bar and chain.

The 16-inch cutting bar strikes a perfect balance between reach and control, making it versatile enough for a range of cutting tasks. The high-visibility chain saw chain ensures cutting precision, while the built-in chain brake enhances safety by preventing accidental kickback.

Maintenance is made easier with the Poulan 96012009000,424999, as it comes with tool-less chain tensioning, allowing users to quickly and easily adjust the chain tension without the need for additional tools. This feature not only saves time but also ensures optimal performance for every cutting task.

In summary, the Poulan 96012009000,424999 is a powerful, user-friendly chainsaw that combines innovative features and technologies. With its performance-oriented design, ergonomic handling, and features focused on safety and ease of maintenance, this chainsaw stands out as an excellent choice for anyone looking to tackle their cutting needs with confidence and efficiency.