SAFETY RULES

Safe Operation Practices for Ride-On Mowers

DANGER: THIS CUTTING MACHINE IS CAPABLE OF AMPUTATING HANDS AND FEET AND THROWING OBJECTS. FAILURE TO OBSERVE THE FOLLOWING SAFETY INSTRUCTIONS COULD RESULT IN SERIOUS INJURY OR DEATH.

WARNING: In order to prevent acci- dental starting when setting up, trans- porting, adjusting or making repairs, always disconnect spark plug wire and place wire where it cannot contact spark plug.

WARNING: Do not coast down a hill in neutral, you may lose control of the tractor.

WARNING: Tow only the attachments that are recommended by and comply with specifications of the manufacturer of your tractor. Use common sense when towing. Operate only at the low- est possible speed when on a slope. Too heavy of a load, while on a slope, is dangerous. Tires can lose traction with the ground and cause you to lose control of your tractor.

WARNING

Engine exhaust, some of its constituents, and cer- tain vehicle components contain or emit chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Do not operate machine without the entire grass catcher, discharge guard, or other safety devices in place and working.

Slow down before turning.

Never leave a running machine unattended. Always turn off blades, set parking brake, stop engine, and remove keys before dismounting.

Disengage blades when not mowing. Shut off engine and wait for all parts to come to a complete stop before cleaning the machine, removing the grass catcher, or unclogging the discharge guard.

Operate machine only in daylight or good artificial light.

Do not operate the machine while under the influence of alcohol or drugs.

Watch for traffic when operating near or crossing roadways.

Use extra care when loading or unloading the machine into a trailer or truck.

Always wear eye protection when operating ma- chine.

Data indicates that operators, age 60 years and above, are involved in a large percentage of riding mower-re- lated injuries. These operators should evaluate their ability to operate the riding mower safely enough to protect themselves and others from serious injury.

Follow the manufacturer's recommendation for wheel weights or counterweights.

Keep machine free of grass , leaves or other debris build-up which can touch hot exhaust / engine parts and burn. Do not allow the mower deck to plow leaves or other debris which can cause build-up to occur. Clean any oil or fuel spillage before operating or storing the machine. Allow machine to cool before storage.

WARNING

Battery posts, terminals and related accessories contain lead and lead compounds, chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.

I. GENERAL OPERATION

Read, understand, and follow all instructions on the machine and in the manual before starting.

Do not put hands or feet near rotating parts or under the machine. Keep clear of the discharge opening at all times.

Only allow responsible adults, who are familiar with the instructions, to operate the machine.

Clear the area of objects such as rocks, toys, wire, etc., which could be picked up and thrown by the blades.

Be sure the area is clear of bystanders before operat- ing. Stop machine if anyone enters the area.

Never carry passengers.

Do not mow in reverse unless absolutely necessary. Always look down and behind before and while back- ing.

Never direct discharged material toward anyone. Avoid discharging material against a wall or obstruction. Material may ricochet back toward the operator. Stop the blades when crossing gravel surfaces.

2

II. SLOPE OPERATION

Slopes are a major factor related to loss of control and tip-over accidents, which can result in severe injury or death. Operation on all slopes requires extra caution. If you cannot back up the slope or if you feel uneasy on it, do not mow it.

• Mow up and down slopes, not across.

• Watch for holes, ruts, bumps, rocks, or other hidden objects. Uneven terrain could overturn the machine. Tall grass can hide obstacles.

• Choose a low ground speed so that you will not have to stop or shift while on the slope.

• Do not mow on wet grass. Tires may lose traction. Always keep the machine in gear when going down slopes. Do not shift to neutral and coast downhill.

• Avoid starting, stopping, or turning on a slope. If the tires lose traction, disengage the blades and proceed slowly straight down the slope.

• Keep all movement on the slopes slow and gradual. Do not make sudden changes in speed or direction, which could cause the machine to roll over.

• Use extra care while operating machine with grass catchers or other attachments; they can affect the stability of the machine. Do no use on steep slopes.

• Do not try to stabilize the machine by putting your foot on the ground.

• Do not mow near drop-offs, ditches, or embankments. The machine could suddenly roll over if a wheel is over the edge or if the edge caves in.

Page 2
Image 2
Poulan 96042003402 Safety Rules, Safe Operation Practices for Ride-On Mowers, General Operation, II. Slope Operation

419055, 96042003402 specifications

The Poulan 96042003402 and 419055 are iconic chainsaw models that cater to both professional and amateur woodworkers. These powerful tools are engineered with innovative technologies and features that set them apart in the competitive landscaping and forestry market.

One of the standout characteristics of the Poulan 96042003402 is its robust engine, typically featuring a 40cc displacement. This engine provides powerful performance, enabling users to tackle a variety of cutting tasks efficiently. The engine is designed with advanced air injection systems that reduce air filter contamination, enhancing engine longevity and requiring less frequent maintenance. This feature not only translates to consistent performance but also makes the tool easier to operate over extended periods.

The 419055 model complements this with an enhanced ergonomic design. It includes padded handles that reduce vibration and improve comfort during prolonged use. This thoughtful design ensures that users can maintain control and reduce fatigue, which is particularly beneficial for those working on large projects or in challenging conditions.

Both models boast a quick-adjust chain tensioning system, simplifying the process of tightening the chain for optimal performance. This feature saves time and enhances safety, as proper chain tension is critical to effective cutting. Furthermore, these chainsaws are equipped with automatic oiler systems that ensure consistent lubrication, which not only enhances cutting efficiency but also extends chain life.

Poulan models are also known for their lightweight construction, improving maneuverability and ease of use. Weighing in under 15 pounds, these chainsaws are suitable for various users, from seasoned professionals to weekend warriors. Despite their lightweight design, they do not compromise power or performance, making them a versatile option for diverse tasks ranging from trimming branches to felling small trees.

Moreover, Poulan places a strong emphasis on user-friendly operation. These chainsaws are equipped with simple starting systems that minimize the effort needed to get the engine running, ensuring that users can quickly get to work. Safety features, including chain brakes and throttle locks, further enhance their usability, providing peace of mind during operation.

In conclusion, the Poulan 96042003402 and 419055 chainsaws are excellent choices for anyone looking for reliable, powerful, and user-friendly tools. With their combination of advanced technology, ergonomic design, and enhanced safety features, they stand out as trusted tools for a range of cutting tasks, meeting the needs of woodworkers and landscapers alike.