SERVICE AND ADJUSTMENTS

TO REPLACE MOWER BLADE DRIVE BELT (See Fig. 29)

The mower blade drive belt may be replaced without tools. Park the tractor on level surface. Engage parking brake.

BELT REMOVAL -

Remove mower from tractor (See “TO REMOVE MOWER” in this section of manual).

Work belt off both mandrel pulleys and idler pulleys.

Pull belt away from mower.

BELT INSTALLATION -

Work belt around both mandrel pulleys and idler pul- leys.

Make sure belt is in all pulley grooves and inside all belt guides.

Install mower (See "To Install Mower" in this section of manual).

IDLER

PULLEYS

MANDREL

PULLEY

MANDREL

PULLEY

Fig. 29

TO CHECK BRAKE

If tractor requires more than five (5) feet to stop at highest speed in highest gear on a level, dry concrete or paved surface, then brake must be serviced.

You may also check brake by:

Park tractor on a level, dry concrete or paved surface, depress brake pedal all the way down and engage parking brake.

Place gear shift lever in neutral (N) position.

The rear wheels must lock and skid when you try to manu- ally push the tractor forward. If the rear wheels rotate, then the brake needs to be serviced. Contact a qualified service center.

TO REPLACE MOTION BELT DRIVE (See Fig. 30)

Park the tractor on level surface. Engage parking brake. For assistance, there is a belt installation guide decal on bottom side of left footrest.

BELT REMOVAL -

Remove mower (See “TO REMOVE MOWER” in this section of manual).

NOTE: Observe entire motion drive belt and position of all belt guides and keepers.

Remove belt from stationary idler (A) and clutching idler (B).

Pull belt slack toward rear of tractor. Carefully remove belt upwards from transmission input pulley and over cooling fan blades (D).

Remove belt downward from engine pulley (E).

Slide belt toward rear of tractor, off the steering plate

(F) and remove from tractor.

BELT INSTALLATION -

Install new belt from tractor rear to front, over the steer- ing plate (F) and above clutch brake pedal shaft (G).

Pull belt toward front of tractor and roll belt onto engine pulley (E).

Pull belt toward rear of tractor. Carefully work belt down around transmission cooling fan and onto the input pulley (D). Be sure belt is inside the belt keeper.

Install belt through stationary idler (A) and clutching idler (B).

Make sure belt is in all pulley grooves and inside all belt guides and keepers.

Install mower (See “TO INSTALL MOWER” in this section of manual).

E

F

A

G

B

D

02954

Manual

Fig. 30

22

Page 22
Image 22
Poulan 96042003402, 419055 To Replace Mower Blade Drive Belt See Fig, To Check Brake, To Replace Motion Belt Drive See Fig

419055, 96042003402 specifications

The Poulan 96042003402 and 419055 are iconic chainsaw models that cater to both professional and amateur woodworkers. These powerful tools are engineered with innovative technologies and features that set them apart in the competitive landscaping and forestry market.

One of the standout characteristics of the Poulan 96042003402 is its robust engine, typically featuring a 40cc displacement. This engine provides powerful performance, enabling users to tackle a variety of cutting tasks efficiently. The engine is designed with advanced air injection systems that reduce air filter contamination, enhancing engine longevity and requiring less frequent maintenance. This feature not only translates to consistent performance but also makes the tool easier to operate over extended periods.

The 419055 model complements this with an enhanced ergonomic design. It includes padded handles that reduce vibration and improve comfort during prolonged use. This thoughtful design ensures that users can maintain control and reduce fatigue, which is particularly beneficial for those working on large projects or in challenging conditions.

Both models boast a quick-adjust chain tensioning system, simplifying the process of tightening the chain for optimal performance. This feature saves time and enhances safety, as proper chain tension is critical to effective cutting. Furthermore, these chainsaws are equipped with automatic oiler systems that ensure consistent lubrication, which not only enhances cutting efficiency but also extends chain life.

Poulan models are also known for their lightweight construction, improving maneuverability and ease of use. Weighing in under 15 pounds, these chainsaws are suitable for various users, from seasoned professionals to weekend warriors. Despite their lightweight design, they do not compromise power or performance, making them a versatile option for diverse tasks ranging from trimming branches to felling small trees.

Moreover, Poulan places a strong emphasis on user-friendly operation. These chainsaws are equipped with simple starting systems that minimize the effort needed to get the engine running, ensuring that users can quickly get to work. Safety features, including chain brakes and throttle locks, further enhance their usability, providing peace of mind during operation.

In conclusion, the Poulan 96042003402 and 419055 chainsaws are excellent choices for anyone looking for reliable, powerful, and user-friendly tools. With their combination of advanced technology, ergonomic design, and enhanced safety features, they stand out as trusted tools for a range of cutting tasks, meeting the needs of woodworkers and landscapers alike.