SERVICE AND ADJUSTMENTS

TO REMOVE WHEELS (See Fig. 22)

Remove the klik pin and remove wheel from axle.

IMPORTANT: When installing wheel, be sure to use the in- nermost hole in axle and the wheel hub hole. To disengage drive system from the wheels (for pushing or transporting the snow thrower), remove klik pin from wheel hub and insert pin into the outermost hole in axle only.

KLIK PIN

OUTER HOLE

 

INNER

 

HOLE

WHEEL

WHEEL HUB

FIG. 22

NOTE: To seal punctures or prevent flat tires due to slow leaks, tire sealant may be purchased from your local parts dealer. Tire sealant also prevents tire dry rot and corrosion.

ENGINE

See engine manual.

CARBURETOR

Your carburetor is not adjustable. Engine performance should not be affected at altitudes up to 7,000 feet (2,134 meters). If your engine does not operate properly due to suspected carburetor problems, take your snow thrower to a qualified service centre.

ENGINE SPEED

Never tamper with the engine governor, which is factory set for proper engine speed. Overspeeding the engine above the factory high speed setting can be dangerous and will void the warranty. If you think the engine-governed high speed needs adjusting, contact a qualified service centre, which has proper equipment and experience to make any necessary adjustments.

STORAGE

Immediately prepare your unit for storage at the end of the season or if the unit will not be used for 30 days or more.

WARNING: Never store the snow thrower with gasoline in the tank inside a building where fumes may reach an open flame, spark or pilot light as on a furnace, water heater, clothes dryer or gas appliance. Allow the engine to cool before storing in any enclosure.

SNOW THROWER

When snow thrower is to be stored for a period of time, clean it thoroughly, remove all dirt, grease, leaves, etc. Store in a clean, dry area.

1.Clean entire snow thrower (See “CLEANING” in the Maintenance section of this manual).

2.Inspect and replace belts, if necessary (See “TO RE- PLACE BELTS” in the Service and Adjustments section of this manual).

3.Lubricate as shown in the Maintenance section of this manual.

4.Be sure that all nuts, bolts, screws, and pins are securely fastened. Inspect moving parts for damage, breakage and wear. Replace if necessary.

5.Touch up all rusted or chipped paint surfaces; sand lightly before painting.

ENGINE

See engine manual.

FUEL SYSTEM

IMPORTANT: It is important to prevent gum deposits from forming in essential fuel system parts such as carburetor, fuel hose, or tank during storage. Also, alcohol blended fuels (called gasohol or using ethanol or methanol) can attract moisture which leads to separation and formation of acids during storage. Acidic gas can damage the fuel system of an engine while in storage.

Empty the fuel tank by starting the engine and letting it run until the fuel lines and carburetor are empty.

Never use engine or carburetor cleaner products in the fuel tank or permanent damage may occur.

Use fresh fuel next season.

NOTE: Fuel stabilizer is an acceptable alternative in min- imizing the formation of fuel gum deposits during storage. Add stabilizer to gasoline in fuel tank or storage container. Always follow the mix ratio found on stabilizer container. Run engine at least 10 minutes after adding stabilizer to allow the stabilizer to reach the carburetor. Do not drain the gas tank and carburetor if using fuel stabilizer.

ENGINE OIL

Drain oil (with engine warm) and replace with clean en- gine oil. (See “ENGINE” in the Maintenance section of this manual).

CYLINDER

1.Remove spark plug.

2.Pour one ounce (29 ml) of oil through spark plug hole into cylinder.

3.Pull recoil starter handle slowly a few times to distribute oil.

4.Replace with new spark plug.

17

Page 17
Image 17
Poulan 96194000501 owner manual Storage

96194000501 specifications

The Poulan 96194000501 is a powerful and versatile tool designed for homeowners and professionals alike, making yard maintenance an efficient and enjoyable task. Packed with features that cater to a variety of lawn care needs, this lawn mower offers exceptional performance and durability.

One of the standout features of the Poulan 96194000501 is its robust engine. Powered by a reliable 4-cycle gasoline engine, it provides the necessary power to tackle even the toughest grass and terrain. The engine is designed for easy starting, eliminating the frustration often associated with traditional pull-start mechanisms. This feature allows users to get right to work without the hassle of prolonged setup and preparation.

The cutting system of the Poulan 96194000501 is engineered for precision and efficiency. It features a wide cutting deck that allows for a broader cutting path, reducing the time spent mowing. The adjustable cutting heights enable users to customize their mowing experience, accommodating various grass types and seasonal changes. This flexibility ensures a clean, even cut that promotes a healthier lawn.

In addition to its performance features, the Poulan 96194000501 is designed with user comfort in mind. The ergonomic handle ensures a comfortable grip, reducing fatigue during extended use. The mower's lightweight design makes it easy to maneuver, allowing users to navigate tight spaces and obstacles with ease. Furthermore, the inclusion of larger rear wheels enhances stability and traction, making it suitable for uneven terrain.

Durability is another key characteristic of the Poulan 96194000501. Constructed with high-quality materials, this mower is built to withstand the rigors of regular use. Its sturdy frame and deck resist wear and tear, ensuring a long lifespan for the product. Additionally, maintenance tasks are simplified, with features that facilitate easy access to the engine and other components.

The Poulan 96194000501 is also eco-friendly, designed to produce lower emissions compared to traditional models. This environmentally conscious approach allows users to maintain their lawns without contributing significantly to pollution, reflecting a growing trend toward sustainable gardening practices.

In summary, the Poulan 96194000501 stands out in the marketplace due to its powerful performance, user-friendly features, and durability. With an efficient cutting system, adjustable heights, ergonomic design, and eco-friendly operation, this lawn mower proves to be an excellent investment for anyone looking to enhance their lawn care experience. Whether for regular maintenance or tackling larger landscaping projects, the Poulan 96194000501 rises to the occasion, making it a reliable choice for all users.