SERVICE AND ADJUSTMENTS

WARNING: To avoid serious injury, before performing any service or adjustments:

1.Be sure throttle is in STOP position.

2.Remove safety ignition key.

3.Make sure the augers and all moving parts have completely stopped.

4.Disconnect spark plug wire from spark plug and place wire where it cannot contact plug.

SNOW THROWER

TO ADJUST SNOW THROWER HEIGHT

See “TO ADJUST SKID PLATES” and “SCRAPER BAR” in the Operation section of this manual.

CHUTE DEFLECTOR

The chute deflector, attached to the top of the discharge chute, is provided to direct discharging snow away from the operator. If the deflector becomes damaged, it should be replaced.

WARNING: To avoid serious injury, never operate your snow thrower with the deflector removed or damaged.

To change direction and/or distance snow is discharged, see “TO CONTROL SNOW DISCHARGE” in the Op- eration section of this manual.

SHEAR BOLTS (See Fig. 18)

AUGER SHEAR BOLTS

Both right and left-hand augers are secured to the auger shaft with a shoulder/shear bolt and hex nut. Should a for- eign object or ice become lodged in the augers, the shear bolts are designed to break, preventing damage to any other components. If one or both augers do not turn when auger control lever is engaged, check to see if one or both of the bolts have sheared. To replace the shear bolts:

1.Disengage all controls and move throttle control to STOP position. Wait for all moving parts to stop.

2.Disconnect spark plug wire from spark plug and place wire where it cannot come in contact with plug.

3.Align hole in auger hub with hole in auger shaft and install a new 1/4-20 x 2" shoulder/shear bolt. Install 1/4-20 lock nut and tighten securely.

CAUTION: Do not substitute. Use only original equipment shear bolts as supplied with your snow thrower.

4.Connect spark plug wire to spark plug.

IMPELLER SHEAR BOLTS

The impeller is secured to the impeller shaft with two (2) capscrew/shear bolts and hex nuts. Should a foreign object or ice become lodged in the impeller, the capscrews are designed to break, preventing damage to any other com- ponents. If impeller does not turn when auger control lever is engaged, check to see if the capscrews have sheared. To replace the capscrew/shear bolts:

1.Disengage all controls and move throttle control to STOP position. Wait for all moving parts to stop.

2.Disconnect spark plug wire from spark plug and place wire where it cannot come in contact with plug.

3.Align holes in impeller hub with holes in impeller shaft and install two (2) new 1/4-20 x 1-5/8" capscrew/shear bolts. Install 1/4-20 locknuts and tighten securely.

CAUTION: Do not substitute. Use only original equipment capscrew/shear bolts as supplied with your snow thrower.

4. Connect spark plug wire to spark plug.

1/4-20

1/4-20 x 1-5/8

1/4-20 x 2

LOCKNUT

CAPSCREW /

SHOULDER /

 

SHEAR BOLT

SHEAR BOLT

 

IMPELLER HUB

 

 

IMPELLER

 

 

SHAFT

 

 

 

AUGER

 

 

HUB

1/4-20

 

 

LOCKNUT

AUGER HUB

AUGER SHAFT

FIG. 18

TO REMOVE BELT COVER (See Fig. 19)

1.Remove the two screws securing belt cover to frame.

2.Remove belt cover.

Replace belt cover by installing cover and screws and tighten securely.

FRAME

BELT COVER

SCREWS

FIG. 19

TO REPLACE BELTS (See Fig. 20)

The auger and traction drive belts are not adjustable. If the belts are damaged or begin to slip from wear, they should be replaced. It is recommended that the belt(s) be replaced by a qualified service center.

NOTE: It is recommended that both the auger and traction drive belt be replaced at the same time.

TheV-belts on your snow thrower are of special construction and should be replaced by original equipment manufacturer (OEM) belts available from your nearest dealer.Using other than OEM belts can cause personal injury or damage to

15 the snow thrower.

Page 15
Image 15
Poulan B8527ES owner manual Service and Adjustments, To Adjust Snow Thrower Height, Chute Deflector

B8527ES specifications

The Poulan B8527ES is a powerful and reliable snow blower designed specifically for tackling heavy snowfall and providing efficient snow removal for residential users. With its robust design and advanced technologies, this model is perfect for homeowners dealing with winter weather challenges.

One of the standout features of the Poulan B8527ES is its 27-inch clearing width, which allows users to quickly and efficiently clear wide paths in a single pass. This impressive width is complemented by a strong throwing distance, capable of launching snow up to 30 feet away, making it ideal for clearing driveways, sidewalks, and larger outdoor areas.

The snow blower is powered by a reliable 250cc engine, which provides enough torque and power to take on tough snow conditions, including packed and wet snow. The engine is equipped with an electric start feature, ensuring a hassle-free startup even in the coldest temperatures. With the press of a button, users can quickly get to work without the need for strenuous manual cranking.

Comfort and ease of use are also prioritized in the design of the Poulan B8527ES. It features an adjustable handle height, allowing operators to customize the height to their preference, providing a more comfortable grip. The ergonomic controls are intuitively placed, making it easy to operate the machine even while wearing gloves.

The snow blower also boasts a 6-speed transmission which includes 5 forward speeds and 1 reverse speed, allowing users to navigate through various snow depths and types with ease. Its heavy-duty auger and impeller work in tandem to break up and efficiently discharge snow, ensuring a thorough clean-up.

To enhance durability and performance, the Poulan B8527ES is constructed with high-quality materials that are designed to withstand harsh winter conditions. The steel chassis provides robustness while also being lightweight enough for maneuverability. Moreover, the steel auger and impeller are engineered to endure aggressive use, making the machine a dependable choice for years to come.

In conclusion, the Poulan B8527ES is an excellent snow blower that combines power, comfort, and technology to streamline the snow removal process. With its impressive clearing capabilities, user-friendly features, and rugged construction, it stands out as a reliable solution for homeowners facing winter snowstorms.