Cutters

Depth Gauge

Checking the tension:

 

 

Use the screwdriver end of the chain adjust-

 

 

ment tool (bar tool) to move the chain around

 

 

the bar. If the chain does not rotate, it is too

 

 

tight. If too loose, the chain will sag below the

 

 

bar.

Drive Links

Place chain onto the sprocket

7.Place chain over and behind clutch, fitting the drive links in the clutch drum sprocket.

8.Fit bottom of drive links between the teeth in the sprocket in the nose of the guide bar.

9.Fit chain drive links into bar groove.

10.Pull guide bar forward until chain is snug in guide bar groove. Ensure all drive links are in the bar groove.

NOTE: CHAIN BRAKE MUST BE DISENGAGED BEFORE INSTALLA- TION ON THE SAW. TO DISENGAGE CHAIN BRAKE, PULL THE FRONT HAND GUARD BACK TOWARD THE REAR OF THE CHAIN BRAKE AS FAR AS POSSIBLE (SEE ILLUSTRA- TION).

DISENGAGED

Front Hand Guard

ENGAGED

Chain Brake

11.Now, install chain brake making sure the adjusting pin is positioned in the lower hole in the guide bar. Remember this pin moves the bar forward and backward as the screw is turned.

12.Install chain brake nuts and finger tighten only. Once the chain is tensioned, you will need to tighten chain brake nuts.

CHAIN TENSION

(Including units with chain already installed) NOTE: When adjusting chain tension, make sure the chain brake nuts are finger tight only. Attempting to tension the chain when the chain brake nuts are tight can cause damage.

Chain Brake Nuts

Chain Adjustment

Tool (Bar Tool)

Adjusting the tension:

Chain tension is very important. Chain stretches during use. This is especially true during the first few times you use your saw. Always check chain tension each time you use and refuel your saw.

You can adjust the chain tension by loosen- ing the chain brake nuts and turning the ad- justing screw 1/4 of a turn while lifting up on the bar.

SIf chain is too tight, turn adjusting screw 1/4 turn counterclockwise.

SIf chain is too loose, turn adjusting screw 1/4 turn clockwise.

Adjusting

Screw

Chain Brake Nuts

Guide Bar

Adjusting Screw -- 1/4 Turn

SLift up the tip of the bar and securely tight- en the chain brake nuts with the bar tool.

SRecheck chain tension.

Chain Brake

Nuts

WARNING: If the saw is operated with a loose chain, the chain could jump off the guide bar and result in serious injury.

7

Page 6 Page 8
Page 7
Image 7
Poulan BH 2160 instruction manual Checking the tension, Chain Tension, Adjusting the tension
Page 6 Page 8

BH 2160 specifications

The Poulan BH 2160 is a robust and reliable rear-tine tiller designed for both novice gardeners and seasoned horticulturists. With its powerful performance and user-friendly design, the BH 2160 has garnered a positive reputation among outdoor enthusiasts who require an efficient solution for cultivating soil.

At the heart of the Poulan BH 2160 is its potent 208cc four-stroke engine, which delivers ample power to tackle various soil types. The engine is designed for easy starting, ensuring that users can quickly get to work without the frustration of dealing with difficult pull starts. The tiller features a shift-on-the-go transmission with forward and reverse gears, allowing for enhanced maneuverability in tight spaces and making it easier to navigate around flower beds and garden plots.

One of the standout features of the BH 2160 is its robust tilling width. With the capability to till areas up to 16 inches wide, it allows users to cover more ground efficiently in less time. The heavy-duty steel tines dig deep into the soil, churning up stubborn dirt and turning hard ground into ready-to-plant soil. These tines are designed for durability and longevity, ensuring that they can withstand rigorous use over multiple seasons.

Ergonomics play a vital role in the design of the BH 2160, with an adjustable handle that can be tailored to different user heights. This feature promotes comfort during operation, reducing fatigue and enhancing control. The tiller also boasts a lightweight design, making it easier to manage while still providing the sturdy construction needed for tough tilling tasks.

In terms of safety, the Poulan BH 2160 comes equipped with user-friendly controls that are strategically located for easy access, allowing for quick adjustments while in operation. The tiller also features effective safety mechanisms, preventing accidental starts and ensuring that users can work with confidence.

In conclusion, the Poulan BH 2160 is an exceptional rear-tine tiller that expertly combines power, versatility, and ease of use. It is a worthy investment for anyone looking to cultivate their garden with efficiency and reliability. Whether preparing a small backyard garden or tilling larger plots, the BH 2160 provides the necessary power and features to get the job done effectively.
Top Page Image Contents