ASSEMBLY
BEFORE YOU START TO ASSEMBLE THE GRASS CATCHER
Some tractor models may need minor modifications before you can mount the grass catcher to the tractor. Look carefully at the drawbar on your tractor and compare to the illustrations below. If your drawbar looks like STYLE "A" (has the upper corner ribs), your tractor is ready - proceed with the grass catcher assembly.
If your drawbar looks like STYLE "B" (does not have the upper corner ribs), go to the PREPARATION section in this manual.
UPPER
CORNER
RIBS
TRACTOR DRAWBAR | TRACTOR DRAWBAR |
STYLE "A" | STYLE "B" |
023 | 20 |
|
02321
PARTS IDENTIFICATION
COVER
WAR | NING |
|
UPPER CHUTE
DUMP
BAG
INDICATOR
CHUTE LATCH
WAR | NING |
|
LOWER CHUTE
| RNIN | G |
|
| |
| WA |
|
| 02079 |
|
|
| LOWER CHUTE |
GRASS |
| ATTACHING |
CATCHER |
| STRAPS |
CONTAINERS |
|
|
NOTE: When right hand (R.H.) and left hand (L.H.) are mentioned in this manual, it means when you are seated on the tractor, in the operator's position.
THESE ARE THE TOOLS YOU WILL NEED TO ASSEMBLE YOUR GRASS CATCHER:
(1) | 3/8" Wrench | (1) | Drive Ratchet |
(1) | 1/2" Wrench | (1) | 3" or longer Extension |
(2) | 9/16" Wrenches | (1) | Short Handle |
(1) | 1/2" Socket |
| Phillips Screwdriver |
CAUTION: BEFORE ASSEMBLING GRASS CATCHER TO TRACTOR:
•Depress clutch/brake pedal fully and set parking brake.
•Place gearshift/motion control lever in "NEUTRAL" position.
•Place attachment clutch in "DISENGAGED" position.
•Turn ignition key "OFF" and remove key.
•Make sure the blade and all moving parts have completely stopped.
•Disconnect spark plug wire from spark plug and place wire where it cannot come in contact with plug.
6