TO REPLACE MOWER BLADE DRIVE BELT

The mower blade drive belt may be replaced without tools. Park the tractor on level surface. Engage parking brake.

BELT REMOVAL -

1.Remove mower from tractor (See “TO REMOVE MOWER” in this section of manual).

2.Work belt off both mandrel pulleys and idler pulleys.

3.Pull belt away from mower.

BELT INSTALLATION -

1.Work belt around both mandrel pulleys and idler pulleys

2.Make sure belt is in all pulley grooves and inside all belt guides.

3.Install mower (See “To Install Mower” in this section of this manual).

Idler Pulleys

Mandrel

Pulley

Mandrel

Pulley

0231 4

TO CHECK AND ADJUST BRAKE

Your tractor is equipped with an adjustable brake system which is mounted on the right side of the transaxle.

If tractor requires more than five (5) feet to stop at highest speed in highest gear on a level, dry concrete or paved surface, then brake must be checked and adjusted.

TO CHECK BRAKE

1.Park tractor on a level, dry concrete or paved surface, depress clutch/brake pedal all the way down and engage parking brake.

2.Place gear shift lever in neutral (N) position.

The rear wheels must lock and skid when you try to manually push the tractor for- ward. If the rear wheels rotate, the brake needs to be adjusted or the pads need to be replaced.

TO ADJUST BRAKE

1.Depress clutch/brake pedal all the way down and engage parking brake.

2.Measure distance between brake oper- ating arm and nut “A” on brake rod.

3.If distance is other than 1-1/2", loosen jam nut and turn nut “A” until distance becomes 1-1/2". Retighten jam nut against nut “A”.

4.Road test tractor for proper stopping distance as stated above. Readjust if necessary. If stopping distance is still greater than five (5) feet in highest gear, further maintenance is nec- essary. Contact an authorized service center/department.

With parking brake “Engaged”

1-1/2"

Nut “A”

Jam Nut

Operating Arm

00238

TO REPLACE MOTION DRIVE BELT

Park the tractor on level surface. Engage parking brake. For assistance, there is a belt installation guide decal on bottom side of left footrest.

BELT REMOVAL -

1. Remove mower (See “TO REMOVE MOWER” in this section of manual).

NOTE: Observe entire motion drive belt and position of all belt guides and keepers.

2.Remove belt from stationary idler and clutching idler.

3.Remove belt downward from around engine pulley.

4.Pull belt slack toward rear of tractor. Remove belt upwards from transaxle pulley by deflecting belt keepers.

5.Remove belt from center span keeper and pull belt away from tractor.

BELT INSTALLATION -

1.Carefully work new belt down between transaxle belt keepers and onto the input pulley.

2.Slide belt into the center span keeper.

3.Pull belt toward front of tractor and roll around the top groove of engine pulley.

4.Install belt through stationary idler and clutching idler.

5.Make sure belt is in all pulley grooves and inside all belt guides and keepers.

6.Install mower (See “TO INSTALL

MOWER” in this section of manual).

22

Page 22
Image 22
Poulan CN1842STA manual To Replace Mower Blade Drive Belt, To Check and Adjust Brake, To Replace Motion Drive Belt

CN1842STA specifications

The Poulan CN1842STA is a versatile and reliable riding lawn mower designed to make lawn care efficient and straightforward. With its robust features and reliable performance, this mower is ideal for homeowners with medium to large-sized lawns.

One of the standout features of the Poulan CN1842STA is its powerful 18.5 HP Briggs & Stratton engine. This engine provides ample power for cutting through thick grass and tackling uneven terrain. The easy-starting engine ensures that users spend less time preparing and more time mowing.

The cutting deck of the CN1842STA is a 42-inch wide design, which allows for a larger cutting path while maintaining maneuverability around obstacles. The deck height can be easily adjusted to suit various grass lengths, providing flexibility in lawn care. With a cutting height range of 1 to 4 inches, users can customize their lawn treatment according to seasonal needs.

Another attractive aspect of this riding mower is its hydrostatic transmission. Unlike traditional gear-driven mowers, the hydrostatic transmission allows for smooth, effortless speed changes. This makes it easier to navigate tight spots or slow down for detailed trimming work.

The Poulan CN1842STA also features a comfortable high-back seat designed to reduce fatigue during long mowing sessions. The steering wheel is ergonomically designed, offering users excellent control and maneuverability. Moreover, the intuitive dashboard provides essential information at a glance, ensuring the operator can monitor performance without losing focus on the task.

Built with durability in mind, the CN1842STA features a rugged frame and strong chassis, designed to withstand the rigors of outdoor use. The mower's design incorporates a reinforced cutting deck, ensuring it can handle tough mowing conditions without compromising performance.

The Poulan CN1842STA is also equipped with ease of maintenance in mind. Access points for the engine and cutting deck are designed for convenience, allowing for quick oil changes and blade sharpening.

Overall, the Poulan CN1842STA offers an excellent blend of power, comfort, and reliability, making it a valuable asset for anyone looking to maintain a well-manicured lawn with minimal effort. With its combination of user-friendly features and robust technology, this riding mower stands out as a top choice for lawn care enthusiasts.