Poulan DB18542YT manual Transaxle Gear Shift Lever NEUTRAL- Adjustment See Fig

Models: DB18542YT

1 30
Download 30 pages 7.62 Kb
Page 22
Image 22

SERVICE AND ADJUSTMENTS

TRANSAXLE GEAR SHIFT LEVER NEUTRAL- ADJUSTMENT (See Fig. 22)

The transaxle should be in neutral when the gear shift lever is in neutral (N) (lock gate) position. The adjustment is preset at the factory; however, if adjustment is needed, proceed as follows:

Make sure transaxle is in neutral (N).

NOTE: When the tractor rear wheels move freely, the transaxle is in neutral.

Loosen adjustment bolt in front of the right rear wheel.

Position the gear shift lever in the neutral (N) posi- tion.

Tighten adjustment bolt securely.

NOTE: If additional clearance is needed to get to adjustment bolt, move mower deck height to the lowest position.

NEUTRAL

LOCK GATE

GEARSHIFT LEVER

ADJUSTMENT

BOLT

FIG. 22

TO ADJUST STEERING WHEEL ALIGN- MENT

If steering wheel crossbars are not horizontal (left to right) when wheels are positioned straight forward, remove steer- ing wheel and reassemble per instructions in the Assembly section of this manual.

FRONT WHEEL TOE-IN/CAMBER

The front wheel toe-in and camber are not adjustable on your tractor.If damage has occurred to affect the front wheel toe-in or camber, contact your nearest authorized service center/department.

TO REMOVE WHEEL FOR REPAIRS (See Fig. 23)

RETAINING WASHERS

RING

AXLE

COVER

SQUARE KEY (REAR

WHEEL ONLY)

FIG. 23

TO START ENGINE WITH A WEAK BATTERY (See Fig. 24)

WARNING: Lead-acid batteries gen- erate explosive gases. Keep sparks, flame and smoking materials away from batteries. Always wear eye protection when around batteries.

If your battery is too weak to start the engine, it should be recharged. (See "BATTERY" in the Maintenance section of this manual).

If “jumper cables” are used for emergency starting, follow this procedure:

IMPORTANT: YOUR TRACTOR IS EQUIPPED WITH A 12 VOLT SYSTEM. THE OTHER VEHICLE MUST ALSO BE A 12 VOLT SYSTEM. DO NOT USE YOUR TRACTOR BATTERY TO START OTHER VEHICLES.

TO ATTACH JUMPER CABLES -

Connect one end of the RED cable to the POSITIVE

(+)terminal of each battery(A-B), taking care not to short against tractor chassis.

Connect one end of the BLACK cable to the NEGATIVE (-) terminal (C) of fully charged battery.

Connect the other end of the BLACK cable (D) to good chassis ground, away from fuel tank and battery.

TO REMOVE CABLES, REVERSE ORDER -

BLACK cable first from chassis and then from the fully charged battery.

RED cable last from both batteries.

Block up axle securely.

Remove axle cover, retaining ring and washers to allow wheel removal (rear wheel contains a square key - Do not lose).

Repair tire and reassemble.

On rear wheels only: align grooves in rear wheel hub and axle. Insert square key.

Replace washers and snap retaining ring securely in axle groove.

Replace axle cover.

WEAK OR DEAD BATTERY

FULLY CHARGED

BATTERY

NOTE: To seal tire punctures and prevent flat tires due to slow leaks, tire sealant may be purchased from your local parts dealer. Tire sealant also prevents tire dry rot and corrosion.

FIG. 24

22

Page 22
Image 22
Poulan DB18542YT manual Transaxle Gear Shift Lever NEUTRAL- Adjustment See Fig, To Adjust Steering Wheel ALIGN- Ment

DB18542YT specifications

The Poulan DB18542YT is a versatile and reliable garden tractor designed to handle a variety of landscaping tasks. Known for its durability and ease of use, this model is ideal for homeowners with medium to large yards.

One of the standout features of the DB18542YT is its powerful 18.5 horsepower Briggs & Stratton engine. This engine delivers ample power to tackle tough mowing conditions and ensures consistent performance throughout the mowing session. The efficient air-cooled design helps in maintaining optimal operating temperatures, enhancing the longevity of the engine.

Equipped with a 42-inch cutting deck, the DB18542YT allows users to cover more ground in less time, making it perfect for mowing larger lawns. The cutting deck also features a durable steel construction that is built to withstand the rigors of outdoor use. Furthermore, the deck height can be easily adjusted to achieve the desired grass length, offering versatility for different mowing conditions.

The Poulan DB18542YT includes a hydrostatic transmission, delivering a smooth and responsive driving experience. Unlike traditional gear-driven systems, this transmission allows for effortless speed adjustments without the need for manual shifting. This feature makes it easy for users to navigate around obstacles and varying terrain.

Another notable technology featured in this model is its mulching capability. With the optional mulching kit, users can efficiently recycle grass clippings, returning essential nutrients back into the soil. This not only promotes a healthier lawn but also reduces the amount of waste generated from mowing.

Comfort is also a priority in the design of the DB18542YT. The tractor comes with a comfortable high-back seat that provides excellent support during extended mowing sessions. Its user-friendly controls are strategically positioned for easy access, allowing the operator to focus on the task at hand without distraction.

In addition to mowing, the Poulan DB18542YT is compatible with a range of attachments, such as baggers and snow throwers. This adaptability enhances its functionality, making it a year-round gardening equipment solution.

In summary, the Poulan DB18542YT is a robust and feature-rich garden tractor that stands out for its powerful engine, efficient cutting deck, hydrostatic transmission, and versatile attachment options. Whether you're tackling mowing, mulching, or snow removal, this model delivers reliable performance for all your outdoor needs.