CUTTING SAFETY

WARNING: Inspect the area before each use. Remove objects (rocks, broken glass, nails, wire, etc.) which can be thrown by or become entangled in line. Hard objects can damage the trimmer head and be thrown causing serious injury.

SUse only for trimming, scalping, mowing and sweeping. Do not use for edging, pruning or

hedge trimming.

SKeep firm footing and balance. Do not over-

reach.

SKeep all parts of your body away from muffler and spinning line. Keep engine below waist level. A hot muffler can cause serious burns.

SCut from your right to your left. Cutting on left side of the shield will throw debris away from

the operator.

SUse only in daylight or good artificial light. S Use only for jobs explained in this manual.

TRANSPORTING AND STORAGE

S Allow engine to cool; secure unit before stor- ing or transporting in vehicle.

S Empty the fuel tank before storing or trans- porting the unit. Use up fuel left in the carbure- tor by starting the engine and letting it run until it stops.

S Store unit and fuel in area where fuel vapors cannot reach sparks or open flames from wa- ter heaters, electric motors or switches, fur- naces, etc.

S Store unit so line limiter blade cannot acciden- tally cause injury. The unit can be hung by the tube.

S Store unit out of reach of children.

SAFETY NOTICE: Exposure to vibrations through prolonged use of gasoline powered hand tools could cause blood vessel or nerve damage in the fingers, hands, and joints of people prone to circulation disorders or ab- normal swellings. Prolonged use in cold weather has been linked to blood vessel dam- age in otherwise healthy people. If symptoms occur such as numbness, pain, loss of strength, change in skin color or texture, or loss of feeling in the fingers, hands, or joints, discontinue the use of this tool and seek med- ical attention. An anti--vibration system does not guarantee the avoidance of these prob- lems. Users who operate power tools on a continual and regular basis must monitor closely their physical condition and the condi- tion of this tool.

SPECIAL NOTICE: This unit is equipped with a temperature limiting muffler and spark arresting screen which meets the require- ments of California Codes 4442 and 4443. All U.S. forest land and the states of California, Idaho, Maine, Minnesota, New Jersey, Ore- gon, and Washington require by law that many internal combustion engines be equipped with a spark arresting screen. If you operate in a locale where such regulations ex- ist, you are legally responsible for maintaining the operating condition of these parts. Failure to do so is a violation of the law. For normal homeowner use, the muffler and spark arrest- ing screen will not require any service. After 50 hours of use, we recommend that your muffler be serviced or replaced by your autho- rized service dealer.

WARNING: If received assembled, repeat all steps to ensure your unit is properly assembled and all fasteners are secure.

Examine parts for damage. Do not use dam- aged parts.

NOTE: If you need assistance or find parts missing or damaged, call 1-800-554-6723.

It is normal for the fuel filter to rattle in the empty fuel tank.

Finding fuel or oil residue on muffler is normal due to carburetor adjustments and testing done by the manufacturer.

tion from the risk of thrown objects to the opera- tor and others and is equipped with a line limiter blade which cuts excess line to the proper length. The line limiter blade (on underside of shield) is sharp and can cut you.

For proper orientation of shield, see KNOW YOUR TRIMMER illustration in OPERATION section.

1.Remove wing nut from shield.

2.Insert bracket into slot as shown.

3.Pivot shield until bolt passes through hole in bracket.

4.Securely tighten wing nut onto bolt.

ADJUSTING THE HANDLE

WARNING: When adjusting the han- dle, be sure it remains between the trigger and the safety label.

1.Loosen wing nut on handle.

2.Rotate the handle on the tube to an upright position; retighten wing nut.

ATTACHING SHIELD

WARNING: The shield must be prop- erly installed. The shield provides partial protec-

3

 

 

 

 

 

 

 

 

 

Slot

Shield

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Bracket

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Wing

Line Limiter Blade

 

 

 

 

 

 

 

Nut

 

 

 

 

 

 

 

 

 

Page 2 Page 4
Page 3
Image 3
Poulan FX25 LE, XT250 LE Cutting Safety, Transporting and Storage, Adjusting the Handle, Attaching Shield
Page 2 Page 4

FX25 LE, XT250 LE specifications

The Poulan FX25 LE and XT250 LE are two powerful trimmers designed to meet the demands of landscaping professionals and homeowners alike. Packed with innovation, these models stand out in terms of performance, user comfort, and usability.

At the heart of the Poulan FX25 LE is a robust 25cc 2-stroke engine. This engine provides ample power for tackling thick grass, stubborn weeds, and overgrown areas with ease. The XT250 LE features a slightly larger 26cc engine, enhancing its capabilities for heavier-duty tasks. The engines are designed for efficiency, delivering excellent fuel economy while maintaining a high-power output, essential for prolonged use.

Both models incorporate advanced starting technology. The Easy Start feature ensures that users can get their trimmers running effortlessly, reducing the frustration commonly associated with starting small engines. These trimmers are equipped with an automatic choke, enhancing their user-friendliness, especially for those who may not be familiar with two-stroke engines.

Another highlight of these models is their lightweight design, which significantly reduces user fatigue during extended periods of operation. Weighing in at less than 10 pounds, they are easy to maneuver, making them ideal for trimming delicate landscapes and navigating tight corners.

The Poulan FX25 LE and XT250 LE come with ergonomically designed handles that provide a comfortable grip, allowing for prolonged usage without compromising control. The adjustable harness on the XT250 LE not only adds comfort but also distributes weight more evenly, adding to the ease of operation.

Additionally, both trimmers feature a dual-line cutting system, which provides a wider cutting path to enhance efficiency. The rapid reload spool allows users to replace the line quickly and easily without the need for additional tools. This feature saves time and ensures that users spend more time trimming and less time on maintenance.

Durability is another significant aspect of these models. Constructed with high-quality materials, the Poulan FX25 LE and XT250 LE are built to withstand the rigors of outdoor use. They are also equipped with protective shields to safeguard the user from debris while operating.

In summary, the Poulan FX25 LE and XT250 LE trimmers offer a powerful, efficient, and user-friendly experience. With features such as robust engines, easy starting mechanics, lightweight design, ergonomic handles, and a dual-line cutting system, they are well-suited for any landscaping task. Whether you are a homeowner maintaining your garden or a professional landscaper, these trimmers provide the reliability and performance necessary to achieve excellent results.
Top Page Image Contents