Jenn-Air JJW2727 To Set a Delay Start, To Activate the Button Lock, Delay with Cook Timer

10.Select the doneness level: medium rare, medium or well- done, or set the probe temperature if available.

NOTE: An appropriate probe temperature has been set as the default temperature for your selected doneness. Food should be removed from the oven when the probe notifies you, covered and allowed to stand for 10-15 minutes. The

10-15 minutes rest allows the temperature of the food to increase to your desired doneness level.

11.To set a desired cooking temperature, select the Oven Temp option and enter the desired temperature. The temperature must be set between 170°F (77°C) and 550°F (288°C).

12.(Optional) To set a delayed start, press the quickset pad next to Delay Start and set desired time. See “Delay Start” for additional information.

13.Press START to begin cooking.

14.Press CANCEL OVEN (CANCEL UPPER or CANCEL LOWER, on double models) to turn off the oven.

Delay Start

WARNING

Food Poisoning Hazard

Do not let food sit in oven more than one hour before or after cooking.

Doing so can result in food poisoning or sickness.

Delay Start allows the oven(s) to be set to turn on at a certain time of day. This feature can be set to use with the Cook Timer, while using the probe, or as a delayed start with no Cook Timer. Delay Start should not be used for food such as breads and cakes because they may not bake properly.

Delay Start is available in any cycle that has a Delay Start button. You may need to select Set Cook Timer to access the Delay Start option. The Set Cook Timer option is available on the Temperature screen.

To Set a Delay Start:

1.From any cycle with the Delay Start button available, press the quickset pad next to Delay Start and set start time.

2.Set time by touching the quickset pads.

3.Press START.

NOTE: When no cook timer is set, the oven will automatically turn off after cooking 12 hours. The Sabbath Mode disables the 12-hour shutoff.

Delay with Cook Timer:

1.After programming the cook timer, select Delay Start and use the quickset pads to select the desired start time. The end time should equal the start time plus the Cook Timer.

2.Press START.

NOTE: When the cook timer ends, the oven will turn off.

Delay with Probe:

WARNING

Burn Hazard

Use an oven mitt to remove temperature probe. Do not touch broil element.

Failure to follow these instructions can result in burns.

1.If Delay with Probe is chosen, use the quickset pads to select the desired start time. Because the probe controls the end time, an end time will not be displayed.

2.The oven will automatically keep the food warm when the probe reaches the target temperature.

3.Press START.

Button Lock

The Button Lock allows all the buttons to be locked.

To Activate the Button Lock:

1.From the Select Mode menu, touch the MORE button until Button Lock appears. Press the quickset pad next to it.

2.While the buttons are locked, there is a “locked” icon on the idle screen.

To Deactivate the Button Lock:

1.If any button was pressed, an unlock message will appear on the screen.

2.To unlock, press and hold the START button for 3 seconds.

24