Before Starting the Engine, To Operate on Hills

OPERATION

REVERSE OPERATION SYSTEM (ROS)

Your tractor is equipped with a Reverse Operation System (ROS). Any attempt by the operator to travel in the reverse direction with the attachment clutch engaged will shut off the engine unless ignition key is placed in the ROS "ON" position.

WARNING: Backing up with the attachment clutch en- gaged while mowing is strongly discouraged. Turning the ROS "ON", to allow reverse operation with the attachment clutch engaged, should only be done when the operator decides it is necessary to reposition the machine with the attachment engaged. Do not mow in reverse unless absolutely necessary.

USING THE REVERSE OPERATION SYSTEM -

Only use if you are certain no children or other bystanders will enter the mowing area.

•Depress brake pedal all the way down.

•With engine running, turn ignition key counterclockwise to ROS "ON" position.

•Look down and behind before and while backing.

•Slowly move motion control lever to reverse (R) position to start movement.

•When use of the ROS is no longer needed, turn the ignition key clockwise to engine "ON" position.

ROS "ON" POSITION	ENGINE "ON" POSITION
	(NORMAL OPERATING)

TO TRANSPORT (See Figs. 3 and 11)

When pushing or towing your tractor, be sure to disengage transmission by placing freewheel control in freewheeling position. Free wheel control is located at the rear drawbar of tractor.

•Raise attachment lift to highest position with attachment lift control.

•Pull freewheel control out and down into the slot and release so it is held in the disengaged position.

•Do not push or tow tractor at more than two (2) MPH.

•To reengage transmission, reverse above procedure.

NOTE: To protect hood from damage when transporting your tractor on a truck or a trailer, be sure hood is closed and secured to tractor. Use an appropriate means of tying hood to tractor (rope, cord, etc.).

Transmission Engaged

Transmission Disengaged

02828

TO OPERATE ON HILLS

CAUTION: Do not drive up or down hills with slopes greater than 15° and do not drive across any slope.

•Choose the slowest speed before starting up or down hills.

•Avoid stopping or changing speed on hills.

•If slowing is necessary, move throttle control lever to slower position.

•If stopping is absolutely necessary, push clutch/brake pedal quickly to brake position and engage parking brake.

•Move motion control lever to neutral (N) position.

IMPORTANT: THE MOTION CONTROL LEVER DOES NOT RETURN TO NEUTRAL (N) POSITION WHEN THE CLUTCH/ BRAKE PEDAL IS DEPRESSED.

•To restart movement, slowly release parking brake and clutch/brake pedal.

•Slowly move motion control lever to slowest setting.

•Make all turns slowly.

FIG. 11

SERVICE REMINDER/HOUR METER

Service reminder shows the total number of hours the engine has run and ﬂashes to indicate that the engine or mower needs servicing. When service is required, the service reminder will ﬂash for two hours. To service engine and mower, see the Maintenance section of this manual.

NOTE: Service reminder runs when the ignition key is in any position but "STOP". For accurate reading, be sure key remains in the "STOP" position when engine is not running.

TOWING CARTS AND OTHER ATTACHMENTS

Tow only the attachments that are recommended by and comply with speciﬁcations of the manufacturer of your trac- tor. Use common sense when towing. Too heavy of a load, while on a slope, is dangerous. Tires can lose traction with the ground and cause you to lose control of your tractor.

BEFORE STARTING THE ENGINE

CHECK ENGINE OIL LEVEL

The engine in your tractor has been shipped, from the factory, already ﬁlled with summer weight oil.

	• Check engine oil with tractor on level ground.
	• Remove oil ﬁll cap/dipstick and wipe clean, reinsert the
	dipstick and screw cap tight, wait for a few seconds,
	remove and read oil level. If necessary, add oil until
	“FULL” mark on dipstick is reached. Do not overﬁll.
	• For cold weather operation you should change oil for
	easier starting (See “OIL VISCOSITY CHART” in the
	Maintenance section of this manual).
11	• To change engine oil, see the Maintenance section in
	this manual.

PB22H42YT specifications

The Poulan PB22H42YT is a highly efficient riding mower designed for homeowners who prioritize both performance and comfort. This machine offers a perfect blend of advanced features and robust technology, making it an excellent choice for maintaining medium to large lawns.

One of the standout features of the PB22H42YT is its powerful 22 HP Briggs & Stratton engine. This engine delivers reliable performance, ensuring that the mower can handle various mowing conditions with ease. The overhead valve technology in the engine not only enhances fuel efficiency but also reduces emissions, making it an eco-friendly option for lawn care.

The Poulan PB22H42YT comes equipped with a 42-inch cutting deck, which is perfect for efficiently cutting grass in larger areas. The deck is designed for superior maneuverability, allowing the operator to navigate around trees and flower beds without hassle. Furthermore, the deck height can be easily adjusted to achieve the desired cutting height, ranging from 1.5 to 4 inches.

Another notable characteristic of the PB22H42YT is its hydrostatic transmission. This feature provides a smooth and responsive driving experience, allowing the operator to easily change speed and direction without the need for gear shifting. This is particularly beneficial on uneven terrain or when working around obstacles.

Comfort is also a key aspect of the Poulan PB22H42YT design. The mower is equipped with a comfortable, padded seat that offers ample support during long mowing sessions. The easy-to-reach control panel and ergonomic steering wheel further enhance the user experience, making it a joy to operate.

In terms of maintenance, the Poulan PB22H42YT is designed for convenience. Its easy-access engine and removable cutting deck make tasks like oil changes, blade sharpening, and cleaning a breeze, ensuring that the mower remains in peak condition.

The PB22H42YT also offers an impressive turning radius, allowing for agile navigation in tight spaces. Coupled with its durable construction, the mower promises longevity and reliability over many seasons of lawn care.

In summary, the Poulan PB22H42YT is a feature-rich riding mower that combines power, efficiency, and comfort. With its impressive engine, hydrostatic transmission, and user-friendly design, it stands out as an excellent choice for those looking to maintain their lawns effectively and effortlessly.

Poulan PB22H42YT Before Starting the Engine, Reverse Operation System ROS, To Operate on Hills

Models: PB22H42YT