ASSEMBLY
LB
M
K
AF
E
H
S
C
D
FIG. 10 |
| |
• Turn steering wheel to position wheels straight |
| |
forward. |
|
|
• ATTACH FRONT LINK (E) - Work from left side of |
| M |
tractor. Insert rod end of link assembly through |
| |
|
| |
front hole in tractor front suspension bracket (F) |
|
|
and secure with7/16 retainer spring (G) through |
|
|
hole in link located behind the bracket. |
|
|
• Insert other end of link (E) into hole in front mower |
|
|
bracket (H) and secure with washer and 5/16 retainer |
|
|
spring (J). |
|
|
|
|
|
EH J
F
G
FIG. 11
•Disengage belt tension rod (K) from locking bracket
(L).
•Install belt onto engine clutch pulley (M).
IMPORTANT: Check belt for proper routing in all mower pulley grooves.
FIG. 12
•Engage belt tension rod (K) on locking bracket
(L).
CAUTION: Belt tension rod is spring loaded. Have a tight grip on rod and engage slowly.
•Raise attachment lift lever to highest position.
•If necessary, adjust gauge wheels before operating mower as shown in the Operation section of this manual.
8
