Specifications, RGB, 3CCD, HD, VD, Index | Toshiba IK-TF7 guide

10. SPECIFICATIONS

Power supply	DC12V± 10%
Power consumption	Approx.3.6W
Pick-up system	RGB, 3CCD
Image sensor	1/3inch All pixels CCD
(Effective pixels)	(Horizontal : 1034pixels, Vertical : 779pixels)
Scanning system	Progressive scan
Scan frequency	Horizontal : 23.229kHz, Vertical : 29.18Hz
Sync system	Internal/External (Automatic switching)
Horizontal resolution	768TV lines
Sensitivity	F6.8 standard (2000 lx, 3000K)
Minimum illumination	14 lx (F2.2, Sensitivity + 18 dB, 3000K)
Lens mount	C mount (flange back : 17.526 mm in-air)
Ambient temperature	32 to 104° F (0 to 40° C)
Ambient humidity	Less than 90%
Weight	Approx. 5.82oz (165g)
External dimension	1.73” (W) x 1.73” (H) x 3.07” (D)
	(44 (W) x 44 (H) x 78 (D) mm)			(except for protruded portion)
White balance	AWB (Automatic white balance), MANUAL (Manual)
Gain	MANUAL (Manual), OFF (0 dB)
Output signal	RGB : 75Ω unbalanced, D sub 15 pin connector
External sync input	HD or VD :	2 – 5 V(p-p) Negative
Sync signal output	SYNC :	2.0V±	1 V(p-p) 75Ω unbalanced
	HD, VD, INDEX :	+0.5	V(p-p), Negative
	HD, VD, INDEX :	5V -1.0	V(p-p), Negative
		Load impedance : More than 10 kW
Interface	Serial data interface (RS-232C)
Optional parts	EXC-TF05B (RGB cable), etc

34

IK-TF7(E)

Page 34

2004.03.24, 0:59 PMAdobe PageMaker 6.5J/PPC

Image 34

Toshiba IK-TF7 instruction manual Specifications, RGB, 3CCD, HD, VD, Index

Contents

IK-TF7 For Customer Use Safety Precautions Disclaimer Table of Contents Components Items Controlled by Using on Screen Display Available selectins Names and Functions Connection Connector Pin AssignmentsStandard Connection Automatic White Balance Manual White Balance Outline OperationWhite Balance Result displayed Meaning Shading Correction Shutter speed mode is E.TRG modeGain OFF Power on Mode Setting by on Screen DisplayUsing the Menues Disp Menus Changing each setting in Manu modePartial scanning setting Shutter Electronic shutter Mode = SS Changing each setting in SS synchro. scan modeChanging the shutter speed setting Changing the polarity of inputting trigger pulse setting Changing each setting in E.TRG modeChanging each setting in 1P SNR mode Changing 1P SNR exposure time setting Mode = E.TRG E.TRG = 1P SR Changing each setting in 1P SR modeChanging 1P SR exposure time setting Changing each setting in PW SNR mode Mode = E.TRG E.TRG = PW SNR Changing each setting in PW SR mode Mode = E.TRG E.TRG = PW SR Changing each setting in Gain Changing each setting in RR modeMode = E.TRG E.TRG = RR Changing the gain in Manu mode WHT BAL White balance Changing R pedestal Changing shading correction modeChanging master pedestal Changing B pedestal Option Adjusting horizontal phaseSync Changing RGB Sync Shutter mode HD input VD input Setting to factory setting statusExternal sync signal input conditions External Sync Setting by 1H Setting by the frameUsing the unit with external sync signal Synchro. Scan Operatin 1P SNR 1 Pulse Trigger Sync Non Reset EXT Trig External trigger VD OUT*3 Video Index 1 Pulse Trigger SYNC-RESET Picture Output Timing 1P SR 1 Pulse Trigger Sync ResetVD OUT PW SNR Pulse width trigger SYNC-NON Reset VD OUT Video Index 1 Pulse Width Trigger SYNC-RESET Picture Output Timing PW SR Pulse width trigger SYNC-RESETVD OUT*3 Long Term Exposure RR Reset restartInput Timing Chart Example Video OUT Video Index Partial Scanning OFF All pixels scanning When Partial Scanning Mode is onPartial Scanning Partial Scanning on Input Output Signal Specificatoins Vertical Output Waveform Timing Chart CCD Output Waveform Timing ChartHorizontal Output Waveform Timing Chart CCD RGB, 3CCD SpecificationsHD, VD, Index Before Making a Service Call External Appearance DiagramSymptom Items to be checked Step-by-step Procedures How to Obtain Warranty Service Limited One 1 Year Warranty of Labor and PartsImaging Systems Division