1. CAUTIONS ON USE AND INSTALLATION
• Carefully handle the units. | • Handling of the protection cap. | |
Do not drop, or give a strong shock or vibration to | Keep the protection cap away from children. Chil- | |
the camera. This may cause problems. Treat the | dren may put them into mouth or swallow them | |
camera cables carefully to prevent cable problems, | accidentally. The protection cap protects the im- | |
such as cable breakdown and loosened connec- | age sensing plane when the lens is removed from | |
tions. | the camera, do not throw away. | |
• Do not shoot intense light. | • When not using the camera for a longtime. | |
If there is an intense light at a location on the | Stop supplying power. | |
screen such as a spot light, a blooming and smear- | • When cleaning the camera. | |
ing may occur. When intense light enters, vertical | ||
Always turn off the power and clean with a piece | ||
stripes may appear on the screen. This is not a | ||
of soft dry cloth. Do not use benzine, alcohol, thin- | ||
malfunction. Ghosts may occur when there is an | ||
ner, household detergents, chemically treated | ||
intense light near the object. In this case, change | ||
cloths, etc. If used, coating and printed letters may | ||
the shooting angle. | ||
be discolored. When cleaning the lens, use a lens | ||
• Install the camera in a location free from noise. | ||
cleaning paper, etc. | ||
If the camera or the cables are located near power | • Avoid using or storing the camera in the fol- | |
utility lines or a TV, etc. undesirable noise may ap- | ||
lowing places: | ||
pear on the screen. In such a case, try to change | ||
Places filled with highly flammable gas. | ||
the location of the camera or the cable wiring. | ||
| ||
• Moire | Places near gasoline, benzene, or paint thinner. | |
Places subject to strong vibration. | ||
When thin stripe patterns are shot, stripe patterns | ||
| ||
that are not actually there (moire) may appears | Places contacting chemicals (such as pesticides), | |
as interference stripes. This is not a malfunction. | rubber or vinyl products for a long period of time. | |
• Operating ambient temperature and humidity. |
| |
Do not use the camera in places where tempera- |
| |
ture and humidity exceed the specifications. Pic- |
| |
ture quality will lower and internal parts may be |
| |
damaged. |
| |
Be particularly careful when using in places ex- |
| |
posed to direct sunlight. When shooting in hot |
| |
places, depending on the conditions of the object |
| |
and the camera (for example when the gain is in- |
| |
creased), noise in the form of vertical strips or |
| |
white dots may occur. This is not a malfunction. |
|
2. COMPONENTS |
| |
(1) | Camera | 1 |
(2) | Accessories |
|
| (a) Instruction manual | 1 |
5
Page 5 | 2004.03.24, 0:59 PMAdobe PageMaker 6.5J/PPC |
