PW SR Pulse width trigger SYNC-RESET, VD OUT*3

( 4 ) PW SR (Pulse width trigger SYNC-RESET)

The trgger input to the RGB terminal develops 1 frame images.

(4. 1) 1 Pulse Width Trigger SYNC-RESET Picture Output Timing

Negative polarity mode

Trigger*1

Positive polarity mode

About 1 ∝ s	About 7 ∝ s

	Exposure period*2
	Exposure period*2

Exposure completion
		0 to 1H

VD OUT*3

Video output

VIDEO INDEX

796H (Partial scanning OFF)

387H (Partial scanning 60fps)

258H (Partial scanning 90fps)

*1: Externally input signal

*2: Exposure time = Trigger pulse width + 6 ∝ s

(Valid trigger pulse width is 2 ∝ s or greater for external trigger shutter operation.)

*3: VD is generated after 0 to 1H following the completion of the exposure period and the video is synchro- nized to this and output.

Note:

When the next trigger is input before completion of the output of the video corresponding to the trig- ger, there will be an effect on the video.

IK-TF7(E)

Page 29

2004.03.24, 0:59 PMAdobe PageMaker 6.5J/PPC

Page 29

Image 29

Toshiba IK-TF7 PW SR Pulse width trigger SYNC-RESET, Pulse Width Trigger SYNC-RESET Picture Output Timing, VD OUT*3

Contents

For Customer Use IK-TF7 Safety Precautions Disclaimer Table of Contents Components Available selectins Items Controlled by Using on Screen Display Names and Functions Standard Connection Connector Pin AssignmentsConnection White Balance OperationAutomatic White Balance Manual White Balance Outline Result displayed Meaning Gain Shutter speed mode is E.TRG modeShading Correction OFF Using the Menues Mode Setting by on Screen DisplayPower on Disp Partial scanning setting Changing each setting in Manu modeMenus Shutter Electronic shutter Changing the shutter speed setting Changing each setting in SS synchro. scan modeMode = SS Changing each setting in 1P SNR mode Changing each setting in E.TRG modeChanging the polarity of inputting trigger pulse setting Changing 1P SNR exposure time setting Changing 1P SR exposure time setting Changing each setting in 1P SR modeMode = E.TRG E.TRG = 1P SR Mode = E.TRG E.TRG = PW SNR Changing each setting in PW SNR mode Mode = E.TRG E.TRG = PW SR Changing each setting in PW SR mode Mode = E.TRG E.TRG = RR Changing each setting in RR modeChanging each setting in Gain Changing the gain in Manu mode WHT BAL White balance Changing master pedestal Changing shading correction modeChanging R pedestal Changing B pedestal Sync Adjusting horizontal phaseOption Changing RGB Sync External sync signal input conditions Setting to factory setting statusShutter mode HD input VD input External Sync Using the unit with external sync signal Setting by the frameSetting by 1H Synchro. Scan Operatin EXT Trig External trigger 1P SNR 1 Pulse Trigger Sync Non Reset VD OUT*3 Video Index VD OUT 1P SR 1 Pulse Trigger Sync Reset1 Pulse Trigger SYNC-RESET Picture Output Timing PW SNR Pulse width trigger SYNC-NON Reset VD OUT Video Index VD OUT*3 PW SR Pulse width trigger SYNC-RESET1 Pulse Width Trigger SYNC-RESET Picture Output Timing Input Timing Chart Example RR Reset restartLong Term Exposure Video OUT Video Index Partial Scanning When Partial Scanning Mode is onPartial Scanning OFF All pixels scanning Partial Scanning on Input Output Signal Specificatoins Horizontal Output Waveform Timing Chart CCD Output Waveform Timing ChartVertical Output Waveform Timing Chart CCD HD, VD, Index SpecificationsRGB, 3CCD Symptom Items to be checked External Appearance DiagramBefore Making a Service Call Imaging Systems Division Limited One 1 Year Warranty of Labor and PartsStep-by-step Procedures How to Obtain Warranty Service

Toshiba IK-TF7 instruction manual PW SR Pulse width trigger SYNC-RESET, VD OUT*3

Models: IK-TF7

( 4 ) PW SR (Pulse width trigger SYNC-RESET)

(4. 1) 1 Pulse Width Trigger SYNC-RESET Picture Output Timing

VD OUT*3