VD OUT Video Index | Toshiba IK-TF7 specs

(3. 2) Pulse Width Trigger SYNC-NON RESET Picture Output Timing (at Time of Internal Sync)

Negative polarity mode

Trigger*1

Positive polarity mode

About 1 ∝ s

About 7 ∝ s

Exposure period*2

Exposure period*2

VD OUT*3

VIDEO INDEX

Video output

796H

(Partial scanning OFF)

387H

(Partial scanning 60fps)

258H

(Partial scanning 90fps)

*1:

Externally input signal

*2:

Exposure time = Trigger pulse width + 6 ∝ s

(Valid trigger pulse width is 2 ∝ s or greater for external trigger shutter operation.)

*3: As long as there is no external sync input, the internal VD will be output when SJ01 is set to HD/VD output position.

*4: Video is output at the falling edge of the internal VD following completion of the exposure period. The video and the VIDEO INDEX have a paired relationship.

Note:

When the next trigger is input before completion of the output of the video corresponding to the trig- ger, there will be an effect on the video.

28

IK-TF7(E)

Page 28

2004.03.24, 0:59 PMAdobe PageMaker 6.5J/PPC

Image 28

Toshiba IK-TF7 instruction manual VD OUT Video Index

Contents

IK-TF7 For Customer Use Safety Precautions Disclaimer Table of Contents Components Items Controlled by Using on Screen Display Available selectins Names and Functions Connection Connector Pin AssignmentsStandard Connection Operation White BalanceAutomatic White Balance Manual White Balance Outline Result displayed Meaning Shutter speed mode is E.TRG mode GainShading Correction OFF Mode Setting by on Screen Display Using the MenuesPower on Disp Changing each setting in Manu mode Partial scanning settingMenus Shutter Electronic shutter Mode = SS Changing each setting in SS synchro. scan modeChanging the shutter speed setting Changing each setting in E.TRG mode Changing each setting in 1P SNR modeChanging the polarity of inputting trigger pulse setting Changing 1P SNR exposure time setting Mode = E.TRG E.TRG = 1P SR Changing each setting in 1P SR modeChanging 1P SR exposure time setting Changing each setting in PW SNR mode Mode = E.TRG E.TRG = PW SNR Changing each setting in PW SR mode Mode = E.TRG E.TRG = PW SR Changing each setting in RR mode Mode = E.TRG E.TRG = RRChanging each setting in Gain Changing the gain in Manu mode WHT BAL White balance Changing shading correction mode Changing master pedestalChanging R pedestal Changing B pedestal Adjusting horizontal phase SyncOption Changing RGB Sync Setting to factory setting status External sync signal input conditionsShutter mode HD input VD input External Sync Setting by the frame Using the unit with external sync signalSetting by 1H Synchro. Scan Operatin 1P SNR 1 Pulse Trigger Sync Non Reset EXT Trig External trigger VD OUT*3 Video Index 1 Pulse Trigger SYNC-RESET Picture Output Timing 1P SR 1 Pulse Trigger Sync ResetVD OUT PW SNR Pulse width trigger SYNC-NON Reset VD OUT Video Index 1 Pulse Width Trigger SYNC-RESET Picture Output Timing PW SR Pulse width trigger SYNC-RESETVD OUT*3 RR Reset restart Input Timing Chart ExampleLong Term Exposure Video OUT Video Index When Partial Scanning Mode is on Partial ScanningPartial Scanning OFF All pixels scanning Partial Scanning on Input Output Signal Specificatoins CCD Output Waveform Timing Chart Horizontal Output Waveform Timing ChartVertical Output Waveform Timing Chart CCD RGB, 3CCD SpecificationsHD, VD, Index Before Making a Service Call External Appearance DiagramSymptom Items to be checked Step-by-step Procedures How to Obtain Warranty Service Limited One 1 Year Warranty of Labor and PartsImaging Systems Division