Names and Functions | Toshiba IK-TF7 specification

4. NAMES AND FUNCTIONS

1 Prism faceplate

8DC IN 12V terminal

2DISP button

4MENU UP button

(AWB)

DISP

MENU DATA

DC IN 12V

PAGE

RGB

6DATA UP (AWB) button

7DATA DOWN button

		5 MENU DOWN button
	3 PAGE button	9 RGB terminal
[ Front ]	[ Rear ]
1 Prism faceplate	The protection cap is attached on the lens mount portion. After removing the cap,
	mount the lens. Be careful not to scratch or touch the optical area.
2 DISP button	Used when switching the display.
3 PAGE button	Used when switching to the menu and when selecting the menus.
4 MENU UP button	Select the function to be confirmed or changed on the menu.
5 MENU DOWN button	Select the function to be confirmed or changed on the menu.
6 DATA UP (AWB) button	Changes the value of the function selected by the MENU (UP/DOWN) button. (Also
	used when using AWB.)
7 DATA DOWN button	Changes the value of the function selected by the MENU (UP/DOWN) button.
8 DC IN 12V terminal	Accept a DC power input (12V).
9 RGB terminal	Used as the connector terminal for RGB output, and SYNC output.
	HD and VD signals are input/output. When the random trigger operation is used,
	the trigger signal is input and the index signal is output. This terminal also includes
	an RS232C format control.

7

IK-TF7(E)

Page 7

2004.03.24, 0:59 PMAdobe PageMaker 6.5J/PPC

Image 7

Toshiba IK-TF7 instruction manual Names and Functions

Contents

For Customer Use IK-TF7 Safety Precautions Disclaimer Table of Contents Components Available selectins Items Controlled by Using on Screen Display Names and Functions Connection Connector Pin AssignmentsStandard Connection Result displayed Meaning OperationWhite Balance Automatic White Balance Manual White Balance Outline OFF Shutter speed mode is E.TRG modeGain Shading Correction Disp Mode Setting by on Screen DisplayUsing the Menues Power on Shutter Electronic shutter Changing each setting in Manu modePartial scanning setting Menus Mode = SS Changing each setting in SS synchro. scan modeChanging the shutter speed setting Changing 1P SNR exposure time setting Changing each setting in E.TRG modeChanging each setting in 1P SNR mode Changing the polarity of inputting trigger pulse setting Mode = E.TRG E.TRG = 1P SR Changing each setting in 1P SR modeChanging 1P SR exposure time setting Mode = E.TRG E.TRG = PW SNR Changing each setting in PW SNR mode Mode = E.TRG E.TRG = PW SR Changing each setting in PW SR mode Changing the gain in Manu mode Changing each setting in RR modeMode = E.TRG E.TRG = RR Changing each setting in Gain WHT BAL White balance Changing B pedestal Changing shading correction modeChanging master pedestal Changing R pedestal Changing RGB Sync Adjusting horizontal phaseSync Option External Sync Setting to factory setting statusExternal sync signal input conditions Shutter mode HD input VD input Synchro. Scan Operatin Setting by the frameUsing the unit with external sync signal Setting by 1H EXT Trig External trigger 1P SNR 1 Pulse Trigger Sync Non Reset VD OUT*3 Video Index 1 Pulse Trigger SYNC-RESET Picture Output Timing 1P SR 1 Pulse Trigger Sync ResetVD OUT PW SNR Pulse width trigger SYNC-NON Reset VD OUT Video Index 1 Pulse Width Trigger SYNC-RESET Picture Output Timing PW SR Pulse width trigger SYNC-RESETVD OUT*3 Video OUT Video Index RR Reset restartInput Timing Chart Example Long Term Exposure Partial Scanning on When Partial Scanning Mode is onPartial Scanning Partial Scanning OFF All pixels scanning Input Output Signal Specificatoins CCD CCD Output Waveform Timing ChartHorizontal Output Waveform Timing Chart Vertical Output Waveform Timing Chart RGB, 3CCD SpecificationsHD, VD, Index Before Making a Service Call External Appearance DiagramSymptom Items to be checked Step-by-step Procedures How to Obtain Warranty Service Limited One 1 Year Warranty of Labor and PartsImaging Systems Division