Partial Scanning on | Toshiba IK-TF7 instruction

7. 6 Partial Scanning

( 1 ) Partial Scanning OFF (All pixels scanning)

In this mode, all pixels independent signal from the VIDEO OUT connector is output with increased flame rate.

External HD/VD sync is permitted.

Frame image

1/29.2s (796H)

( 2 ) Partial Scanning ON

In this mode, the pixel signal of the vertical center portion from the VIDEO OUT connector is output.

External HD/VD sync is permitted.

1/60s (387H):when 60fps is selected 1/90s (258H):when 90fps is selected

�

( 3 ) When Partial Scanning Mode is ON

Video output

Blanking interval	Video interval	Blanking interval
B	C	D

Total

Video period C

Mode	Total A	Blanking interval B	Video interval C	Blanking interval D

60fps	387	35	322	30

90fps	258	44	175	39

IK-TF7(E)

Page 31

2004.03.24, 0:59 PMAdobe PageMaker 6.5J/PPC

Page 31

Image 31

Toshiba IK-TF7 Partial Scanning OFF All pixels scanning, Partial Scanning on, When Partial Scanning Mode is on

Contents

For Customer Use IK-TF7 Safety Precautions Disclaimer Table of Contents Components Available selectins Items Controlled by Using on Screen Display Names and Functions Connection Connector Pin AssignmentsStandard Connection Result displayed Meaning OperationWhite Balance Automatic White Balance Manual White Balance Outline OFF Shutter speed mode is E.TRG modeGain Shading Correction Disp Mode Setting by on Screen DisplayUsing the Menues Power on Shutter Electronic shutter Changing each setting in Manu modePartial scanning setting Menus Mode = SS Changing each setting in SS synchro. scan modeChanging the shutter speed setting Changing 1P SNR exposure time setting Changing each setting in E.TRG modeChanging each setting in 1P SNR mode Changing the polarity of inputting trigger pulse setting Mode = E.TRG E.TRG = 1P SR Changing each setting in 1P SR modeChanging 1P SR exposure time setting Mode = E.TRG E.TRG = PW SNR Changing each setting in PW SNR mode Mode = E.TRG E.TRG = PW SR Changing each setting in PW SR mode Changing the gain in Manu mode Changing each setting in RR modeMode = E.TRG E.TRG = RR Changing each setting in Gain WHT BAL White balance Changing B pedestal Changing shading correction modeChanging master pedestal Changing R pedestal Changing RGB Sync Adjusting horizontal phaseSync Option External Sync Setting to factory setting statusExternal sync signal input conditions Shutter mode HD input VD input Synchro. Scan Operatin Setting by the frameUsing the unit with external sync signal Setting by 1H EXT Trig External trigger 1P SNR 1 Pulse Trigger Sync Non Reset VD OUT*3 Video Index 1 Pulse Trigger SYNC-RESET Picture Output Timing 1P SR 1 Pulse Trigger Sync ResetVD OUT PW SNR Pulse width trigger SYNC-NON Reset VD OUT Video Index 1 Pulse Width Trigger SYNC-RESET Picture Output Timing PW SR Pulse width trigger SYNC-RESETVD OUT*3 Video OUT Video Index RR Reset restartInput Timing Chart Example Long Term Exposure Partial Scanning on When Partial Scanning Mode is onPartial Scanning Partial Scanning OFF All pixels scanning Input Output Signal Specificatoins CCD CCD Output Waveform Timing ChartHorizontal Output Waveform Timing Chart Vertical Output Waveform Timing Chart RGB, 3CCD SpecificationsHD, VD, Index Before Making a Service Call External Appearance DiagramSymptom Items to be checked Step-by-step Procedures How to Obtain Warranty Service Limited One 1 Year Warranty of Labor and PartsImaging Systems Division