Changing each setting in PW SR mode | Toshiba IK-TF7 specification

(1. 3. 4) Changing each setting in PW SR mode

Move up down					Set by pushing
By pushing					Set by pushing
By pushing					DATA UP, DOWN
MENU UP, DOWN					DATA UP, DOWN
MENU UP, DOWN

-- SHUTTER --
MODE	E.TRG
E.TRG	PW SR
TRG.P
TRG.P
PART	OFF

•Shutter mode MANU, SS, E.TRG

•E.TRG mode

1P SNR, 1P SR, PW SNR, PW SR, RR

• Input trigger pulse setting at PW SNR and PW SR

Input trigger pulse : positive polarity Input trigger pulse : negative polarity

• Partial scanning switch OFF/60fps/90fps

<MODE = E.TRG E.TRG = PW SR>

(a) Changing the polarity of inputting trigger pulse setting

1Set the "→ " to TRG.P by pushing [MENU UP], [MENU DOWN] buttons.

2Select either , by pushing [DATA UP], [DATA DOWN] buttons.

Note:

The longer the storage time with extended exposures, the more visible certain characteristics of CCD cameras become: fixed pattern noise, white pixels, etc.

IK-TF7(E)

Page 17

2004.03.24, 0:59 PMAdobe PageMaker 6.5J/PPC

Page 17

Image 17

Toshiba IK-TF7 instruction manual Changing each setting in PW SR mode, Mode = E.TRG E.TRG = PW SR

Contents

For Customer Use IK-TF7 Safety Precautions Disclaimer Table of Contents Components Available selectins Items Controlled by Using on Screen Display Names and Functions Standard Connection Connector Pin AssignmentsConnection White Balance OperationAutomatic White Balance Manual White Balance Outline Result displayed Meaning Gain Shutter speed mode is E.TRG modeShading Correction OFF Using the Menues Mode Setting by on Screen DisplayPower on Disp Partial scanning setting Changing each setting in Manu modeMenus Shutter Electronic shutter Changing the shutter speed setting Changing each setting in SS synchro. scan modeMode = SS Changing each setting in 1P SNR mode Changing each setting in E.TRG modeChanging the polarity of inputting trigger pulse setting Changing 1P SNR exposure time setting Changing 1P SR exposure time setting Changing each setting in 1P SR modeMode = E.TRG E.TRG = 1P SR Mode = E.TRG E.TRG = PW SNR Changing each setting in PW SNR mode Mode = E.TRG E.TRG = PW SR Changing each setting in PW SR mode Mode = E.TRG E.TRG = RR Changing each setting in RR modeChanging each setting in Gain Changing the gain in Manu mode WHT BAL White balance Changing master pedestal Changing shading correction modeChanging R pedestal Changing B pedestal Sync Adjusting horizontal phaseOption Changing RGB Sync External sync signal input conditions Setting to factory setting statusShutter mode HD input VD input External Sync Using the unit with external sync signal Setting by the frameSetting by 1H Synchro. Scan Operatin EXT Trig External trigger 1P SNR 1 Pulse Trigger Sync Non Reset VD OUT*3 Video Index VD OUT 1P SR 1 Pulse Trigger Sync Reset1 Pulse Trigger SYNC-RESET Picture Output Timing PW SNR Pulse width trigger SYNC-NON Reset VD OUT Video Index VD OUT*3 PW SR Pulse width trigger SYNC-RESET1 Pulse Width Trigger SYNC-RESET Picture Output Timing Input Timing Chart Example RR Reset restartLong Term Exposure Video OUT Video Index Partial Scanning When Partial Scanning Mode is onPartial Scanning OFF All pixels scanning Partial Scanning on Input Output Signal Specificatoins Horizontal Output Waveform Timing Chart CCD Output Waveform Timing ChartVertical Output Waveform Timing Chart CCD HD, VD, Index SpecificationsRGB, 3CCD Symptom Items to be checked External Appearance DiagramBefore Making a Service Call Imaging Systems Division Limited One 1 Year Warranty of Labor and PartsStep-by-step Procedures How to Obtain Warranty Service

(1. 3. 4) Changing each setting in PW SR mode

MODE

E.TRG

PW SR

TRG.P

PART

OFF

1P SNR, 1P SR, PW SNR, PW SR, RR

<MODE = E.TRG E.TRG = PW SR>

(a) Changing the polarity of inputting trigger pulse setting