OPERATION

J

K

L

FIG. 17

TO USE CRUISE CONTROL -J (See Fig. 17)

The cruise control feature can be used for forward travel only.

SYSTEM CHARACTERISTICS

The cruise control should only be used while mowing or transporting on relatively smooth, straight surfaces. Other conditions such as trimming at slow speeds may cause the cruise control to disengage. Do not use the cruise control on slopes, rough terrian or while trimmimg or turning.

With forward drive pedal depressed to desired speed, pull cruise control lever (J) up and hold while lifting your foot off the pedal, then release the lever.

To disengage the cruise control, depress the brake pedal or tap on forward drive pedal.

TO ADJUST MOWER CUTTING HEIGHT (See Fig. 18)

The position of the attachment lift lever (A) determines the cutting height.

The average lawn should be cut to approximately 2-1/2 inches during the cool season and to over 3 inches during hot months. For healthier and better looking lawns, mow often and after moderate growth.

For best cutting performance, grass over 6 inches in height should be mowed twice. Make the first cut relatively high; the second to desired height.

TO ADJUST GAUGE WHEELS (See Fig. 19)

Gauge wheels are properly adjusted when they are slightly off the ground when mower is at the desired cutting height in operating position. Gauge wheels then keep the deck in proper position to help prevent scalping in most terrain conditions.

NOTE: Adjust gauge wheels with tractor on a flat level surface.

Adjust mower to desired cutting height (See “TO AD- JUST MOWER CUTTING HEIGHT” in this section of manual).

With mower in desired height of cut position, gauge wheels should be assembled so they are slightly off the ground. Install gauge wheel in appropriate hole. Tighten securely.

Repeat for all, installing gauge wheel in same adjust- ment hole.

A

FIG. 18

Put attachment lift lever in desired cutting height slot.

Slide pointer tab (T) to desired cutting height as a reminder for next time you mow.

The cutting height range is approximately 1" to 4". The heights are measured from the ground to the blade tip with the engine not running. These heights are approximate and may vary depending upon soil conditions, height of grass and types of grass being mowed.

FIG.19

TO OPERATE MOWER

Your tractor is equipped with an operator presence sensing switch. Any attempt by the operator to leave the seat with the engine running and the attachment clutch engaged will shut off the engine. You must remain fully and centrally positioned in the seat to prevent the engine from hesitating or cutting off when operating your equipment on rough, rolling terrain or hills.

1.Select desired height of cut with attachment lift lever.

2.Start mower blades by engaging attachment clutch control.

TO STOP MOWER BLADES - disengage attachment clutch control.

CAUTION: Do not operate the mower without either the entire grass catcher, on mowers so equipped, or the deflector shield (S) in place.

13

Page 13
Image 13
Poulan PBGT26H54 To USE Cruise Control -J See Fig, To Adjust Mower Cutting Height See Fig, To Adjust Gauge Wheels See Fig

PBGT26H54 specifications

The Poulan PBGT26H54 is a versatile, robust lawn tractor designed for homeowners seeking a reliable solution for lawn care. This model is particularly appreciated for its blend of power and efficiency, boasting a powerful engine that ensures optimal performance in various mowing conditions.

One of the standout features of the PBGT26H54 is its 26 horsepower Briggs & Stratton engine. This engine is engineered for durability and efficiency, providing enough strength to tackle thick grass and uneven terrain without compromising on performance. The engine is paired with a hydrostatic transmission, which allows for smooth speed adjustments, enabling users to navigate their lawns seamlessly.

The cutting deck on the PBGT26H54 measures 54 inches in width, making it suitable for mowing larger areas in less time. Its design includes a heavy-duty steel structure that ensures durability while maintaining a lightweight feel for ease of maneuverability. The deck also features a cutting height adjustment system, allowing users to select the desired grass length with precision, enhancing the overall lawn appearance.

In terms of technological advancements, the PBGT26H54 is equipped with an integrated mulching capability, which allows grass clippings to be finely shredded and returned to the soil as natural fertilizer. This feature not only promotes a healthier lawn but also reduces the need for bagging and disposal of clippings. Additionally, the tractor’s design includes a side discharge option, providing flexibility based on user preference and lawn needs.

The Poulan PBGT26H54 prioritizes user comfort and convenience. It features an ergonomic seat designed for prolonged use, equipped with armrests to reduce fatigue during extended mowing sessions. The instrument panel is well-organized, allowing for easy gauge visibility and accessible controls, ensuring users can operate the tractor without hassle.

Another essential characteristic of the PBGT26H54 is its durable construction. The robust chassis is built to withstand the rigors of lawn care, providing stability and reliability over time. This model also includes a range of accessories, such as tow-behind carts and implements, which enhance its versatility for various yard tasks beyond just mowing.

In summary, the Poulan PBGT26H54 lawn tractor is a well-rounded machine ideal for homeowners desiring efficiency, comfort, and durability in their lawn maintenance equipment. Its powerful engine, spacious cutting deck, and thoughtful design make it a solid choice for tackling the demands of any lawn care project.