CUSTOMER RESPONSIBILITIES

TRACTOR

Always observe safety rules when performing any mainte- nance.

BRAKE OPERATION

If tractor requires more than six (6) feet stopping distance at high speed in highest gear, then brake must be adjusted. (See “TO ADJUST BRAKE” in the Service and Adjustments section of this manual).

TIRES

•Maintain proper air pressure in all tires (See “PRODUCT SPECIFICATIONS” section of this manual).

•Keep tires free of gasoline, oil, or insect control chemi- cals which can harm rubber.

•Avoid stumps, stones, deep ruts, sharp objects and other hazards that may cause tire damage.

NOTE: To seal tire punctures and prevent flat tires due to slow leaks, tire sealant may be purchased from your local parts dealer. Tire sealant also prevents tire dry rot and corrosion.

OPERATOR PRESENCE SYSTEM

Be sure operator presence and interlock systems are work- ing properly. If your tractor does not function as described, repair the problem immediately.

•The engine should not start unless the brake pedal is fully depressed and attachement clutch control is in the disengaged position.

•When the engine is running, any attempt by the operator to leave the seat without first setting the parking brake should shut off the engine.

•When the engine is running and the attachment clutch is engaged, any attempt by the operator to leave the seat should shut off the engine.

•The attachment clutch should never operate unless the operator is in the seat.

BLADE CARE

For best results mower blades must be kept sharp. Replace bent or damaged blades.

BLADE REMOVAL (See Fig. 9)

•Raise mower to highest position to allow access to blades.

•Remove hex bolt, lock washer and flat washer securing blade.

•Install new or resharpened blade with trailing edge up towards deck as shown.

IMPORTANT: TO ENSURE PROPER ASSEMBLY, CENTER HOLE IN BLADE MUST ALIGN WITH STAR ON MANDREL ASSEMBLY.

•Reassemble hex bolt, lock washer and flat washer in exact order as shown.

•Tighten bolt securely (27-35 Ft. Lbs. torque).

IMPORTANT: BLADE BOLT IS GRADE 8 HEAT TREATED.

TRAILING

MANDREL

ASSEMBLY

EDGE UP

 

 

CENTER

 

HOLE

LOCK WASHER

STAR

BLADE

FLAT WASHER

HEX BOLT (GRADE 8)*

*A GRADE 8 HEAT TREATED BOLT CAN BE IDENTIFIED BY SIX LINES ON THE BOLT HEAD.

FIG. 9

TO SHARPEN BLADE (See Fig. 10)

NOTE: We do not recommend sharpening blade - but if you do, be sure the blade is balanced.

Care should be taken to keep the blade balanced. An unbalanced blade will cause excessive vibration and even- tual damage to mower and engine.

•The blade can be sharpened with a file or on a grinding wheel. Do not attempt to sharpen while on the mower.

•To check blade balance, you will need a 5/8" diameter steel bolt, pin, or a cone balancer. (When using a cone balancer, follow the instructions supplied with balancer).

NOTE: Do not use a nail for balancing blade. The lobes of the center hole may appear to be centered, but are not.

•Slide blade on to an unthreaded portion of the steel bolt or pin and hold the bolt or pin parallel with the ground. If blade is balanced, it should remain in a horizontal position. If either end of the blade moves downward, sharpen the heavy end until the blade is balanced.

CENTER HOLE

5/8" BOLT

BLADE

OR PIN

 

FIG. 10

15

Page 14 Page 16
Page 15
Image 15
Poulan PC14542D owner manual Tractor, Brake Operation, Tires, Operator Presence System, Blade Care
Page 14 Page 16

PC14542D specifications

The Poulan PC14542D is a robust and reliable lawn tractor designed for homeowners who need a powerful and efficient machine for maintaining their lawns. With its 14.5 horsepower Briggs & Stratton engine, this tractor is well-equipped to handle a variety of mowing tasks, making it a versatile choice for users of all experience levels.

One of the standout features of the PC14542D is its 42-inch cutting deck, which allows users to cover a larger area in less time. The deck is constructed with strengthened steel, ensuring durability and a consistent cut quality. The mower deck is adjustable, providing users with the capability to set cutting heights from 1 to 4 inches. This versatility makes it easier to adapt to different grass types and growing conditions.

The Poulan PC14542D features a foot-controlled hydrostatic transmission, offering a seamless and effortless driving experience. This technology enables smooth speed changes, which is particularly beneficial when navigating around obstacles or changing terrain at a moment's notice. The hydrostatic system eliminates the need for manual gear shifts, making this tractor user-friendly, especially for beginners.

Additionally, the PC14542D is equipped with a comfortable, adjustable seat that provides excellent back support during extended periods of mowing. The ergonomic design of the tractor also ensures that users can easily access all controls without straining, enhancing overall comfort and convenience.

Another notable characteristic is the easy-access maintenance points, designed for quick and straightforward upkeep. The tractor has a durable and reliable build, with protective features such as a front bumper that safeguards against potential impacts.

This model also prides itself on its excellent maneuverability, thanks to its compact size and a tight turning radius. This makes it easier to navigate around flower beds, trees, and other obstacles in your yard, enhancing overall mowing efficiency.

The Poulan PC14542D combines power, comfort, and ease of use, making it an ideal choice for homeowners seeking to maintain a lush and healthy lawn. Whether tackling large areas or simply giving the yard a quick trim, this lawn tractor proves to be a dependable companion for all mowing needs. With its blend of features and technologies, the PC14542D stands out as an excellent investment for lawn care enthusiasts.
Top Page Image Contents