OPERATION

TO OPERATE MOWER (See Fig. 6)

Your tractor is equipped with an operator presence sensing switch. Any attempt by the operator to leave the seat with the engine running and the attachment clutch engaged will shut off the engine.

Select desired height of cut.

Start mower blades by engaging attachment clutch control.

TO STOP MOWER BLADES - disengage attachment clutch control.

CAUTION: Do not operate the mower without either the entire grass catcher, on mowers so equipped, or the deflector shield in place.

"ENGAGED" POSITION

ATTACHMENT LIFT

LEVER HIGH POSITION

LOW

POSITION

ATTACHMENT CLUTCH LEVER "DISENGAGED" POSITION

DEFLECTOR

SHIELD

FIG. 6

TO TRANSPORT

Raise attachment lift to highest position with attachment lift control.

When pushing or towing your tractor, be sure gearshift lever is in neutral (N) position.

Do not push or tow tractor at more than five (5) MPH.

NOTE: To protect hood from damage when transporting your tractor on a truck or a trailer, be sure hood is closed and secured to tractor. Use an appropriate means of tying hood to tractor (rope, cord, etc.).

TOWING CARTS AND OTHER ATTACH- MENTS

Tow only the attachments that are recommended by and comply with specifications of the manufacturer of your tractor. Use common sense when towing. Too heavy of a load, while on a slope, is dangerous. Tires can lose traction with the ground and cause you to lose control of your tractor.

BEFORE STARTING THE ENGINE

CHECK ENGINE OIL LEVEL

The engine in your tractor has been shipped, from the factory, already filled with summer weight oil.

Check engine oil with tractor on level ground.

Remove oil fill cap/dipstick and wipe clean, reinsert the dipstick and screw cap tight, wait for a few seconds, remove and read oil level. If necessary, add oil until “FULL” mark on dipstick is reached. Do not overfill.

For cold weather operation you should change oil for easier starting (See “OIL VISCOSITY CHART” in the Customer Responsibilities section of this manual).

To change engine oil, see the Customer Responsibilities section in this manual.

TO OPERATE ON HILLS

CAUTION: Do not drive up or down hills with slopes greater than 15° and do not drive across any slope.

• Choose the slowest speed before starting up or down hills.

• Avoid stopping or changing speed on hills.

• If slowing is necessary, move throttle control lever to slower position.

• If stopping is absolutely necessary, push clutch/brake pedal quickly to brake position and engage parking brake.

• Move gearshift lever to 1st gear. Be sure you have allowed room for tractor to roll slightly as you restart movement.

• To restart movement, slowly release parking brake and clutch/brake pedal.

• Make all turns slowly.

12

Page 12
Image 12
Poulan PC1538A Before Starting the Engine, To Transport, Towing Carts and Other ATTACH- Ments, Check Engine OIL Level

PC1538A specifications

The Poulan PC1538A is a versatile and reliable gas-powered chainsaw designed for homeowners and outdoor enthusiasts looking to tackle a variety of cutting tasks. With a focus on user-friendliness and efficient performance, this model stands out for its robust features and innovative technologies.

One of the primary characteristics of the PC1538A is its powerful 38cc two-stroke engine. This engine provides a balance of power and economy, enabling users to handle everything from light pruning to larger cutting jobs with ease. The engine is designed for optimal fuel efficiency while maintaining a solid power output, ensuring that users can work longer without frequent refueling.

The 15-inch bar and chain setup of the PC1538A is ideal for making quick cuts in relatively small to medium-sized wood, making it a perfect choice for backyard projects, cutting firewood, and managing fallen branches. The chainsaw's low-kickback chain further enhances safety for the user, allowing for more controlled cuts without the risk of unintended recoil.

Ergonomic design is another hallmark of the Poulan PC1538A, featuring a lightweight frame that is easy to maneuver. The comfortable grip handle reduces vibration, making prolonged use more tolerable and less strenuous on the hands and arms. This thoughtful design consideration allows users to maintain better control over the tool, leading to more precise cutting.

In terms of maintenance, Poulan has integrated several user-friendly features into the PC1538A. The tool-less chain tensioning system allows for quick adjustments to the chain tension, ensuring optimal performance without the need for additional tools. An easy-access air filter simplifies routine maintenance, enabling users to keep the engine running smoothly with minimal effort.

Additionally, the chainsaw incorporates technologies such as a primer bulb to facilitate easier starts, especially after long periods of inactivity. The automatic oiler system ensures proper lubrication of the chain and bar during operation, extending the life of the accessory components and maintaining cutting efficiency.

Overall, the Poulan PC1538A combines its powerful engine, ergonomic design, and thoughtful features to provide a reliable tool for a range of cutting tasks. Whether you are a novice or an experienced user, this chainsaw offers performance and efficiency, making it an excellent addition to any outdoor toolkit.