SAFETY RULES

SAFE OPERATION PRACTICES FOR RIDE-ON MOWERS

IMPORTANT: THIS CUTTING MACHINE IS CAPABLE OF AMPUTATING HANDS AND FEET AND THROWING OBJECTS. FAILURE TO OBSERVE THE FOLLOWING SAFETY INSTRUCTIONS COULD RESULT IN SERIOUS INJURY OR DEATH.

I. GENERAL OPERATION

Read,understand,andfollowallinstructionsinthemanual and on the machine before starting.

Only allow responsible adults, who are familiar with the instructions, to operate the machine.

Clear the area of objects such as rocks, toys, wire, etc., which could be picked up and thrown by the blade.

Be sure the area is clear of other people before mowing. Stop machine if anyone enters the area.

Never carry passengers.

Do not mow in reverse unless absolutely necessary. Always look down and behind before and while backing.

Beawareofthemowerdischargedirectionanddonotpoint it at anyone. Do not operate the mower without either the entire grass catcher or the guard in place.

Slow down before turning.

Never leave a running machine unattended. Always turn off blades, set parking brake, stop engine, and remove keys before dismounting.

Turn off blades when not mowing.

Stop engine before removing grass catcher or unclogging chute.

Mow only in daylight or good artificial light.

Do not operate the machine while under the influence of alcohol or drugs.

Watch for traffic when operating near or crossing road- ways.

Useextracarewhenloadingorunloadingthemachineinto a trailer or truck.

Dataindicatesthatoperators,age60yearsandabove,are involved in a large percentage of riding mower-related injuries. These operators should evaluate their ability to operate the riding mower safely enough to protect them- selves and others from serious injury.

Keep machine free of grass , leaves or other debris build- up which can touch hot exhaust / engine parts and burn. Do not allow the mower deck to plow leaves or other debris which can cause build-up to occur. Clean any oil or fuel spillage before operating or storing the machine. Allow machine to cool before storage.

II. SLOPE OPERATION

Slopes are a major factor related to loss-of-control and tipover accidents, which can result in severe injury or death. All slopes require extra caution. If you cannot back up the slope or if you feel uneasy on it, do not mow it.

DO:

Mow up and down slopes, not across.

Remove obstacles such as rocks, tree limbs, etc.

Watch for holes, ruts, or bumps. Uneven terrain could overturn the machine. Tall grass can hide obstacles.

Use slow speed. Choose a low gear so that you will not have to stop or shift while on the slope.

Follow the manufacturer’s recommendations for wheel weights or counterweights to improve stability.

Use extra care with grass catchers or other attachments. These can change the stability of the machine.

Keep all movement on the slopes slow and gradual. Do not make sudden changes in speed or direction.

Avoid starting or stopping on a slope. If tires lose traction, disengage the blades and proceed slowly straight down the slope.

DO NOT:

Do not turn on slopes unless necessary, and then, turn slowly and gradually downhill, if possible.

Do not mow near drop-offs, ditches, or embankments. The mower could suddenly turn over if a wheel is over the edge of a cliff or ditch, or if an edge caves in.

Do not mow on wet grass. Reduced traction could cause sliding.

Do not try to stabilize the machine by putting your foot on the ground.

Do not use grass catcher on steep slopes.

III. CHILDREN

Tragic accidents can occur if the operator is not alert to the presence of children. Children are often attracted to the machine and the mowing activity. Never assume that children will remain where you last saw them.

Keep children out of the mowing area and under the watchful care of another responsible adult.

Be alert and turn machine off if children enter the area.

Before and when backing, look behind and down for small children.

Never carry children. They may fall off and be seriously injured or interfere with safe machine operation.

Never allow children to operate the machine.

Use extra care when approaching blind corners, shrubs, trees, or other objects that may obscure vision.

IV. SERVICE

Use extra care in handling gasoline and other fuels. They are flammable and vapors are explosive.

-Use only an approved container.

-Never remove gas cap or add fuel with the engine running. Allow engine to cool before refueling. Do not smoke.

-Never refuel the machine indoors.

-Never store the machine or fuel container inside where there is an open flame, such as a water heater.

Never run a machine inside a closed area.

Keep nuts and bolts, especially blade attachment bolts, tight and keep equipment in good condition.

Never tamper with safety devices. Check their proper operationregularly.

Keep machine free of grass, leaves, or other debris build- up. Clean oil or fuel spillage. Allow machine to cool before storing.

Stop and inspect the equipment if you strike an object. Repair, if necessary, before restarting.

Never make adjustments or repairs with the engine running.

Grass catcher components are subject to wear, damage, and deterioration, which could expose moving parts or allow objects to be thrown. Frequently check components and replace with manufacturer's recommended parts, when necessary.

Mower blades are sharp and can cut. Wrap the blade(s) or wear gloves, and use extra caution when servicing them.

Check brake operation frequently. Adjust and service as required.

2

Page 2
Image 2
Poulan PC1538A manual Safety Rules, General Operation, II. Slope Operation, III. Children, IV. Service

PC1538A specifications

The Poulan PC1538A is a versatile and reliable gas-powered chainsaw designed for homeowners and outdoor enthusiasts looking to tackle a variety of cutting tasks. With a focus on user-friendliness and efficient performance, this model stands out for its robust features and innovative technologies.

One of the primary characteristics of the PC1538A is its powerful 38cc two-stroke engine. This engine provides a balance of power and economy, enabling users to handle everything from light pruning to larger cutting jobs with ease. The engine is designed for optimal fuel efficiency while maintaining a solid power output, ensuring that users can work longer without frequent refueling.

The 15-inch bar and chain setup of the PC1538A is ideal for making quick cuts in relatively small to medium-sized wood, making it a perfect choice for backyard projects, cutting firewood, and managing fallen branches. The chainsaw's low-kickback chain further enhances safety for the user, allowing for more controlled cuts without the risk of unintended recoil.

Ergonomic design is another hallmark of the Poulan PC1538A, featuring a lightweight frame that is easy to maneuver. The comfortable grip handle reduces vibration, making prolonged use more tolerable and less strenuous on the hands and arms. This thoughtful design consideration allows users to maintain better control over the tool, leading to more precise cutting.

In terms of maintenance, Poulan has integrated several user-friendly features into the PC1538A. The tool-less chain tensioning system allows for quick adjustments to the chain tension, ensuring optimal performance without the need for additional tools. An easy-access air filter simplifies routine maintenance, enabling users to keep the engine running smoothly with minimal effort.

Additionally, the chainsaw incorporates technologies such as a primer bulb to facilitate easier starts, especially after long periods of inactivity. The automatic oiler system ensures proper lubrication of the chain and bar during operation, extending the life of the accessory components and maintaining cutting efficiency.

Overall, the Poulan PC1538A combines its powerful engine, ergonomic design, and thoughtful features to provide a reliable tool for a range of cutting tasks. Whether you are a novice or an experienced user, this chainsaw offers performance and efficiency, making it an excellent addition to any outdoor toolkit.