OPERATION

TO START ENGINE (See Fig. 5)

When starting the engine for the first time or if the engine has run out of fuel, it will take extra cranking time to move fuel from the tank to the engine.

•Be sure freewheel control is in the transmission engaged position.

•Sit on seat in operating position, depress brake pedal and set parking brake.

•Move attachment clutch to “DISENGAGED” position.

•Move throttle control to fast position

•Pull choke control out for a cold engine start attempt. For a warm engine start attempt the choke control may not be needed.

NOTE: Before starting, read the warm and cold starting procedures below.

•Insert key into ignition and turn key clockwise to “START” position and release key as soon as engine starts. Do not run starter continuously for more than fifteen seconds per minute. If the engine does not start after several attempts, push choke control in, wait a few minutes and try again. If engine still does not start, pull the choke control out and retry.

WARM WEATHER STARTING (50° F and above)

•When engine starts, slowly push choke control in until the engine begins to run smoothly. If the engine starts to run roughly, pull the choke control out slightly for a few seconds and then continue to push the control in slowly.

•The attachments and ground drive can now be used. If the engine does not accept the load, restart the engine and allow it to warm up for one minute using the choke as described above.

COLD WEATHER STARTING (50° F and below)

•When engine starts, slowly push choke control in until the engine begins to run smoothly. Continue to push the choke control in small steps allowing the engine to accept small changes in speed and load, until the choke control is fully in. If the engine starts to run roughly, pull the choke control out slightly for a few seconds and then continue to push the control in slowly. This may require an engine warm-up period from several seconds to several minutes, depending on the temperature.

AUTOMATIC TRANSMISSION WARM UP

•Before driving the unit in cold weather, the transmission should be warmed up as follows:

•Be sure the tractor is on level ground.

•Release the parking brake and let the brake slowly return to operating position.

•Allow one minute for transmission to warm up.This can be done during the engine warm up period.

•The attachments can be used during the engine warm- up period after the transmission has been warmed up and may require the choke control be pulled out slightly.

NOTE: If at a high altitude (above 3000 feet) or in cold temperatures (below 32 F) the carburetor fuel mixture may need to be adjusted for best engine performance. See “TO ADJUST CARBURETOR” in the Service and Adjustments section of this manual.

PURGE TRANSMISSION

CAUTION: Never engage or disengage freewheel lever while the engine is run-

ning.

To ensure proper operation and performance, it is recom- mended that the transmission be purged before operating tractor for the first time. This procedure will remove any trapped air inside the transmission which may have de- veloped during shipping of your tractor.

IMPORTANT: SHOULD YOUR TRANSMISSION REQUIRE REMOVAL FOR SERVICE OR REPLACEMENT, IT SHOULD BE PURGED AFTER REINSTALLATION BEFORE OPERATING THE TRACTOR.

•Place tractor safely on level surface with engine off and parking brake set.

•Disengage transmission by placing freewheel control in freewheeling position (See “TO TRANSPORT” in this section of manual).

•Sitting in the tractor seat, start engine. After the en- gine is running, move throttle control to slow position. Disengage parking brake

•Depress forward drive pedal to full forward position, hold for five (5) seconds and release pedal. Depress reverse drive pedal to full reverse position, hold for five

(5) seconds and release pedal. Repeat this procedure three (3) times.

NOTE: During this procedure there will be no movement of drive wheels. The air is being removed from hydraulic drive system.

•Shut- off engine and set parking brake.

•Engage transmission by placing freewheel control in driving position (See “TO TRANSPORT” in this section of manual).

•Sitting in the tractor seat, start engine. After the engine is running, move throttle control to half (1/2) speed. Disengage parking brake.

•Drive tractor forward for approximately five feet then backwards for five feet. Repeat this driving procedure three times.

•Your tractor is now purged and now ready for normal operation.

14

Page 13 Page 15
Page 14
Image 14
Poulan PD24PH48ST manual To Start Engine See Fig, Purge Transmission, Automatic Transmission Warm UP
Page 13 Page 15

PD24PH48ST specifications

The Poulan PD24PH48ST is a robust and versatile lawn tractor designed to tackle a variety of outdoor tasks with ease and efficiency. This model stands out for its powerful performance, innovative features, and user-friendly design, making it an excellent choice for homeowners looking to maintain their lawns and gardens without hassle.

One of the key features of the Poulan PD24PH48ST is its impressive 24 horsepower engine. This powerful engine delivers the necessary torque and speed to handle even the toughest mowing conditions. The tractor is equipped with a reliable hydrostatic transmission system, which allows for effortless speed control and smooth operation. With no gears to shift, users can simply press the pedal to accelerate or decelerate, making it easy to navigate through tight spaces and maneuver around obstacles.

The Poulan PD24PH48ST boasts a 48-inch cutting deck, which allows for efficient mowing over larger areas. The cutting deck features adjustable cutting heights, enabling users to select the desired grass length for their specific lawn type. This flexibility ensures an even cut and promotes healthy grass growth. Additionally, the deck is designed for easy clean-up, which is essential for maintaining optimal performance over time.

Another notable characteristic of the PD24PH48ST is its comfort-oriented design. The tractor is fitted with a high-back seat, providing essential lumbar support for extended periods of mowing. The easy-to-use dashboard and controls allow operators to adjust settings and monitor performance without taking their eyes off the task at hand. The tractor also features a tight turning radius, which makes it easy to maneuver around flower beds, trees, and other landscaping elements.

The Poulan PD24PH48ST incorporates several advanced technologies to enhance its functionality. The tractor features a durable steel frame for increased stability and lifetime performance. Its rugged tires provide excellent traction on various terrains, allowing users to tackle both flat and hilly landscapes with confidence. The tractor is also compatible with a range of attachments, including snow blowers, baggers, and plows, enhancing its versatility throughout the year.

In summary, the Poulan PD24PH48ST stands out as a reliable and efficient lawn tractor equipped with a powerful engine, a versatile cutting deck, and user-friendly features. Its combination of technology and comfort makes lawn care a breeze, ensuring homeowners can achieve the perfect lawn with minimal effort. This tractor is an excellent investment for anyone serious about maintaining their outdoor spaces.
Top Page Image Contents