STORAGE

Immediately prepare your tractor for storage at the end of the season or if the tractor will not be used for 30 days or more.

WARNING: Never store the tractor with gasoline in the tank inside a building where fumes may reach an open flame or spark. Allow the engine to cool before storing in any enclosure.

TRACTOR

Remove mower from tractor for winter storage. When mower is to be stored for a period of time, clean it thoroughly, remove all dirt, grease, leaves, etc. Store in a clean, dry area.

Clean entire tractor (See “CLEANING” in the Mainte- nance section of this manual).

Inspect and replace belts, if necessary (See belt re- placement instructions in the Service and Adjustments section of this manual).

Lubricate as shown in the Maintenance section of this manual.

Be sure that all nuts, bolts and screws are securely fastened. Inspect moving parts for damage, breakage and wear. Replace if necessary.

Touch up all rusted or chipped paint surfaces; sand lightly before painting.

BATTERY

Fully charge the battery for storage.

After a period of time in storage, battery may require recharging.

To help prevent corrosion and power leakage during long periods of storage, battery cables should be dis- connected and battery cleaned thoroughly (see “TO CLEAN BATTERY AND TERMINALS” in the Mainte- nance section of this manual).

After cleaning, leave cables disconnected and place cables where they cannot come in contact with battery terminals.

If battery is removed from tractor for storage, do not store battery directly on concrete or damp surfaces.

ENGINE

FUEL SYSTEM

IMPORTANT: IT IS IMPORTANTTO PREVENT GUM DEPOSITS FROM FORMING IN ESSENTIAL FUEL SYSTEM PARTS SUCH AS CARBURETOR, FUEL FILTER, FUEL HOSE, OR TANK DURING STORAGE. ALSO, EXPERIENCE INDICATES THAT ALCOHOL BLENDED FUELS (CALLED GASOHOL OR USING ETHANOL OR METHANOL) CAN ATTRACT MOISTUREWHICH LEADSTO SEPARATION AND FORMATION OF ACIDS DURING STORAGE. ACIDIC GAS CAN DAMAGE THE FUEL SYSTEM OF AN ENGINE WHILE IN STORAGE.

Empty the fuel tank by starting the engine and let it run until the fuel lines and carburetor are empty.

Never use engine or carburetor cleaner products in the fuel tank or permanent damage may occur.

Use fresh fuel next season.

NOTE: Fuel stabilizer is an acceptable alternative in mini- mizing the formation of fuel gum deposits during storage. Add stabilizer to gasoline in fuel tank or storage container. Always follow the mix ratio found on stabilizer container. Run engine at least 10 minutes after adding stabilizer to allow the stabilizer to reach the carburetor. Do not empty the gas tank and carburetor if using fuel stabilizer.

ENGINE OIL

Drain oil (with engine warm) and replace with clean en- gine oil. (See “ENGINE” in the Maintenance section of this manual).

CYLINDER(S)

Remove spark plug(s).

Pour one ounce of oil through spark plug hole(s) into cylinder(s).

Turn ignition key to “START” position for a few seconds to distribute oil.

Replace with new spark plug(s).

OTHER

Do not store gasoline from one season to another.

Replace your gasoline can if your can starts to rust. Rust and/or dirt in your gasoline will cause problems.

If possible, store your tractor indoors and cover it to give protection from dust and dirt.

Cover your tractor with a suitable protective cover that does not retain moisture. Do not use plastic. Plastic cannot breathe which allows condensation to form and will cause your tractor to rust.

IMPORTANT: NEVER COVERTRACTOR WHILE ENGINE AND EXHAUST AREAS ARE STILL WARM.

26

Page 26
Image 26
Poulan PD25PH48STA owner manual Storage, Other, Fuel System, Engine OIL, Cylinders

PD25PH48STA specifications

The Poulan PD25PH48STA is a robust and efficient riding lawn mower designed to provide an exceptional mowing experience for homeowners with large yards. This model strikes the perfect balance between power, performance, and user-friendly features, making it a favored choice for both novices and seasoned lawn care enthusiasts.

One of the standout features of the PD25PH48STA is its powerful 25 horsepower Briggs & Stratton engine. This reliable engine ensures that the mower can handle tough grass and varied terrain without compromising performance. The engine is known for its durability and low maintenance requirements, allowing users to focus more on mowing and less on upkeep.

The 48-inch cutting deck of the PD25PH48STA offers a wide cutting path, allowing for efficient mowing of large areas. The deck is constructed with high-quality materials that ensure longevity and resistance to wear. The adjustable cutting height feature allows users to customize the grass height according to their preferences, providing flexibility for different mowing conditions.

Another notable aspect of the Poulan PD25PH48STA is its hydrostatic transmission system. This technology allows for smooth and effortless operation, enabling users to easily adjust their speed without the need for shifting gears. This ease of use is particularly beneficial when navigating around obstacles or tackling sloped terrains.

In terms of comfort, the PD25PH48STA is equipped with a roomy and comfortable seat, designed to support prolonged use without discomfort. The intuitive control layout enhances user experience, allowing operators to access necessary functions quickly and efficiently.

The mower is also designed with an innovative cutting system that ensures even grass distribution. Its high-performance blades deliver a clean and consistent cut, promoting a healthier lawn.

For convenience, the PD25PH48STA features a simple to use start mechanism making it reliable in various weather and operational conditions. Its compact design allows for easy maneuverability around flower beds and other landscaping features.

In summary, the Poulan PD25PH48STA is a powerful riding lawn mower that combines robust performance with user-friendly features. With its efficient Briggs & Stratton engine, wide cutting deck, hydrostatic transmission, and emphasis on comfort and easy operation, this mower is an excellent investment for anyone looking to maintain their lawn with ease and precision.