SERVICE AND ADJUSTMENTS

TO ADJUST ATTACHMENT CLUTCH (See Fig. 25)

The electric clutch should provide years of service. The clutch has a built-in brake that stops the pulley within 5 seconds. Eventually, the internal brake will wear which may cause the mower blades to not engage, or, to not stop as required. Adjustments should be made by your nearest authorized service center/department.

Make sure attachment clutch and ignition switches are in “OFF” position.

Adjust the three nylon locknuts until space between clutch plate and rotor measures .012" at all three slot locations cut in side of brake plate.

NOTE: After installing a new electric clutch, run tractor at full throttle and engage and disengage electric clutch 10 cycles to wear in clutch plate.

ROTOR

 

 

 

 

00751

SLOT (3)

CLUTCH PLATE

.012"

 

 

NYLON LOCKNUT (3)

 

BRAKE PLATE

FIG. 25

TO CHECK AND ADJUST BRAKE

If tractor requires more than five (5) feet to stop at highest speed in highest gear on a level, dry concrete or paved surface, then brake must be checked and adjusted.

TO CHECK BRAKE

Park tractor on a level, dry concrete or paved surface, depress clutch/brake pedal all the way down and en- gage parking brake.

Disengage transmission by placing freewheel control in “transmission disengaged” position. Pull freewheel control out and into the slot and release so it is held in the disengaged position.

The rear wheels must lock and skid when you try to manually push the tractor forward. If the rear wheels rotate, the brake needs to be adjusted or the pads need to be replaced.

TO ADJUST BRAKE/REPLACE PADS

Contact a qualified service center.

TO REPLACE MOTION DRIVE BELT (See Fig. 26)

Park the tractor on level surface. Engage parking brake. For ease of service there is a belt installation guide decal on bottom of left footrest.

Remove mower (See “TO REMOVE MOWER” in this section of this manual.)

BELT REMOVAL -

Create slack in belt by removing retainer spring from drive belt tension handle.

Remove belt from all idler pulleys, transaxle pulley and then from engine pulley.

BELT INSTALLATION -

Install new belt around engine pulley first, then around transaxle pulley and lastly into all the idler pulleys.

Check to be sure belt is positioned correctly and is on proper side of all belt keepers.

Engage the drive belt tension handle and replace the retainer spring.

Reinstall mower.

 

 

 

 

RETAINER

 

 

 

 

 

SPRING

 

 

 

 

 

DRIVE BELT

 

 

 

 

 

TENSION HANDLE

 

 

02504

 

 

 

 

 

 

 

ENGINE PULLEY

 

 

TRANSAXLE

 

BELT KEEPER

 

PULLEY

 

 

 

 

 

 

 

FLAT IDLER

 

 

 

 

 

 

BELT

 

BELT

BELT

 

2498

KEEPER

 

KEEPER

 

 

 

 

CLUTCHING

CLUTCHING

 

V-IDLER

KEEPER

 

 

 

IDLER

FLAT IDLER

 

 

 

 

FIG. 26

TRANSAXLE MOTION CONTROL LEVER NEUTRAL ADJUSTMENT (See Fig. 27)

The motion control lever has been preset at the factory and adjustment should not be necessary.

Park tractor on level surface. Stop tractor by turning ignition key to “OFF” position and engage parking brake.

Loosen the adjustment bolt in front of the right rear wheel.

Move motion control lever to the neutral position (N).

Tighten the adjustment bolt.

ADJUSTMENT

BOLT

02508

FIG. 27

TRANSMISSION REMOVAL/REPLACEMENT

Should your transmission require removal for service or replacement, it should be purged after reinstallation and before operating the tractor. See“PURGETRANSMISSION” in the Operation section of this manual.

23

Page 23
Image 23
Poulan PKGTH2554 To Adjust Attachment Clutch See Fig, To Check and Adjust Brake, To Replace Motion Drive Belt See Fig

PKGTH2554 specifications

The Poulan PKGTH2554 is a robust and versatile lawn tractor designed to meet the needs of homeowners who desire a reliable machine for maintaining their lawns. Known for its strong performance and a range of useful features, this tractor stands out in the crowded market of residential lawn care equipment.

At the heart of the PKGTH2554 is its powerful 25 HP Kohler engine, which provides ample power to tackle various tasks with ease, whether it’s mowing, bagging, or towing attachments. The engine is equipped with a reliable starter system, ensuring that it fires up quickly and efficiently, making it perfect for both quick lawn care sessions and extended use.

One of the standout features of the PKGTH2554 is its 54-inch cutting deck. This wide deck allows for efficient mowing, covering a larger area in fewer passes, which saves time when maintaining larger lawns. The deck height can be easily adjusted using a lever, giving users the flexibility to choose the perfect cutting height for their lawn's specific needs. This versatility ensures that grass is cut to the desired length, promoting a healthier lawn.

The tractor also boasts a hydrostatic transmission, which enhances maneuverability and ease of use. Unlike traditional gear-driven systems, hydrostatic transmissions allow for smooth and seamless speed adjustments with a simple push of the pedal. This feature is particularly beneficial when navigating around obstacles or working in tight spaces.

In terms of comfort, the PKGTH2554 is equipped with a plush, high-back seat that provides ample support during extended mowing sessions. The user-friendly controls and ergonomic layout of the operator station enhance the overall experience, making it easy for anyone to operate.

For added capability, the PKGTH2554 comes with the option to attach various accessories, including baggers, plows, and other lawn care implements. This adaptability allows homeowners to customize their tractor according to their specific needs and seasonal requirements.

Overall, the Poulan PKGTH2554 delivers a perfect combination of power, versatility, and comfort. With its efficient cutting capabilities, adaptable features, and user-friendly design, it is an excellent choice for homeowners looking to simplify lawn maintenance while achieving professional results.