ASSEMBLY

INSTALL SEAT (See Fig. 3)

Adjust seat before tightening adjustment knob.

•Remove adjustment knob and flat washer securing seat to cardboard packing and set aside for assembly of seat to tractor.

•Pivot seat upward and remove from the cardboard pack- ing. Remove the cardboard packing and discard.

•Place seat on seat pan so head of shoulder bolt is positioned over large slotted hole in pan.

•Push down on seat to engage shoulder bolt in slot and pull seat towards rear of tractor.

•Pivot seat and pan forward and assemble adjustment knob and flat washer loosely. Do not tighten.

•Lower seat into operating position and sit on seat.

•Slide seat until a comfortable position is reached which allows you to press clutch/brake pedal all the way down.

•Get off seat without moving its adjusted position.

•Raise seat and tighten adjustment knob securely.

SEAT

SEAT PAN

SHOULDER

BOLT

FLAT WASHER

ADJUSTMENT

02464

KNOB

 

FIG. 3

NOTE: You may now roll or drive your tractor off the skid. Follow the appropriate instruction below to remove the tractor from the skid.

TO ROLL TRACTOR OFF SKID (See Op- eration section for location and function of controls)

•Press lift lever plunger and raise attachment lift lever to its highest position.

•Release parking brake by depressing brake pedal.

•Place freewheel control in disengaged position to dis- engage transmission (See “TO TRANSPORT” in the Operation section of this manual).

•Roll tractor forward off skid.

TO DRIVE TRACTOR OFF SKID (See Op- eration section for location and function of controls)

WARNING: Before starting, read, understand and follow all instructions in the Operation section of this manual. Be sure tractor is in a well-ventilated area. Be sure the area in front of tractor is clear of other people and objects.

•Be sure all the above assembly steps have been com- pleted.

•Check engine oil level and fill fuel tank with gasoline.

•Place freewheel control in "transmission engaged" position (see "TO TRANSPORT" in Operation section of this manual).

•Sit on seat in operating position, depress brake pedal and set the parking brake.

•Press lift lever plunger and raise attachment lift lever to its highest position.

•Start the engine.After engine has started, move throttle control to idle position.

•Release parking brake.

•Slowly move the motion control lever forward and slowly drive tractor off skid.

•Apply brake to stop tractor and set parking brake.

•Turn ignition key to "STOP" position.

Continue with the instructions that follow.

ASSEMBLE GAUGE WHEELS TO MOWER DECK (See Fig. 4 and 5)

The gauge wheels are designed to keep the mower deck in proper position when operating mower.

•Slide gauge wheel bar down into bracket channel, Be sure that gauge wheel bar aligning holes are on top. Assemble gauge wheels as shown using shoulder bolts, 3/8 washers and 3/8-16 center locknuts and tighten securely.

•For ease of mower to tractor assembly, set all the gauge wheels in the fourth hole from top. Retain with clevis pins and spring retainers.

RETAINER SPRING

PIN

 

SHOULDER

 

BOLT

 

ADJUSTING

 

BAR

 

GAUGE

 

WHEEL

3/8-16 CENTER

 

3/8 WASHER

LOCKNUT

 

FIG. 4

SET ALL WHEELS

TO 4TH HOLE

FROM TOP

FIG. 5

7

Page 6 Page 8
Page 7
Image 7
Poulan PKGTH2554 manual Install Seat See Fig, Assemble Gauge Wheels to Mower Deck See
Page 6 Page 8

PKGTH2554 specifications

The Poulan PKGTH2554 is a robust and versatile lawn tractor designed to meet the needs of homeowners who desire a reliable machine for maintaining their lawns. Known for its strong performance and a range of useful features, this tractor stands out in the crowded market of residential lawn care equipment.

At the heart of the PKGTH2554 is its powerful 25 HP Kohler engine, which provides ample power to tackle various tasks with ease, whether it’s mowing, bagging, or towing attachments. The engine is equipped with a reliable starter system, ensuring that it fires up quickly and efficiently, making it perfect for both quick lawn care sessions and extended use.

One of the standout features of the PKGTH2554 is its 54-inch cutting deck. This wide deck allows for efficient mowing, covering a larger area in fewer passes, which saves time when maintaining larger lawns. The deck height can be easily adjusted using a lever, giving users the flexibility to choose the perfect cutting height for their lawn's specific needs. This versatility ensures that grass is cut to the desired length, promoting a healthier lawn.

The tractor also boasts a hydrostatic transmission, which enhances maneuverability and ease of use. Unlike traditional gear-driven systems, hydrostatic transmissions allow for smooth and seamless speed adjustments with a simple push of the pedal. This feature is particularly beneficial when navigating around obstacles or working in tight spaces.

In terms of comfort, the PKGTH2554 is equipped with a plush, high-back seat that provides ample support during extended mowing sessions. The user-friendly controls and ergonomic layout of the operator station enhance the overall experience, making it easy for anyone to operate.

For added capability, the PKGTH2554 comes with the option to attach various accessories, including baggers, plows, and other lawn care implements. This adaptability allows homeowners to customize their tractor according to their specific needs and seasonal requirements.

Overall, the Poulan PKGTH2554 delivers a perfect combination of power, versatility, and comfort. With its efficient cutting capabilities, adaptable features, and user-friendly design, it is an excellent choice for homeowners looking to simplify lawn maintenance while achieving professional results.
Top Page Image Contents