Poulan PO15538D To Start Engine with a Weak Battery See Fig, To Adjust Steering Wheel ALIGN- Ment

Models: PO15538D

1 28
Download 28 pages 59.63 Kb
Page 21
Image 21

SERVICE AND ADJUSTMENTS

ENGINE

PULLEY

CLUTCHING

IDLER

CENTER SPAN KEEPER

00811

STATIONARY IDLER

TRANSAXLE PULLEY

TO START ENGINE WITH A WEAK BATTERY (See Fig. 22)

WARNING: Lead-acid batteries gen- erate explosive gases. Keep sparks, flame and smoking materials away from batteries. Always wear eye protection when around batteries.

If your battery is too weak to start the engine, it should be recharged. (See "BATTERY" in the MAINTENANCE sec- tion of this manual).

If “jumper cables” are used for emergency starting, follow this procedure:

IMPORTANT: YOUR TRACTOR IS EQUIPPED WITH A 12 VOLT SYSTEM. THE OTHER VEHICLE MUST ALSO BE A 12 VOLT SYSTEM. DO NOT USE YOUR TRACTOR BATTERY TO START OTHER VEHICLES.

TO ATTACH JUMPER CABLES -

FIG. 20

TO ADJUST STEERING WHEEL ALIGN- MENT

If steering wheel crossbars are not horizontal (left to right) when wheels are positioned straight forward, remove steer- ing wheel and reassemble per instructions in the Assembly section of this manual.

FRONT WHEEL TOE-IN/CAMBER

The front wheel toe-in and camber are not adjustable on your tractor. If damage has occurred to affect the front wheel toe-in or camber, contact your nearest authorized service center/department.

TO REMOVE WHEEL FOR REPAIRS (See Fig. 21)

Block up axle securely.

Remove axle cover, retaining ring and washers to allow wheel removal (rear wheel contains a square key - Do not lose).

Repair tire and reassemble.

On rear wheels only: align grooves in rear wheel hub and axle. Insert square key.

Replace washers and snap retaining ring securely in axle groove.

Replace axle cover.

NOTE: To seal tire punctures and prevent flat tires due to slow leaks, tire sealant may be purchased from your local parts dealer. Tire sealant also prevents tire dry rot and corrosion.

WASHERS

RETAINING RING

AXLE COVER

SQUARE KEY

(REAR WHEEL ONLY)

FIG. 21

Connect one end of the RED cable to the POSITIVE

(+)terminal of each battery(A-B), taking care not to short against tractor chassis.

Connect one end of the BLACK cable to the NEGATIVE (-) terminal (C) of fully charged battery.

Connect the other end of the BLACK cable (D) to good chassis ground, away from fuel tank and battery.

TO REMOVE CABLES, REVERSE ORDER -

BLACK cable first from chassis and then from the fully charged battery.

RED cable last from both batteries.

02614

WEAK OR DEAD

FULLY CHARGED

BATTERY

BATTERY

FIG. 22

REPLACING BATTERY (See Figs. 23 and 24)

WARNING: Do not short battery terminals by allowing a wrench or any other object to contact both terminals at the same time. Before connect- ing battery, remove metal bracelets, wristwatch bands, rings, etc.

Positive terminal must be connected first to prevent sparking from acci- dental grounding.

Lift seat pan to raised position.

Disconnect BLACK battery cable first then RED battery cable and carefully remove battery from tractor.

Install new battery with terminals in same position as old battery.

First connect RED battery cable to positive (+) terminal with hex bolt and keps nut as shown. Tighten securely.

21Slide terminal cover over terminal.

Page 21
Image 21
Poulan PO15538D manual To Start Engine with a Weak Battery See Fig, To Adjust Steering Wheel ALIGN- Ment

PO15538D specifications

The Poulan PO15538D is a robust and dependable riding lawn mower designed to meet the needs of homeowners with medium to large properties. This machine combines power, comfort, and advanced features to deliver exceptional performance and ease of use, making it a popular choice among lawn care enthusiasts.

One of the standout features of the Poulan PO15538D is its powerful engine. Equipped with a reliable 15.5-horsepower Briggs & Stratton engine, this mower provides ample power to tackle thick grass and uneven terrain. The engine is designed for easy starting and efficient fuel consumption, ensuring that users can spend more time mowing and less time worrying about maintenance.

The PO15538D boasts a 38-inch cutting deck, which strikes the perfect balance between maneuverability and coverage. This size allows for efficient mowing in tighter spaces while still providing a wide enough cutting path to make quick work of larger lawns. The cutting height is adjustable with six different settings, allowing users to customize their mowing experience according to grass type and personal preference.

Comfort is a priority in the design of the Poulan PO15538D. It features a comfortable, plush seat with a high back for added support during long mowing sessions. The intuitive steering wheel and responsive controls make it easy for users to navigate their lawns smoothly, reducing fatigue and enhancing maneuverability. Additionally, the mower's compact design allows for easier storage in garages or sheds.

In terms of technology, the Poulan PO15538D comes equipped with a pedal-operated hydrostatic transmission. This allows for seamless speed adjustments without the need for manual shifting, providing a smoother driving experience. The mower’s durable construction ensures it can withstand the rigors of regular use, while its headlights allow for mowing in low-light conditions.

The Poulan PO15538D also features a mulching option, which promotes healthy lawn growth by returning finely chopped grass clippings to the soil. This not only reduces yard waste but also provides essential nutrients to the lawn. Overall, the Poulan PO15538D is an excellent combination of power, comfort, and advanced features, making it a reliable choice for homeowners looking to maintain their yards efficiently. With its user-friendly design and sturdy construction, this riding mower is built to deliver optimal performance season after season.