SERVICE AND ADJUSTMENTS

•Push clutch cable housing guide into bracket, slide col- lar onto guide and secure with large retainer spring.

•Place flat washer and clutch spring on idler pulley bolt and secure with small retainer spring.

•Install belt onto engine pulley.

TO LEVEL MOWER HOUSING

Adjust the mower while tractor is parked on level ground or driveway. Make sure tires are properly inflated (See “PRODUCT SPECIFICATIONS” section of this manual). If tires are over or underinflated, you will not properly adjust your mower.

SIDE-TO-SIDE ADJUSTMENT (See Figs. 14 and 15)

•Raise mower to its highest position.

•At the midpoint of both sides of mower, measure height from bottom edge of mower to ground. Distance “A” on both sides of mower should be the same or within 1/4" of each other.

•If adjustment is necessary, make adjustment on one side of mower only.

•To raise one side of mower, tighten lift link adjustment nut on that side.

•To lower one side of mower, loosen lift link adjustment nut on that side.

NOTE: Three full turns of adjustment nut will change mower height about 1/8".

•Recheck measurements after adjusting.

BOTTOM EDGE OF

 

BOTTOM EDGE

MOWER

00598

OF MOWER

TO GROUND

 

TO GROUND

“A”“A”

GROUND LINE

FIG. 14

SUSPENSION ARM

01553

LIFT LINK

ADJUSTMENT

NUT

FIG. 15

FRONT-TO-BACK ADJUSTMENT (See Figs. 16 and 17)

IMPORTANT: DECK MUST BE LEVEL SIDE-TO-SIDE. IF THE FOLLOWING FRONT-TO-BACK ADJUSTMENT IS NECESSARY, BE SURE TO ADJUST BOTH FRONT LINKS EQUALLY SO MOWER WILL STAY LEVEL SIDE-TO-SIDE.

To obtain the best cutting results, the mower housing should be adjusted so that the front is approximately 1/8" to 1/2" lower than the rear when the mower is in its high- est position.

Check adjustment on right side of tractor. Measure distance “D” directly in front and behind the mandrel at bottom edge of mower housing as shown.

•Before making any necessary adjustments, check that both front links are equal in length.

•If links are not equal in length, adjust one link to same length as other link.

•To lower front of mower loosen nut “E” on both front links an equal number of turns.

•When distance “D” is 1/8" to 1/2" lower at front than rear, tighten nuts “F” against trunnion on both front links.

•To raise front of mower, loosen nut “F” from trunnion on both front links. Tighten nut “E” on both front links an equal number of turns. The two front links must remain equal in length.

•When distance “D” is 1/8" to 1/2" lower at front than rear, tighten nut “F” against trunnion on both front links.

•Recheck side-to-side adjustment.

MANDREL

01268

"D"

"D"

FIG. 16

BOTH FRONT LINKS MUST BE EQUAL IN LENGTH

01267

NUT "F"

NUT "E"

TRUNNION

FRONT LINKS

FIG. 17

19

Page 18 Page 20
Page 19
Image 19
Poulan PO15538D manual To Level Mower Housing, FRONT-TO-BACK Adjustment See Figs
Page 18 Page 20

PO15538D specifications

The Poulan PO15538D is a robust and dependable riding lawn mower designed to meet the needs of homeowners with medium to large properties. This machine combines power, comfort, and advanced features to deliver exceptional performance and ease of use, making it a popular choice among lawn care enthusiasts.

One of the standout features of the Poulan PO15538D is its powerful engine. Equipped with a reliable 15.5-horsepower Briggs & Stratton engine, this mower provides ample power to tackle thick grass and uneven terrain. The engine is designed for easy starting and efficient fuel consumption, ensuring that users can spend more time mowing and less time worrying about maintenance.

The PO15538D boasts a 38-inch cutting deck, which strikes the perfect balance between maneuverability and coverage. This size allows for efficient mowing in tighter spaces while still providing a wide enough cutting path to make quick work of larger lawns. The cutting height is adjustable with six different settings, allowing users to customize their mowing experience according to grass type and personal preference.

Comfort is a priority in the design of the Poulan PO15538D. It features a comfortable, plush seat with a high back for added support during long mowing sessions. The intuitive steering wheel and responsive controls make it easy for users to navigate their lawns smoothly, reducing fatigue and enhancing maneuverability. Additionally, the mower's compact design allows for easier storage in garages or sheds.

In terms of technology, the Poulan PO15538D comes equipped with a pedal-operated hydrostatic transmission. This allows for seamless speed adjustments without the need for manual shifting, providing a smoother driving experience. The mower’s durable construction ensures it can withstand the rigors of regular use, while its headlights allow for mowing in low-light conditions.

The Poulan PO15538D also features a mulching option, which promotes healthy lawn growth by returning finely chopped grass clippings to the soil. This not only reduces yard waste but also provides essential nutrients to the lawn. Overall, the Poulan PO15538D is an excellent combination of power, comfort, and advanced features, making it a reliable choice for homeowners looking to maintain their yards efficiently. With its user-friendly design and sturdy construction, this riding mower is built to deliver optimal performance season after season.
Top Page Image Contents