SERVICE AND ADJUSTMENTS

IDLER PULLEYS

MANDREL PULLEYS

FIG. 20

TO CHECK AND ADJUST BRAKE (See Fig. 21)

Your tractor is equipped with an adjustable brake system which is mounted on the right side of the transaxle.

If tractor requires more than five (5) feet to stop at highest speed in highest gear on a level, dry concrete or paved surface, then brake must be checked and adjusted.

TO CHECK BRAKE

•Park tractor on a level, dry concrete or paved surface, depress clutch/brake pedal all the way down and en- gage parking brake.

•Place gear shift lever in neutral (N) position.

The rear wheels must lock and skid when you try to manually push the tractor forward. If the rear wheels rotate, the brake needs to be adjusted or the pads need to be replaced.

TO ADJUST BRAKE

•Depress clutch/brake pedal all the way down and en- gage parking brake.

•Measure distance between brake operating arm and nut “A” on brake rod.

•If distance is other than 1-1/2", loosen jam nut and turn nut “A” until distance becomes 1-1/2". Retighten jam nut against nut “A”.

•Road test tractor for proper stopping distance as stated above. Readjust if necessary. If stopping distance is still greater than five (5) feet in highest gear, further maintenance is necessary. Replace brake pads or contact a qualified service center.

WITH PARKING BRAKE “ENGAGED”

1-1/2"

NUT “A”

JAM NUT

OPERATING ARM

FIG. 21

TO REPLACE MOTION DRIVE BELT (See Fig. 22)

Park the tractor on level surface. Engage parking brake. For assistance, there is a belt installation guide decal on bottom side of left footrest.

BELT REMOVAL -

•Remove mower (See “TO REMOVE MOWER” in this section of manual).

NOTE: Observe entire motion drive belt and position of all belt guides and keepers.

•Remove belt from stationary idler and clutching idler.

•Remove belt downward from around engine pulley.

•Pull belt slack toward rear of tractor. Remove belt upwards from transaxle pulley by deflecting belt keep- ers.

•Remove belt from center span keeper and pull belt away from tractor.

BELT INSTALLATION -

•Carefully work new belt down between transaxle belt keepers and onto the input pulley.

•Slide belt into the center span keeper.

•Pull belt toward front of tractor and roll around the top groove of engine pulley.

•Install belt through stationary idler and clutching idler.

•Make sure belt is in all pulley grooves and inside all belt guides and keepers.

•Install mower (See “TO INSTALL MOWER” in this sec- tion of manual).

20

Page 19 Page 21
Page 20
Image 20
Poulan PO1742STC To Check and Adjust Brake See Fig, To Replace Motion Drive Belt See Fig, To Check Brake, To Adjust Brake
Page 19 Page 21

PO1742STC specifications

The Poulan PO1742STC is a robust and versatile lawn tractor designed to meet the needs of both residential and semi-professional users. Engineered to provide optimum performance and reliability, this machine is a go-to solution for maintaining expansive lawns, gardens, and recreational areas.

One of the standout features of the PO1742STC is its powerful 17.5-horsepower Briggs & Stratton engine. This air-cooled, single-cylinder engine provides ample power, making it capable of tackling various terrain conditions and grass thickness. Coupled with an automatic transmission, operators can experience smooth and effortless speed adjustments without needing to shift gears manually.

The cutting system on the Poulan PO1742STC boasts a 42-inch cutting deck, equipped with twin blades. This setup not only offers an impressive cutting width, allowing users to cover more ground efficiently, but also delivers a clean and precise cut. The adjustable cutting height feature enables operators to choose from six different settings, ensuring the perfect lawn finish whether they desire a closer trim or taller grass for cooler months.

Another remarkable aspect of this lawn tractor is its user-friendly design. The comfortable high-back seat promotes an ergonomic riding experience, reducing fatigue during longer mowing sessions. The easy-to-reach controls and large steering wheel add to the convenience, facilitating a smooth and manageable operation.

In terms of technology, the Poulan PO1742STC is equipped with an innovative cutting height adjustment lever, making it simple to modify grass height on the go. This feature, combined with the tractor's tight turning radius, enhances maneuverability, allowing users to navigate around flowerbeds and other obstacles with ease.

Moreover, the lawn tractor's durable build quality ensures longevity and resistance against wear and tear. The steel frame and robust components stand up to prolonged use, making it an excellent investment for homeowners and lawn care professionals alike.

The Poulan PO1742STC is also compatible with various attachments, expanding its functionality. Users can attach a bagger, mulcher, or even a snow blade, transforming the tractor into an all-season tool.

In summary, the Poulan PO1742STC is an efficient, power-packed lawn tractor featuring a dependable engine, versatile cutting deck, user-friendly controls, and adaptability for various tasks. Its combination of performance, durability, and convenience makes it a solid choice for anyone looking to maintain their outdoor space effectively.
Top Page Image Contents