Poulan PP133 HOW to Stop Your Unit, HOW to Start Your Unit, Starting a Warm Engine

Models: PP133

1 18
Download 18 pages 60.15 Kb
Page 11
Image 11

2--stroke gasoline engines. Use of alternative fuels will cause problems such as: improper clutch engagements, overheating, vapor lock, power loss, lubrication deficiency, deterioration of fuel lines, gaskets and internal carburetor components, etc. Alternative fuels cause high moisture absorption into the fuel/oil mixture leading to oil and fuel separation.

HOW TO STOP YOUR UNIT

SRelease the throttle trigger.

S Push and release the engine ON/STOP switch. The switch will automatically return to the ON position. Wait 5 seconds before attempting to restart unit to allow switch to reset.

ON/STOP Switch

HOW TO START YOUR UNIT

WARNING: Avoid any contact with the muffler. A hot muffler can cause serious burns.

Starting position

HELPFUL TIP

If your engine still does not start after following these instructions, please call 1-800-554-6723.

STARTING A COLD ENGINE (or a warm engine after running out of fuel)

NOTE: DO NOT squeeze the throttle trigger until the engine has started and runs.

1.Set unit on a flat surface.

2.Slowly press the primer bulb 6 times.

3.Move the start lever to the START position.

Primer Starter

Bulb Handle

5.Allow unit to run for 10--15 seconds, then fully squeeze the throttle trigger to disen- gage the starting system.

STARTING A WARM ENGINE

Pull starter rope sharply until engine starts and runs.

NOTE: Normally, the warm starting procedure can be used within 5 -- 10 minutes after the unit is turned STOP. If the unit sits for more than 10 minutes without being run, it will be necessary to start the unit by following the steps under STARTING A COLD ENGINE or following the starting instruction steps shown on the unit.

STARTING A FLOODED ENGINE

Move the start lever to the RUN position and fully squeeze throttle trigger. Pull the starter handle repeatedly while squeezing throttle trigger until engine starts and runs. This could require pulling the starter handle many times, depending on how badly the unit is flooded. If the unit still doesn’t start, refer to TROUBLE- SHOOTING TABLE or call 1-800-554-6723.

OPERATING THE COUPLER

This model is equipped with a coupler which enables optional attachments to be installed. The optional attachments are:

MODEL: Edger . . . . . . . . . . . . . . . . . . . . . PP1000E Cultivator . . . . . . . . . . . . . . . . . . PP2000T Blower . . . . . . . . . . . . . . . . . . . . PP3000B Brushcutter . . . . . . . . . . . . . . . . PP4000C Pruner . . . . . . . . . . . . . . . . . . . . PP5000P Pruner . . . . . . . . . . . . . . . . . . . . PP5500P

WARNING: Always stop unit and dis- connect spark plug before removing or instal- ling attachments.

REMOVING TRIMMER ATTACH- MENT (OR OTHER OPTIONAL ATTACHMENTS)

CAUTION: When removing or installing at- tachments, place the unit on a flat surface for stability.

1.Loosen the coupler by turning the knob counterclockwise.

Upper

Couplershaft

LOOSEN

Attachment

ThrottleMuffler

Trigger Start

Lever

4.Pull starter rope handle sharply until en- gine starts and runs.

TIGHTEN Knob

2.Press and hold the locking/release button. Locking/release

button

Coupler

Upper shaft

Attachment

 

3.While securely holding the engine and upper shaft, pull the attachment straight out of the coupler.

11

Page 11
Image 11
Poulan PP133 HOW to Stop Your Unit, HOW to Start Your Unit, Starting a Warm Engine, Starting a Flooded Engine

PP133 specifications

The Poulan PP133 is a versatile and powerful chainsaw designed for both homeowners and professionals seeking a reliable tool for various cutting tasks. As a part of Poulan’s trusted lineup of outdoor equipment, the PP133 offers a blend of performance, efficiency, and ease of use, making it a popular choice among users.

One of the standout features of the Poulan PP133 is its 33cc 2-cycle engine. This powerful engine provides ample power for cutting through hardwoods, softwoods, and even branches with ease. The gas-powered design delivers the rugged performance needed for heavy-duty jobs while maintaining a lightweight feel that enhances maneuverability. The engine also employs advanced fuel technology, enabling optimal fuel efficiency and reduced emissions, thus promoting environmentally friendly operation.

The chainsaw is equipped with a 16-inch steel blade designed for precision cutting. This size strikes a balance between power and control, making it suitable for a variety of applications, such as pruning, limbing, and even felling small trees. The blade's sharpness, combined with the saw's automatic oiler, ensures that cutting remains smooth and efficient over prolonged usage, reducing wear and tear on the chain and bar.

Ease of operation is another hallmark of the Poulan PP133. Its ergonomic design features a comfortable grip and a lightweight structure, reducing user fatigue during extended use. The chainsaw also includes a simple starting mechanism, facilitating quick ignition without excessive effort, even in challenging conditions. Additionally, the anti-vibration technology integrated into the design minimizes discomfort, allowing users to tackle tough tasks with less strain.

Safety is paramount in chainsaw design, and the PP133 does not disappoint. It is equipped with a chain brake feature that stops the chain immediately in case of kickback, significantly enhancing user safety. Furthermore, the saw meets high safety standards, ensuring that both novice and experienced users can operate it confidently.

In summary, the Poulan PP133 is a well-rounded chainsaw that merges power, efficiency, and safety in a compact design. Its robust 33cc engine, 16-inch cutting blade, ergonomic features, and advanced safety mechanisms make it an ideal choice for anyone looking to tackle outdoor cutting tasks effectively. Whether you're a homeowner maintaining your yard or a professional needing a reliable saw, the Poulan PP133 is designed to deliver exceptional performance and durability.