Manuals / Poulan / Lawn and Garden / Trimmer

Poulan PP133 Service and Adjustments, Inspect Muffler and Spark Arresting Screen

Models: PP133

1 18
Download 18 pages 60.15 Kb
Page 14
Image 14

3.Wash the filter in soap and water.

4.Allow filter to dry.

5.Replace parts.

Air Filter

Knob

Air Filter Cover

INSPECT MUFFLER AND SPARK ARRESTING SCREEN

WARNING: The muffler on this prod- uct contains chemicals known to the State of California to cause cancer.

As your unit is used, carbon deposits build up on the muffler and spark arresting screen and must be removed to avoid creating a fire haz- ard or affecting engine performance.

For normal homeowner use, the muffler and spark arresting screen will not require any service. After 50 hours of use, we recom- mend that your muffler be serviced or re- placed by an authorized service dealer.

REPLACE SPARK PLUG

Replace the spark plug each year to ensure the engine starts easier and runs better. In- spect spark plug every 25 hours of usage. Clean and/or replace as necessary. Set spark plug gap at 0.025 inch (0.6 mm). Ignition tim- ing is fixed and nonadjustable.

1.Twist, then pull off spark plug boot.

2.Remove spark plug from cylinder and discard.

3.Replace with Champion RCJ-6Y spark plug and tighten securely with a 3/4 inch (19 mm) socket wrench.

4.Reinstall the spark plug boot.

SERVICE AND ADJUSTMENTS

REPLACING THE LINE

For unit to operate properly, the cutting line should be replaced when line becomes worn to less than 3 inches in length from the edge of the line exit tunnels on each side of the cutting head.

1.Remove and discard worn line before installing new line.

2.Use only 0.115 inch (3 mm) diameter Poulan PRO brand cut length line.

3.Insert one end of the line through the positioning tunnel.

4.Continue to feed line through tunnel until line is centered (leaving equal amounts on each side). See illustration below.

Positioning tunnel

5.Insert ends of line one at a time through the line exit tunnels.

6.Pull the line and make sure the line is ex- tended fully through the tunnels.

Line exit

Line exit

tunnel

tunnel

7.Correctly installed line will be the same length on both ends.

REPLACING THE CUTTING HEAD

1.Align hole in the dust cup with the hole in the side of the gearbox by rotating the dust cup.

2.Insert a small screwdriver into aligned holes. This will keep the shaft from turning while removing and installing trimmer head.

Screwdriver

3.While holding the screwdriver in position, remove trimmer head by turning clock- wise (looking from bottom of unit).

4.Thread replacement trimmer head onto the shaft by turning counterclockwise. Tighten until secure.

5.Remove the screwdriver.

14

Page 13 Page 15
Page 14
Image 14
Poulan PP133 Service and Adjustments, Inspect Muffler and Spark Arresting Screen, Replace Spark Plug, Replacing the Line
Page 13 Page 15

PP133 specifications

The Poulan PP133 is a versatile and powerful chainsaw designed for both homeowners and professionals seeking a reliable tool for various cutting tasks. As a part of Poulan’s trusted lineup of outdoor equipment, the PP133 offers a blend of performance, efficiency, and ease of use, making it a popular choice among users.

One of the standout features of the Poulan PP133 is its 33cc 2-cycle engine. This powerful engine provides ample power for cutting through hardwoods, softwoods, and even branches with ease. The gas-powered design delivers the rugged performance needed for heavy-duty jobs while maintaining a lightweight feel that enhances maneuverability. The engine also employs advanced fuel technology, enabling optimal fuel efficiency and reduced emissions, thus promoting environmentally friendly operation.

The chainsaw is equipped with a 16-inch steel blade designed for precision cutting. This size strikes a balance between power and control, making it suitable for a variety of applications, such as pruning, limbing, and even felling small trees. The blade's sharpness, combined with the saw's automatic oiler, ensures that cutting remains smooth and efficient over prolonged usage, reducing wear and tear on the chain and bar.

Ease of operation is another hallmark of the Poulan PP133. Its ergonomic design features a comfortable grip and a lightweight structure, reducing user fatigue during extended use. The chainsaw also includes a simple starting mechanism, facilitating quick ignition without excessive effort, even in challenging conditions. Additionally, the anti-vibration technology integrated into the design minimizes discomfort, allowing users to tackle tough tasks with less strain.

Safety is paramount in chainsaw design, and the PP133 does not disappoint. It is equipped with a chain brake feature that stops the chain immediately in case of kickback, significantly enhancing user safety. Furthermore, the saw meets high safety standards, ensuring that both novice and experienced users can operate it confidently.

In summary, the Poulan PP133 is a well-rounded chainsaw that merges power, efficiency, and safety in a compact design. Its robust 33cc engine, 16-inch cutting blade, ergonomic features, and advanced safety mechanisms make it an ideal choice for anyone looking to tackle outdoor cutting tasks effectively. Whether you're a homeowner maintaining your yard or a professional needing a reliable saw, the Poulan PP133 is designed to deliver exceptional performance and durability.